[Serusers] re: i have a problem and i'm so desperate i'm offeringmoney to anyone who can solve it
Michael Shuler
mike at bwsys.net
Sat Sep 25 23:41:24 CEST 2004
Get an ngrep trace of what works and what doesn't
----------------------------------------
Michael Shuler, C.E.O.
BitWise Communications, Inc. (CLEC) And BitWise Systems, Inc. (ISP)
682 High Point Lane
East Peoria, IL 61611
Office: (217) 585-0357
Cell: (309) 657-6365
Fax: (309) 213-3500
E-Mail: mike at bwsys.net
Customer Service: (877) 976-0711
> -----Original Message-----
> From: serusers-bounces at lists.iptel.org
> [mailto:serusers-bounces at lists.iptel.org] On Behalf Of Yair Hakak
> Sent: Saturday, September 25, 2004 2:08 PM
> To: serusers at lists.iptel.org
> Subject: [Serusers] re: i have a problem and i'm so desperate
> i'm offeringmoney to anyone who can solve it
>
>
> Hello all,
> I have a continuing problem with registering a grandstream
> BT102 to SER.
> It is behind a router but i am pretty sure NAT is not a problem
> because i got the phone to register to asterisk perfectly.
> The problem is this:
> 1. i cannot modify the SRV records on my server - it is set up with a
> DNS A record for "phone.myserver.com"
> 2. i can register x-lite to the server fine, by putting the IP address
> in the SIP proxy and outbound proxy fields, and using
> "phone.myserver.com" as the Domain/Realm.
>
> SER checks users against phone.myserver.com (digest authentication)
> and the grandstream doesn't register (which makes sense, because on
> the grandstream you can't set the domain/realm and the proxy server
> separately) however:
> according to the grandstream website:
>
> What if my SIP URI domain is different from the SIP proxy server FQDN
> (Fully Qualified Domain Name)?
>
> With firmware 1.0.3.60 and later, you can put the your SIP URI domain
> name into the SIP Server field, and put the actual sip server FQDN
> into Outbound Proxy field. The phone will use the domain name in SIP
> Server as part of SIP URI but send and receive SIP messages through
> the SIP proxy server defined in the Outbound Proxy field.
>
> -but that doesn't work, i still get 401 errors
>
> i am so desperate that i will give the first person who gives me
> information to solve this problem $20 of amazon credit (you can use it
> to get one of those spiffy new linksys PAP2 devices) as a token of
> appreciation.
>
> thanks,
> yair
>
> p.s. don't tell me to enable SRV. I know this would probably solve the
> problem, but it's not an option. if x-lite can register without SRV
> records i'm pretty sure the grandstream can as well, i just don't know
> how.
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
More information about the sr-users
mailing list