[Serusers] Quick start SER Too much shared memory

[Martin Coggin]

Tried that, ie put the "" around the 192.168.0.100 and get the same
response ie Error: bad config file (2 errors).

The report doesn't specify what the errors are Im afraid.

Re naming of server.  I don't use DNS on my network just ip addresses.
Im providing access to the server to the outside world by using port
forwarding. So Im assuming that I can use the ip address instead of the
name in the config file.  Is this acceptable to SER??

Best regards Martin Coggin
 
Information in this message is confidential and may be legally
privileged.  It is intended solely for the person to whom it is
addressed.  If you have received this email in error please delete it
immediately and also reply to me to let me know.  Thank you for your
help.
 

-----Original Message-----
From: Atle Samuelsen [mailto:clona at cyberhouse.no] 
Sent: 29 March 2004 09:12
To: Martin Coggin
Subject: Re: [Serusers] Quick start SER Too much shared memory

Hey Martin

* Martin Coggin <martin at mc2-consulting.co.uk> [040329 10:04]:
> Tks.  Got through to point 6 of the section on adding my sql ser.
> 
> I edited the ser.cfg file see the attached file.  However I got 2
errors
> reported as per extract below and sorry I cant find them in the file.
> 
> hattie:/etc/init.d# ser restart
> ERROR: bad config file (2 errors)
> hattie:/etc/init.d#


> 
> Note that I don't have DNS server on my network so Im using my
internal
# Uncomment this if you want to use digest authentication
                        if (!www_authorize(192.168.0.100, "subscriber"))
{
                                www_challenge(192.168.0.100, "0");
                                break;
                        };


Im guessing without seeing the erros that you are hitting are that you
are missing some " in the block I pasted erly'er.. 
try to change it to !www_authorize("192.168.0.100",
and www_channenge("192.168.0.100", ..
tho. remeber that your domain must now be 192.168.0.100...



> ip address, I assume that hence the entry for the ip address is
> acceptable.  My hosts file does include the host name.  Is this ok.
Ill
> be doing a forward on my firewall from my ip address to my internal ip
> address of the server.
> 
> Im a little concerned that I didn't do step 3 completely.  Ie creation
> of MySQL tables.  I used the /usr/sbin/ser_mysql.sh creation process.
I
> entered a blank password for root, I entered ser as the domain: I got
a
> creating database ... message, then got another "Enter password:"
> request, entered blank and then returned to the command line.
> 
> 
> 
> You've been very patient with your help tks Martin
>  
> 

- Atle
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers