[Serusers] SER log
Jan Janak
jan at iptel.org
Sun Mar 16 16:30:19 CET 2003
Hello,
On 16-03 10:15, Bo wrote:
> Hi Mathi,
>
> Thanks for your suggestion.
>
> I re-installed the ser-0.8.10-2.i386.rpm on Redhat 8.0. This time with the
> default /usr/local/etc/ser/ser.cfg (lib is under
> /usr/local/lib/ser/modules), SER could start without any problem. But
> when I just changed 'if (uri==mydomain)' to 'if(uri==xxx.com)', it showed
> 'ERROR: bad config file (11 errors)'. Is there anything wrong?
if (uri=~"xxx\.com")
Please see http://iptel.org/ser/admin.html
Jan.
>
> Regards
> ----- Original Message -----
> From: "sipdev" <sipdev at xten.com>
> To: "Bo" <boman122 at yahoo.com>
> Cc: "mark at xten.com" <erik at xten.com>
> Sent: Saturday, March 15, 2003 10:55 AM
> Subject: RE: Re: [Serusers] SER log
>
>
> > Hi Bo,
> > we compiled the SER(8.10 linuxi386 ) in redhat linux 8.0.
> > we placed the ser folder in desktop and tried to run that.
> > It gave errors when i.e unable to find ser.cfg.Then we copied the
> ser.cfg and the lib folder to the home directory i.e
> > /usr/local....
> >
> > Now ser is working fine.
> > please try this.
> >
> > Regards,
> > Mathi
> >
> >
> >
> > Original Message -----------------------
> > Thanks Emil.
> >
> > Yes, after I comment the PSTN gateway part, it worked. Lots of error
> messages came out during the bootup of the server. I doubt there must be
> something wrong with the re-compilation.
> >
> > I tried the precomiled version (rpm package) on Redhat linux 8.0 first.
> But the server couldn't bootup (it showed 'Terminated' when booting). Has
> anyone ever compiled SER on Redhat 8.0?
> >
> > Regards
> > Bo
> > ----- Original Message -----
> > From: Emil
> > To: Bo
> > Sent: Friday, March 14, 2003 6:23 PM
> > Subject: Re: [Serusers] SER log
> >
> >
> > Hi Bo,
> >
> > Just change the if uri== back to myself for testing.
> >
> > Have you tried the precompiled version?
> >
> > When I start the service (service ser start) on no fork and debug 9 the
> service should look like it is hanging, oops and change log_stderror=no to
> yes.
> >
> > Tail /var/log/message again and let me know.
> >
> > E
> > ----- Original Message -----
> > From: Bo
> > To: serusers at lists.iptel.org
> > Sent: Saturday, March 15, 2003 1:14 AM
> > Subject: Re: [Serusers] SER log
> >
> >
> > Hi Emil,
> >
> > Thanks for your infor.
> >
> > I tried and it still didn't work. Now I doubt if the /etc/ser/ser.cfg
> (see the following) takes effect or not. I changed the settings and if I ran
> the server by command ' # ser ', no problem. But if I ran it like ' # ser -f
> ser.cfg ', then it told me
> > ERROR: bad config file (11 errors)
> > Actually I didn't change too much on the default ser.cfg.
> >
> > Pls indicate.
> >
> ____________________________________________________________________________
> _____
> > #
> > # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $
> > #
> > # simple quick-start config script
> > #
> >
> > # ----------- global configuration parameters ------------------------
> >
> > debug=9 # debug level (cmd line: -dddddddddd)
> > fork=no
> > log_stderror=no # (cmd line: -E)
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> >
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > #loadmodule "//usr/lib/ser/modules/mysql.so"
> >
> > loadmodule "//usr/lib/ser/modules/sl.so"
> > loadmodule "//usr/lib/ser/modules/tm.so"
> > loadmodule "//usr/lib/ser/modules/rr.so"
> > loadmodule "//usr/lib/ser/modules/maxfwd.so"
> > loadmodule "//usr/lib/ser/modules/usrloc.so"
> > loadmodule "//usr/lib/ser/modules/registrar.so"
> >
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> > #loadmodule "//usr/lib/ser/modules/auth.so"
> >
> > # ----------------- setting module-specific parameters ---------------
> >
> > # -- usrloc params --
> >
> > modparam("usrloc", "db_mode", 0)
> >
> > # Uncomment this if you want to use SQL database
> > # for persistent storage and comment the previous line
> > #modparam("usrloc", "db_mode", 2)
> >
> > # -- auth params --
> > # Uncomment if you are using auth module
> > #
> > #modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
> > #modparam("auth", "calculate_ha1", yes)
> > #
> > # If you set "calculate_ha1" parameter to yes (which true in this
> config),
> > # uncomment also the following parameter)
> > #
> > #modparam("auth", "password_column", "password")
> >
> > # ------------------------- request routing logic -------------------
> >
> > # main routing logic
> >
> > route{
> >
> > # initial sanity checks -- messages with
> > # max_forwars==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> > if (len_gt( max_len )) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # Do strict routing if pre-loaded route headers present
> > rewriteFromRoute();
> >
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> > if (uri==sip.mycompany.com) {
> >
> > if (method=="REGISTER") {
> >
> > # Uncomment this if you want to use digest authentication
> > # if (!www_authorize("iptel.org", "subscriber"))
> {
> > # www_challenge("iptel.org", "0");
> > # break;
> > # };
> >
> > save("location");
> > break;
> > };
> >
> > # attempt handoff to PSTN
> > if (uri=~"^sip:[0-9]*@sip.mycompany.com") {
> > log(4, "Forwarding to PSTN\n");
> > forward(X.X.X.X,5060);
> > break;
> > };
> >
> > # native SIP destinations are handled using our USRLOC
> DB
> > if (!lookup("location")) {
> > sl_send_reply("404", "Not Found");
> > break;
> > };
> > };
> > # forward to current uri now
> > if (!t_relay()) {
> > sl_reply_error();
> > };
> >
> > }
> >
> ____________________________________________________________________________
> _
> >
> > ----- Original Message -----
> > From: Emil
> > To: Bo
> > Sent: Friday, March 14, 2003 5:43 PM
> > Subject: Re: [Serusers] SER log
> >
> >
> > Hi Bo,
> >
> > Jan just helped me with a similar problem.
> >
> > Debug level = 9 and fork t= no.
> >
> > Tail /var/log messages and you will get plenty of info.
> >
> > Emil
> > ----- Original Message -----
> > From: Bo
> > To: serusers at lists.iptel.org
> > Sent: Saturday, March 15, 2003 12:35 AM
> > Subject: [Serusers] SER log
> >
> >
> > Hi,
> >
> > Does anyone have any clue on the following problem?
> >
> > I recompiled and installed SER in Redhat Linux 8.0. Unfortunately
> I tried all the possible options (debug level) in the ser.cfg, but the only
> messages I could see in the /var/log/messsages are as follows.
> >
> > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is
> initially 65535
> > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is
> finally 262142
> > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is
> initially 65535
> > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is
> finally 262142
> > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is
> initially 65535
> > Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is
> finally 262142
> > Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316
> > Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up
> at /tmp/ser_fifo...
> >
> > What should I do to see the detailed debugs?
> >
> > Thanks,
> >
> > Bo
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20030316/a387ca13/attachment.pgp>
More information about the sr-users
mailing list