[Serusers] Implementing Voicemail

[Steve Dolloff]

>>  I did place this portion inside the myself check
>>and it still tries to transfer to vm after the time expires.  

>I'm puzzled -- did not you want to transfer to vm after the time
expires?

I will try to make this clearer.  I am behind an ATA with a SIP proxy of
209.242.10.153.  If I call someone else registered on my domain and they
are not available, I want to go to voice mail.  If I call 1-800-555-1212
from my phone, I do not want my sip proxy to reroute the call to
voicemail after 10 seconds if no one answers(or ever for that matter).
Right now if I dial 18005551212 from my handset, I see the destination
as sip:18005551212 at 209.242.10.153 on the server which matches to myself
and ser tries to send it to voicemail.  

Someone calling into the network is not a problem.  They will never hit
our server unless the destination is local.

>>This is the part that I really need help with!  When the call timer
>>fails, the call goes to the route[1].  How do I get it into voice mail
>>from that point?

>See bellow, I think that should work.

This is what I had originally, and I get the following syslog.


Sep 10 16:36:36 voip2 ser: parse error (127,37-38): Command cannot be
used in the block
Sep 10 16:36:36 voip2 ser: ERROR: bad config file (1 errors)
Sep 10 16:36:36 voip2 ser: ser startup failed

Is says that vm is not valid in the block.  According the admin guide,
only certain commands can be used within a failure block.  I assume that
is the problem here.  If not, please let me know as this is exactly what
I want to do.

>THE SAME STUFF LIKE ABOVE, YOU DON'T WANT TO t_relay ANYTHING

>if(!vm("/tmp/am_fifo","voicemail")){
>                                               t_reply("500", "SEMS
>error");
>                                        };
>                                break;