[Serusers] caller-id with raius using sip-rpid
Jan Janak
jan at iptel.org
Tue Oct 7 12:57:21 CEST 2003
Hello,
I think that ATA doesn't support Remote-Party-ID. One might be surprised
that some implementations from CISCO do and some don't. That's quite
common actually, because ATA had been produced by company called Komodo
before CISCO acquired them (I don't know details). So, there are many
implementations labeled "CISCO" but they don't seem to use a common SIP
stack.
Jan.
On 06-10 12:40, Steve Dolloff wrote:
> OK, I understand now. The caller-id works correctly when I call out to
> the PSTN through a Cisco AS5350 gateway. The caller-id does not work
> when I call another ATA. I have to assume that the ATA does not support
> the remote-party-id field. Anyone else have experience with this, since
> I don't see any documentation related to remote-party-id on an ATA?
> I'll also post this to the cisco message boards and re-post any response
> that I get.
>
> Stephen
>
> Subject: RE: [Serusers] caller-id with raius using sip-rpid
>
> Well, as you see, rpid is attached to a non-numeric subscriber's
> request, so that it can be processed by devices capable of doing
> so. What is the problem then?
>
> -jiri
>
> At 11:21 PM 10/3/2003, Steve Dolloff wrote:
> >I want caller-id to work for a subscriber who has a non-numeric
> >username.
> >
> >Subject: Re: [Serusers] caller-id with raius using sip-rpid
> >
> >There is a Remote-Party-ID header in your message. What else do you
> >want ? Please be more specific and provide some examples, your
> >terminology is
> >hard to follow for me, sorry.
> >
> > Jan.
> >
> >On 03-10 16:05, Steve Dolloff wrote:
> >> Calling from one ata to another, proxied and registered through ser,
> >> here is my ngrep port 5060 output. Remote-party-id is being set but
> >not
> >> the call-id.
> >>
> >> U 219.242.10.153:5060 -> 226.145.234.80:5060
> >> INVITE sip:256 at 226.145.234.80:5060;user=phone;transport=udp
> >> SIP/2.0..Max-Fo
> >> rwards: 10..Record-Route:
> >> <sip:256 at 219.242.10.153;ftag=2441840520;lr=on>..V
> >> ia: SIP/2.0/UDP 219.242.10.153;branch=z9hG4bK41f3.9e2c3976.0..Via:
> >> SIP/2.0/
> >> UDP 226.145.234.113:5060;rport=5060..From:
> >> sip:test at voip2.test.net;tag=24418
> >> 40520..To: <sip:256 at voip2.test.net;user=phone>..Call-ID:
> >> 2303820380 at 226.145.
> >> 234.113..CSeq: 2 INVITE..Contact:
> >> <sip:test at 226.145.234.113:5060;transport=
> >> udp>..User-Agent: Cisco ATA 186 v2.16.2 ata18x
> >> (030909a)..Authorization: D
> >> igest
> >>
> username="test",realm="voip2.test.net",nonce="3f7de542de99d4e832372e6b
> >>
> >>
> >812a73562d346e6f",uri="sip:256 at voip2.test.net",response="1a4552ce6c6533
> 3
> >> 439b
> >> 6a97672f415a5"..Expires: 300..Content-Length: 271..Content-Type:
> >> applicatio
> >> n/sdp..Remote-Party-ID:
> >> 222;party=calling;id-type=subscriber;screen=no....v
> >> =0..o=test 5648 5648 IN IP4 226.145.234.113..s=ATA186 Call..c=IN
> IP4
> >> 226.14
> >> 5.234.113..t=0 0..m=audio 16384 RTP/AVP 0 4 8 101..a=rtpmap:0
> >> PCMU/8000/1..
> >> a=rtpmap:4 G723/8000/1..a=rtpmap:8 PCMA/8000/1..a=rtpmap:101
> >> telephone-even
> >> t/8000..a=fmtp:101 0-15..a=direction:active..
> >> #
> >> U 226.145.234.80:5060 -> 219.242.10.153:5060
> >> SIP/2.0 100 Trying..Via: SIP/2.0/UDP
> >> 219.242.10.153;branch=z9hG4bK41f3.9e2c
> >> 3976.0..Via: SIP/2.0/UDP 226.145.234.113:5060;rport=5060..From:
> >> sip:test at vo
> >> ip2.test.net;tag=2441840520..To:
> >> <sip:256 at voip2.test.net;user=phone>;tag=2077
> >> 559661..Call-ID: 2303820380 at 226.145.234.113..CSeq: 2
> INVITE..Server:
> >> Cisco
> >> ATA 186 v2.16.2 ata18x (030909a)..Content-Length: 0....
> >>
> >>
> >> Subject: Re: [Serusers] caller-id with raius using sip-rpid
> >>
> >> Is there any Remote-Party-ID header field in outgoing INVITE ? If so
> >> then your gateway/whatever ignores it.
> >>
> >> Jan.
> >>
> >> On 02-10 15:18, Steve Dolloff wrote:
> >> > Any phone that supports caller-id. But I haven't gotten to work.
> >I'm
> >> > seeing the username instead.
> >> >
> >> >
> >> > Subject: RE: [Serusers] caller-id with raius using sip-rpid
> >> >
> >> > Which phone device should I use to see caller ID
> >> > information when using the ATA186?
> >> >
> >> > Alejandro
> >> >
> >> > --- Steve Dolloff <sdolloff at noc.test.net> escreveu: >
> >> > At the top of the config I have the following
> >> > > statement....
> >> > >
> >> > > if (method=="INVITE") {
> >> > > record_route();
> >> > > if (!radius_www_authorize("")) {
> >> > > log(1,"radius auth
> >> > > failure");
> >> > >
> >> > > www_challenge("voip2.test.net","0");
> >> > > break;
> >> > > };
> >> > > append_rpid_hf();
> >> > > };
> >> > >
> >> > > If I call a phone with caller-id and my username is
> >> > > 256, it shows 256 on
> >> > > the phone, if I call with a username of test, it
> >> > > shows 4534 on the
> >> > > handset even though I have the sip-rpid set to 222.
> >> > >
> >> > > Stephen
> >> > >
> >> > >
> >> > > Subject: Re: [Serusers] caller-id with raius using
> >> > > sip-rpid
> >> > >
> >> > > Retrieving caller-id when users register doesn't
> >> > > work because REGISTER
> >> > > messages are processed by the server and the server
> >> > > generates a reply
> >> > > only.
> >> > >
> >> > > What you need is to insert Remote-Party-ID header
> >> > > field into INVITE
> >> > > message, to make it work you must authenticate also
> >> > > INVITE messages.
> >> > > My guess is that you do not authenticate INVITE
> >> > > messages and therefore
> >> > > there is nothing append_rpid_hf can add.
> >> > >
> >> > > Jan.
> >> > >
> >> > > On 02-10 11:35, Steve Dolloff wrote:
> >> > > > I want to retrieve the caller-id of a user from
> >> > > radius when they
> >> > > > register and use it when I redirect an invite
> >> > > request to the voicemail
> >> > > > system so that the voicemail system can route the
> >> > > call based on
> >> > > > caller-id. I also want to be able to send it to
> >> > > the sip gateway when
> >> > > I
> >> > > > am routing calls to the pstn.
> >> > > >
> >> > > > I have this in my config currently and it doesn't
> >> > > appear to set the
> >> > > > caller-id in the invite message.
> >> > > >
> >> > > >
> >> > > rewritehostport("219.242.10.153:5061");
> >> > > > append_rpid_hf();
> >> > > > t_relay();
> >> > > >
> >> > > >
> >> > > > Subject: Re: [Serusers] caller-id with raius using
> >> > > sip-rpid
> >> > > >
> >> > > > append_rpid_hf has no parameters. Version with 2
> >> > > parameters is in
> >> > > > unstable branch in the CVS only. What exactly do
> >> > > you want to do ?
> >> > > >
> >> > > > Jan.
> >> > > >
> >> > > > On 02-10 11:26, Steve Dolloff wrote:
> >> > > > > I found this example in a previous Serusers
> >> > > message.
> >> > > > >
> >> > > > > append_rpid_hf("<sip:+",
> >> > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> >"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes")
> ;
> >> > > > >
> >> > > > > I tried calling append_rpid_hf();, but it does
> >> > > nothing.
> >> > > > >
> >> > > > > I also tried
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> >append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes
> "
> >> > > > > ); but I get an unknown command presumably
> >> > > because I am not using
> >> > > the
> >> > > > > right number of parameters.
> >> > > > >
> >> > > > > I only want to modify the calling-id info.
> >> > > > >
> >> > > > > Can anyone provide an example?
> >> > > > >
> >> > > > > -----Original Message-----
> >> > > > > From: Jan Janak [mailto:jan at iptel.org]
> >> > > > > Sent: Thursday, October 02, 2003 11:09 AM
> >> > > > > To: Steve Dolloff
> >> > > > > Cc: serusers at lists.iptel.org
> >> > > > > Subject: Re: [Serusers] caller-id with raius
> >> > > using sip-rpid
> >> > > > >
> >> > > > > If you want to add Remote-Party-ID header field
> >> > > then you have to
> >> > > call
> >> > > > > append_rpid_hf function in your script.
> >> > > > >
> >> > > > > Jan.
> >> > > > >
> >> > > > > On 02-10 11:07, Steve Dolloff wrote:
> >> > > > > > OK, I am setting up a Voicemail system (using
> >> > > asterisk) and I am
> >> > > > > > currently doing a rewritehostport(ip:port) and
> >> > > then trelay() to
> >> > > send
> >> > > > > it
> >> > > > > > to the voicemail system if an invite fails.
> >> > > > > >
> >> > > > > > Should I change something? See my ser.cfg and
> >> > > output from the call
> >> > > > to
> >> > > > > > the vm.
> >> > > > > >
> >> > > > > > Here is the code from ser.cfg
> >> > > > > >
> >> > > > > >
> >> > > > > rewritehostport("219.242.10.153:5061");
> >> > > > > > t_relay();
> >> > > > > >
> >> > > > > > Here is the sip info from asterisk.
> >> > > > > >
> >> > > > > > INVITE sip:200 at 219.242.10.153:5061;user=phone
> >> > > SIP/2.0
> >> > > > > > Max-Forwards: 10
> >> > > > > > Record-Route:
> >> > > <sip:200 at 219.242.10.153;ftag=2236658534;lr=on>
> >> > > > > > Via: SIP/2.0/UDP
> >> > > 219.242.10.153;branch=z9hG4bK13de.31901234.0
> >> > > > > > Via: SIP/2.0/UDP
> >> > > 226.145.234.113:5060;rport=5060
> >> > > > > > From: sip:test at voip2.test.net;tag=2236658534
> >> > > > > > To: <sip:200 at voip2.test.net;user=phone>
> >> > > > > > Call-ID: 2218108971 at 226.145.234.113
> >> > > > > > CSeq: 1 INVITE
> >> > > > > > Contact:
> >> > > <sip:test at 226.145.234.113:5060;transport=udp>
> >> > > > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x
> >> > > (030909a)
> >> > > > > > Expires: 300
> >> > > > > > Content-Length: 271
> >> > > > > > Content-Type: application/sdp
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > > Subject: Re: [Serusers] caller-id with raius
> >> > > using sip-rpid
> >> > > > > >
> >> > > > > > Remote-Party-ID header field is inserted into
> >> > > forwarded requests,
> >> > > > not
> >> > > > > > responses.
> >> > > > > >
> >> > > > > > Jan.
> >> > > > > >
> >> > > > > > On 02-10 10:53, Steve Dolloff wrote:
> >> > > > > > > Ser doesn't appear to be passing the
> >> > > Caller-id to the ata at
> >> > > auth
> >> > > > or
> >> > > > > I
> >> > > > > > > am doing something wrong. Can anyone point
> >> > > me in the right
> >> > > > > direction?
> >> > > > > > >
> >> > > > > > > Thanks,
> >> > > > > > >
> >> > > > > > > Stephen
> >> > > > > > >
> >> > > > > > > I have the following entry in my freeradius
> >> > > users file.
> >> > > > > > >
> >> > > > > > > test at voip2.test.net Auth-Type := Digest,
> >> > > User-Password == "test"
> >> > > > > > > Reply-Message = "Hello, test with
> >> > > digest", Sip-Rpid =
> >> > > > > > > "8472222222"
> >> > > > > > >
> >> > > > > > > When I run a radclient test I get the
> >> > > correct info..
> >> > > > > > >
> >> > > > > > > radclient -f digest.test 219.242.10.153:1812
> >> > > auth testing
> >> > > > > > > Received response ID 134, code 2, length =
> >> > > 57
> >> > >
> >> > === message truncated ===
> >> >
> >> > Yahoo! Mail - o melhor webmail do Brasil
> >> > http://mail.yahoo.com.br
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
>
> --
> Jiri Kuthan http://iptel.org/~jiri/
>
More information about the sr-users
mailing list