[Serusers] SER & freeradius !

[Anton]

Hello Daniel-Constantin Mierla & List

I've followed your advice, and still not see any reply from ser when monitor
net traffic by ethereal .

Please, help me configure SER.
Thank you very much & best regard
Anton

PS:  Here is my ser.cfg:
==================
debug=3
fork=yes
log_stderror=yes

check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
alias="fptnet.vn"
alias="hnluat.edu"
alias="sgluat.edu"
alias="sg.fptnet.com"
alias="fptnet.com"

#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
#loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
#loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
#loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/xlog.so"

modparam("usrloc", "db_mode",   0)
#modparam("uri_radius", "service_type", 11)
modparam("rr", "enable_full_lr", 1)
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("acc", "radius_config",
"/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("xlog", "buf_size", 8192)


###
#modparam("acc", "log_level", 1)
#modparam("acc", "log_flag", 1)
#modparam("acc", "radius_flag", 1)
modparam("tm", "fr_inv_timer", 15 )
modparam("tm", "fr_timer", 10 )
modparam("auth", "secret", "testing123")
modparam("auth_radius", "service_type", 15)
###


route{

 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  break;
 };
# if ( msg:len > max_len ) {
#  sl_send_reply("513", "Message too big");
#  break;
# };

 record_route();
 if (loose_route()) {
  t_relay();
  break;
 };

 if (uri==myself) {
  xlog("L_ERR", " method <%rm> <%fu> <%tu>\n");
  if (method=="REGISTER") {
   # if (!www_authorize("mydomain", "subscriber")) {
   if (!radius_www_authorize("fptnet.vn")) {
    www_challenge("fptnet.vn", "0");
    break;
   };

   save("location");
   break;
  };

  setflag(1);
  if (method=="INVITE") record_route();

  if (method=="REGISTER") {
         log(1, "REGISTER received\n");
         } else {
                 log(1, "non-REGISTER received\n");
         };
         if (uri=~"sip:.*[@:]fptnet.vn") {
                 log(1, "request for fptnet.vn\n");
         } else {
                 log(1, "request for other domain received\n");
         };

  if (!lookup("location")) {
   sl_send_reply("404", "Not Found");
   break;
  };
 #};
  if (!t_relay()) {
   sl_reply_error();
  };

 };
}



=============================

----- Original Message ----- 
From: "Daniel-Constantin Mierla" <daniel at iptel.org>
To: "Anton" <antontran at fptnet.com.vn>
Cc: <serusers at lists.iptel.org>
Sent: Friday, March 12, 2004 5:07 PM
Subject: Re: [Serusers] SER & freeradius !


> Hello,
> it might be possible that the condition uri=~"fptnet.vn" does not match.
> It is better to use uri==myself and put alias="fptnet.vn" and other
> hostnames you may have just below the line fifo="/tmp/ser_fifo".
>
> If still doesnt work, watch the network (using ngrep or ethereal) and
> see how the SIP messages are routed. Also you can set log_stderror=yes,
> start ser from a console and you will be able to see lot of debug
messages.
>
> .Daniel
>
> On 3/12/2004 4:22 AM, Anton wrote:
>
> > Hello List,
> >
> > Please help me!
> > I've installed Ser & followed the RADIUS Howto in ser website.
> > Every thing seems to run, but radius is idle all the time, SIPPS
> > cannot registre with SER.
> >
> > Here is my ser.cfg file
> >
> > What I'm wrong ?
> > Any info is appreciated,
> > Best regards,
> > Anton
> >
> > =============================ser.cfg file ===============
> >
> > debug=7
> > fork=yes
> > log_stderror=no
> >
> > check_via=no # (cmd. line: -v)
> > dns=no           # (cmd. line: -r)
> > rev_dns=no      # (cmd. line: -R)
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> >
> > #loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > #loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
> > #loadmodule "/usr/local/lib/ser/modules/uri.so"
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> > #loadmodule "/usr/local/lib/ser/modules/acc.so"
> > loadmodule "/usr/local/lib/ser/modules/xlog.so"
> >
> > modparam("usrloc", "db_mode",   0)
> > #modparam("uri_radius", "service_type", 11)
> > modparam("rr", "enable_full_lr", 1)
> > modparam("auth_radius", "radius_config",
> > "/usr/local/etc/radiusclient/radiusclient.conf")
> > #modparam("acc", "radius_config",
> > "/usr/local/etc/radiusclient/radiusclient.conf")
> > #modparam("xlog", "buf_size", 8192)
> >
> >
> > ###
> > #modparam("acc", "log_level", 1)
> > #modparam("acc", "log_flag", 1)
> > #modparam("acc", "radius_flag", 1)
> > modparam("tm", "fr_inv_timer", 15 )
> > modparam("tm", "fr_timer", 10 )
> > modparam("auth", "secret", "testing123")
> > modparam("auth_radius", "service_type", 15)
> > ###
> >
> >
> > route{
> >
> >     if (!mf_process_maxfwd_header("10")) {
> >           sl_send_reply("483","Too Many Hops");
> >           break;
> >      };
> > # if ( msg:len > max_len ) {
> > #  sl_send_reply("513", "Message too big");
> > #  break;
> > # };
> >
> >      record_route();
> >      if (loose_route()) {
> >           t_relay();
> >           break;
> >      };
> >
> >      if (uri=~"fptnet.vn") {
> >           xlog("L_ERR", " method <%rm> <%fu> <%tu>\n");
> >           if (method=="REGISTER") {
> >    # if (!www_authorize("mydomain", "subscriber")) {
> >                if (!radius_www_authorize("fptnet.com.vn")) {
> >                     www_challenge("fptnet.com.vn", "0");
> >                     break;
> >                };
> >
> >                save("location");
> >                break;
> >           };
> >
> >           setflag(1);
> >           if (method=="INVITE") record_route();
> >
> >           if (method=="REGISTER") {
> >              log(1, "REGISTER received\n");
> >              } else {
> >                  log(1, "non-REGISTER received\n");
> >              };
> >          if (uri=~"sip:.*[@:]fptnet.vn") {
> >                  log(1, "request for fptnet.vn\n");
> >          } else {
> >                  log(1, "request for other domain received\n");
> >          };
> >
> >   if (!lookup("location")) {
> >    sl_send_reply("404", "Not Found");
> >    break;
> >   };
> >  #};
> >   if (!t_relay()) {
> >    sl_reply_error();
> >   };
> >
> >  };
> > }
> >
> >
> >
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
> >