[Serusers] ser/radius accounting not happening
Jan Janak
jan at iptel.org
Tue Jan 20 16:48:18 CET 2004
Could you post some examples of start and stop records with the same
time ?
Jan.
On 17-01 08:35, Madan wrote:
> Hi List,
> I 'am facing a problem with ser/radius configuration which is working fine except for the accounting part. In freeradius accounting details I see that both start and stop time is same, can somebody help me on how to fix this.
>
> here is my ser.cfg
>
> #
> # ----------- global configuration parameters ------------------------
> debug=9 # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
> listen=10.0.0.1
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/uri.so"
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> loadmodule "/usr/local/lib/ser/modules/group_radius.so"
>
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode", 2)
> modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> #modparam("auth_radius", "service_type", 15)
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> modparam("acc", "log_level", 1)
> modparam("acc", "radius_flag", 1)
>
> # ------------------------- request routing logic -------------------
> # main routing logic
>
> route{
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if (len_gt( max_len )) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
>
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> # t_relay();
> # break;
> # };
>
> if (loose_route()) {
>
> if (method=="BYE" || method=="CANCEL") {
> log (1, "BYE or CANCEL\n");
> setflag(1);
> };
>
>
> t_relay();
> break;
> };
>
>
>
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
>
> if (method=="REGISTER") {
>
> log(1, "REGISTER: Authenticating user\n");
>
> if (!radius_www_authorize("")) {
> log(1, "REGISTER: challenging user\n");
> www_challenge("", "0");
> break;
> };
> save("location");
> break;
> };
>
> ##########################################################################################################
> if (uri=~"^sip:44[127][0-9]+ at .*$")
> {
>
> if (rewritehostport("10.0.0.8:5060"))
> {
> if (!t_relay())
> {
> sl_reply_error();
> };
>
> }
> else
> {
> sl_reply_error ();
> };
> break;
>
> }
> else if (method=="INVITE")
> {
> sl_send_reply("403", "Call cannot be served here");
>
> };
>
>
> # account completed transactions via syslog
> setflag(1);
>
>
> ###############################################################################################################
> if (method=="INVITE") {
>
> log(1, "INVITE\n");
> setflag(1); /* set for accounting (the same value as in
> log_flag!) */
> };
>
> if (method=="MESSAGE") {
> log(1, "MESSAGE\n");
> setflag(1); /* set for accounting (the same value as in
> log_flag!) */
> };
>
> if (method=="BYE" || method=="CANCEL") {
> log (1, "BYE or CANCEL\n");
> setflag(1);
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> if (!t_relay()) {
> sl_reply_error();
> break;
> };
>
>
> }
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list