[Serusers] SER and NAT
LeeCC, Kenny
kenny.leecc at hp.com
Tue May 18 12:31:07 CEST 2004
You are welcome and no problem. :-) Thanks should goes to Klaus for his
sample config. I have tried out the config with iptables and it works
fine. Though I do have problem of Cisco IP phones unable to re-register
again upon expiration. Haven't got time to investigate fully. Will look
at the packets again once I have time.
rgds,
kenny.leecc
> -----Original Message-----
> From: XeloQ Communications [mailto:tjapko at xeloq.com]
> Sent: Tuesday, May 18, 2004 18:02
> To: LeeCC, Kenny; serusers at lists.iptel.org
> Subject: RE: [Serusers] SER and NAT
>
>
> Thanks. sorry for posting my question. This will help. Tjapko.
>
> -----Original Message-----
> From: LeeCC, Kenny [mailto:kenny.leecc at hp.com]
> Sent: Lunes, 17 de Mayo de 2004 10:59 p.m.
> To: tjapko at xeloq.com; serusers at lists.iptel.org
> Subject: RE: [Serusers] SER and NAT
>
>
> Please use Google and search mail.iptel.org site for help.
> The mailing list archive have tonnes of goodies and tips. If
> you can't find any help there, only then post your questions.
>
> Klaus Darilion posted a sample for nathelper and voicemail
> ser.cfg on the mailing list before hopefully this helps.
> http://lists.iptel.org/pipermail/serusers/2004-February/005996.html
>
> > -----Original Message-----
> > From: serusers-bounces at lists.iptel.org
> > [mailto:serusers-bounces at lists.iptel.org] On Behalf Of Tjapko ITS
> > Consult at ncy
> > Sent: Tuesday, May 18, 2004 08:44
> > To: serusers at lists.iptel.org
> > Subject: [Serusers] SER and NAT
> >
> >
> > Hello list,
> >
> > Can somebody please tell me where I can find the information
> > to properly configure SER with NAT using the nathelper or
> > whatever module.
> >
> > The manual does not have examples and the SER Wiki
> > information is very superficial.
> >
> > I was looking into the users list and found configs like these;
> >
> > # -- nathelper params --
> > modparam("nathelper", "natping_interval", 60)
> > modparam("nathelper", "ping_nated_only", 1) # special NAT
> > flag indicates that a registered client is behind NAT
> > modparam("registrar", "nat_flag", 6)
> >
> > My question is where this information is documented or even
> > better are there any complete examples available.
> >
> > I know it is there I just don't know where to find it.
> >
> > Kindest Regards,
> >
> > Tjapko Smits
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.687 / Virus Database: 448 - Release Date: 16/05/2004
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> >
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.687 / Virus Database: 448 - Release Date: 16/05/2004
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.687 / Virus Database: 448 - Release Date: 16/05/2004
>
>
More information about the sr-users
mailing list