[Serusers] Fwd: 15 is a not a recognized RADIUS Packet

[Jesus Rodriguez]

On Wed, 16 Jun 2004, Adrian Georgescu wrote:

> As far as we dig into it, none of the following:
>
> freeradius
> radiusclient
> radius-cistron
> radius-livingston

Use Radiator (www.open.com.au/radiator). Is the best radius server out
there and supports Attribute 40 with Acct-Status-Type=15 :)

You get a great software, a really great support and pay just a little bit.


> > Implement 15 Failed
>
> Following RFCs should not lead us falling over the cliff.  Maybe 15
> should be traded with something else understood by the radius servers
> found in the real-world?
>
> Adrian
>
>
> Begin forwarded message:
>
> > From: Juha Heinanen <jh at tutpro.com>
> > Date: June 16, 2004 8:26:49 PM CEST
> > To: Adrian Georgescu <ag at ag-projects.com>
> > Cc: iancu at fokus.fraunhofer.de, serusers at lists.iptel.org
> > Subject: 15 is a not a recognized RADIUS Packet
> >
> > Adrian Georgescu writes:
> >
> >> Do you know by any chance what  does it mean?
> >
> > here are all official radius acct-status-types:
> >
> > Values for RADIUS Attribute 40, Acct-Status-Type [RFC 2866]:
> >
> > 	 1	Start		[RFC 2866]
> > 	 2	Stop		[RFC 2866]
> > 	 3	Interim-Update	[RFC 2866]
> >        4-6	(unassigned)
> > 	 7	Accounting-On	[RFC 2866]
> > 	 8	Accounting-Off	[RFC 2866]
> > 	 9	Tunnel-Start	[RFC 2867]
> > 	10	Tunnel-Stop	[RFC 2867]
> > 	11	Tunnel-Reject	[RFC 2867]
> > 	12	Tunnel-Link-Start	[RFC 2867]
> > 	13	Tunnel-Link-Stop	[RFC 2867]
> > 	14	Tunnel-Link-Reject	[RFC 2867]
> > 	15	Failed			[RFC 2866]
> >
> > you can find definition of 15 from the above mentioned rfc, but if a
> > fails before starting, then 15 is the right way to report it.
> >
> > -- juha
>


Saludos
JesusR.

-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr at voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------