[Serusers] RTP Proxy Help - One way Audio
Maxim Sobolev
sobomax at portaone.com
Tue Feb 17 20:41:51 CET 2004
As I said in my previoud message, most likely that isflagset(6) test in
onreply_route is causing problems. Remove it completely and try again.
-Maxim
Darren Nay wrote:
> Hey Guys,
>
> I am having issues with One way Audio for outgoing phone calls from my
> SIP phones. It works fine for Incoming, but outgoing audio is not
> working. Also, Outgoing works fine if I put my SIP phone on an Internet
> IP address, but if it's NAT'd then I get the 1 way audio on outgoing calls.
>
> I am using the default nathelper module config, but I have hacked it a
> bit and maybe my changes are causing the problem? I had to use
> t_relay_to_tcp for our PSTN gateway and so I had to change the routing
> around a little.
>
> Prior to today I was using SerMediaProxy (AG Projects), but I switched
> to PortaOnes rtpproxy just to make sure that there wasn't a version
> incompatibility problem.
>
> I have also attached my current ser.cfg file.
>
> Anyone have any suggestions? Or should I change the routing in my
> ser.cfg file? or would that make a difference?
>
> Any help would be greatly appreciated. Thanks!
>
> Darren Nay - dnay at libertyisp.com <mailto:dnay at libertyisp.com>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list