[Serusers] SIP + RTPPROXY + NEED HELP

[harry gaillac]

Greger,

I agree you for acc module and nat you help me.
I read documentation on www.onsip.org for Nat.
Tell me what's wrong in my ser.cfg
I compiled rttproxy, ser, write ser.cfg for nat from
onsip.org.

Harry

 --- "Greger V. Teigre" <greger at teigre.com> a écrit : 
> Dear Iantcho,
> A group of SER users are trying to establish a
> baseline of understanding, as 
> well as create a set of well-proven configuration
> files with explanation. We 
> do this through a document called SER - Getting
> Started, which can be found 
> at http://onsip.org/. The document is under
> development, but we address NAT, 
> both from a conceptual and practical point of view.
>     If people base their configs on those templates,
> it will be a lot easier 
> to help people, because the starting point (both in
> knowledge and 
> configuration file structure/content) will be known.
> g-)
> 
> PS!
>     Don't worry about Harry's comment below, I'm not
> sure if he at all 
> bothered to register to get the Getting Started
> document.  I have also 
> posted responses to his requests for help five
> times. However, he did not 
> start out with the ONsip.org Getting Started
> configuration file and insisted 
> on getting help without even trying to copy the
> recommended configuration 
> for nathelper/rtpproxy into his own.
> 
> 
> harry gaillac wrote:
> > Hello,
> >
> > I have the same troubles with ser+rtpproxy.
> > I think of you'll  waste time because of
> rtpproxy+ser
> > documention is bad.
> > I looked at www.onsip.org in order to find help
> about
> > NAT without success but you can waste time to send
> > help to serusers mailing list.
> >
> > We can read some nat troubles in mailing list
> every
> > week.
> >
> > I do hope you'll find help.
> >
> > Regards
> > Harry
> >
> > --- Iantcho Vassilev <ianchov at gbg.bg> a écrit :
> >> Hello, guys!
> >>
> >> Here is my situation:
> >>
> >> I have 2 ADSL at home:
> >>
> >> I have set up a linux(debian) SER +RTPPROXY on of
> >> the ADSL
> >> and i use the other Adsl for internet
> >> here:
> >> me ----> 192.168.0.xx(SER with two ethernet int)
> >>>
> >> 192.168.0.x(default gateway)
> >>>
> >> internet
> >>
> >> I`m using Xphone-Lite.
> >> I would like to contact another person registered
> on
> >> the outside interface of Ser(i`m registering from
> >> the interior).
> >> Internet IP <---> outside
> >> interface(SER)(lan)<---->me
> >> But that`s not working
> >> What`s should be the mistake(from sipsak i got:
> >> from the internet user: sipsak -s
> >> sip:adress_registered_from_lan at myADLShere
> >> returns my other ADSL line.
> >> and from sipsak -s
> >> sip:internet_number_user at myADSLhere i got
> >> sip:internet_number_user at HIS_IP_ADDRESS
> >>
> >>
> >> rttproxy is isntalled(build from cvs this
> morning)
> >>
> >> SER.cfg is
> >>
> >
>
:------------------->>>>>>>>><<<<<<<<<<<--------------------
> >>
> >> # ----------- global configuration parameters
> >> ------------------------
> >>
> >> debug=3         # debug level (cmd line:
> >> -dddddddddd)
> >> fork=yes
> >> log_stderror=no # (cmd line: -E)
> >>
> >> #/* Uncomment these lines to enter debugging mode
> >> #debug=7
> >> #Fork=no
> >> #log_stderror=yes
> >> #*/
> >>
> >> check_via=no    # (cmd. line: -v)
> >> dns=no           # (cmd. line: -r)
> >> rev_dns=no      # (cmd. line: -R)
> >> port=5060
> >> #Listen=83.228.8.112
> >> children=2
> >> fifo="/tmp/ser_fifo"
> >>
> >> # ------------------ module loading
> >> ----------------------------------
> >>
> >> # Uncomment this if you want to use SQL database
> >> #loadmodule "/usr/lib/ser/modules/mysql.so"
> >> loadmodule "/usr/lib/ser/modules/textops.so"
> >> loadmodule "/usr/lib/ser/modules/sl.so"
> >> loadmodule "/usr/lib/ser/modules/tm.so"
> >> loadmodule "/usr/lib/ser/modules/rr.so"
> >> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> >> loadmodule "/usr/lib/ser/modules/usrloc.so"
> >> loadmodule "/usr/lib/ser/modules/registrar.so"
> >> loadmodule "/usr/lib/ser/modules/nathelper.so"
> >>
> >> #loadmodule "/usr/lib/ser/modules/domain.so"
> >> #loadmodule "/usr/lib/ser/modules/mediaproxy.so"
> >> # Uncomment this if you want digest
> authentication
> >> # mysql.so must be loaded !
> >> #loadmodule "/usr/lib/ser/modules/auth.so"
> >> #loadmodule "/usr/lib/ser/modules/auth_db.so"
> >>
> >> # ----------------- setting module-specific
> >> parameters ---------------
> >>
> >> # -- usrloc params --
> >>
> >> modparam("usrloc", "db_mode",   0)
> >> modparam("registrar", "nat_flag", 6)
> >> modparam("nathelper", "natping_interval", 60)
> >> modparam("nathelper", "ping_nated_only", 1)
> >> # Uncomment this if you want to use SQL database
> >> # for persistent storage and comment the previous
> >> line
> >> #modparam("usrloc", "db_mode", 2)
> >>
> >> # -- auth params --
> >> # Uncomment if you are using auth module
> >> #
> >> #modparam("auth_db", "calculate_ha1", yes)
> >> #
> >> # If you set "calculate_ha1" parameter to yes
> (which
> >> true in this config),
> >> # uncomment also the following parameter)
> >> #
> >> #modparam("auth_db", "password_column",
> "password")
> >>
> >> # -- rr params --
> >> # add value to ;lr param to make some broken UAs
> >> happy
> >> modparam("rr", "enable_full_lr", 1)
> >>
> >> # -------------------------  request routing
> logic
> >> -------------------
> >>
> >> # main routing logic
> >> route{
> >>
> >>         # initial sanity checks -- messages with
> >>         # max_forwards==0, or excessively long
> >> requests
> >>         if (!mf_process_maxfwd_header("10")) {
> >>                 sl_send_reply("483","Too Many
> >> Hops");
> >>                 break;
> >>         };
> >>         if (msg:len >=  max_len ) {
> >>                 sl_send_reply("513", "Message too
> >> big");
> >>                 break;
> >>         };
> >>
> >>         # !! Nathelper
> >>         # Special handling for NATed clients;
> first,
> >> NAT test is
> >>         # executed: it looks for via!=received
> and
> >> RFC1918 addresses
> >>         # in Contact (may fail if line-folding is
> >> used); also,
> >>         # the received test should, if completed,
> 
=== message truncated === 


	

	
		
__________________________________________________________________
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! 
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/