[Serusers] eliminating 483 errors
Ticknor.Scott at ic.gc.ca
Ticknor.Scott at ic.gc.ca
Wed Feb 18 17:35:19 CET 2004
> -----Original Message-----
> From: Klaus Darilion [mailto:klaus.mailinglists at pernau.at]
> Sent: Wednesday, February 18, 2004 10:09 am
> To: Ticknor, Scott: DGSE
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] eliminating 483 errors
>
>
> I think the alias must be in one line, or only the last line
> will be used!
>
> from your dump: the proxy forwards the invite to the second phone -
> which does not answer. There is no 483 in your dump.
>
> klaus
i don't understand it. serctl moni shows 483 whenever i use the Cisco [sip
fw v6.1] phones.
i changed the display name on the phones to match the phone number, just in
case that was problematic.
the call as shown in the dump [that is only part of the dump, the full file
is 48 pages in word :/] results in:
a) phone A calls phone B normally
b) phone A is hung up, phone B sees the hangup and disengages [i can see the
screen on phone B change as if call was cancelled]
c) phone B immediately starts ringing again, thinking it is receiving the
same call again.
d) serctl moni notes 483 errors, and the 'Failure' count goes up as well.
X-Lite, MSN, and Kphone clients seem to work ok.
a tail of /var/log/messages shows the same message repeating [a summary from
memory]:
sl_reply won't send reply for Ack
check out the ser.cfg, this is the one in use right now. it is nearly stock,
just a couple edits that shouldn't make much difference!?
st
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ser.cfg.txt
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040218/edc1e59a/attachment.txt>
More information about the sr-users
mailing list