[Serusers] Ser and Radius (again....)

[Lambros Lambrinos]

Hi,
Just for other people's reference, to get
ser to compile with radiusclient 0.4.x you need
to get the latest source from CVS.

Now as per the 'radius_howto' testing between
freeradius and the client worked fine.

However, after modifying ser.cfg, the following
comes up and i would appreciate any help.

0(0) ERROR: acc: error reading radius dictionary
0(0) init_mod(): Error while initializing module acc
ERROR: error while initializing modules

If i do not load module 'acc' then a similar error message
appears with 'auth_radius' not initialising.

I have appended dictionary.ser to dictionary and included
it from raddb. The permissions for dictionary are set to
rw/r/r and the relevant parts in ser.cfg are:

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf
")
modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiuscli
ent.conf")
modparam("auth_radius", "service_type", 15)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

#modparam ("acc", "log_level", 1)
#modparam ("acc", "radius_flag", 1)