[Serusers] NAT and ser
Greger V. Teigre
greger at teigre.com
Tue Apr 19 08:47:31 CEST 2005
Serhan,
You have left out many different commands that are needed for NATing (hint:
fix_nated_contact()). Have a look at the Getting Started document at
http://onsip.org/ and the example config files.
g-)
----- Original Message -----
From: "Serhan Sevim" <sevims at mezun.com>
To: <serusers at lists.iptel.org>
Sent: Monday, April 18, 2005 10:44 PM
Subject: [Serusers] NAT and ser
> Hello there,
> we use ser to forward incoming call requests to a remote PSTN.
> this system works fine if the client has a non-natted public IP
> address.However, I can't tell the same thing for the natted clients and
> it doesn't work so far.
> using nathelper/rtpproxy, the client (x-lite) can make the connection
> and ring the phone but picking up the phone on the other end.. hmm,
> well, no audio can be heard.
> As a matter of fact, x-lite client times out with error 408 "after" I
> hear the remote phone rings. it seems like the client side simply
> signaling for connection but no data(audio) transfer can be made.
> below is my ser.cfg, does anybody have an idea?
> Thanks in advance.
> Serhan.
>
>
>
> # ----------- global configuration parameters ------------------------
>
> #debug=7 # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=yes # (cmd line: -E)
>
> # Uncomment these lines to enter debugging mode
> #debug=7
> #fork=yes
> #log_stderror=yes
>
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
>
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/nathelper.so"
> loadmodule "/usr/local/lib/ser/modules/textops.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/xlog.so"
>
> #Database URL is here!
> modparam("usrloc", "db_url", "sql://ser:pass123@localhost/ser")
>
> #nathelper params.
> modparam("registrar", "nat_flag", 6)
> modparam("nathelper", "natping_interval", 30) # Ping interval 30 seconds
> modparam("nathelper", "ping_nated_only", 1) # Ping only clients
> behind NAT
>
> #mysql
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> #modparam("usrloc", "db_mode", 0)
> modparam("usrloc", "db_mode", 2)
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "password_column", "password")
> modparam("rr", "enable_full_lr", 1)
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
> alias="domain.com"
> alias="sipgw.domain.com"
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
>
> # for testing purposes, simply okay all REGISTERs
> if (method=="REGISTER") {
> log(1, "REGISTER received\n");
> } else {
> log(1, "non-REGISTER received\n");
> };
> if (uri=~"sip:.*[@:]sipgw.domain.com") {
> log(1, "request for sipgw.domain.com received\n");
> } else {
> log(1, "request for other domain received\n");
> };
>
>
>
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entitie
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
>
> # PSTN Forwarding
> if (uri=~"^sip:1")
> {
> strip(1);
> # forward(pstngw.jondoe.com,5060);
> force_rtp_proxy();
> t_relay_to_udp("pstngw.jondoe.com", "5060");
> break;
> };
>
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "not exists!");
> break;
> };
>
>
> };
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> }
>
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
More information about the sr-users
mailing list