[Serusers] ACC into mysql
Edgardo O. Gonzales II
edgardo.g at pacific.net.ph
Tue Apr 26 03:21:57 CEST 2005
Hi Kofi!
got it.. thanks for immediate feedback .. however my accounting is not working.
any parameters to be added to make it work..
I have the following info already on my ser.cfg
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 3)
record_route(); -> its this a parameter for accounting
thanks,
ed
At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote:
>I think the correct modparam statement should read as follows:
>modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
>
>please note that "my" is required in front of sql
>
>and not:
>modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")
>
>-----Original Message-----
>From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org]On
>Behalf Of Edgardo O. Gonzales II
>Sent: Monday, April 25, 2005 5:20 PM
>To: serusers at lists.iptel.org
>Subject: Re: [Serusers] ACC into mysql
>
>
>Hi all!
>
>Im also receiving this error message.
>
>Can somebody help us on how to make accounting work using mysql.
>
>thanks,
>ed
>
>At 06:01 AM 4/26/2005, Leon Sun wrote:
>>Hi,
>>I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql
>>followed instruction from manual. I found, first, modparam("acc",
>>"db_url", "sql://ser:heslo@localhost/ser") coudnlt work at all in
>>ser.cfg. If I enabled in cfg file, it showed Starting ser: ERROR: bad
>>config file (1 errors)
>>
>>If I disabled it, SER worked fine but I couldnt see any record in acc table.
>>
>>Would anyone suggest how to put call records into Mysql?
>>
>>Thank you.
>>
>>
>>
>># ----------- global configuration parameters ------------------------
>>
>>#debug=3 # debug level (cmd line: -dddddddddd)
>>#fork=yes
>>#log_stderror=no # (cmd line: -E)
>>
>>/* Uncomment these lines to enter debugging mode
>>debug=7
>>fork=no
>>log_stderror=yes
>>*/
>>
>>check_via=no # (cmd. line: -v)
>>dns=no # (cmd. line: -r)
>>rev_dns=no # (cmd. line: -R)
>>#port=5060
>>#children=4
>>fifo="/tmp/ser_fifo"
>>
>># ------------------ module loading ----------------------------------
>>
>># Uncomment this if you want to use SQL database
>>loadmodule "/usr/lib/ser/modules/mysql.so"
>>
>>loadmodule "/usr/lib/ser/modules/acc.so"
>>loadmodule "/usr/lib/ser/modules/sl.so"
>>loadmodule "/usr/lib/ser/modules/tm.so"
>>loadmodule "/usr/lib/ser/modules/rr.so"
>>loadmodule "/usr/lib/ser/modules/maxfwd.so"
>>loadmodule "/usr/lib/ser/modules/usrloc.so"
>>loadmodule "/usr/lib/ser/modules/registrar.so"
>>
>># Uncomment this if you want digest authentication
>># mysql.so must be loaded !
>>loadmodule "/usr/lib/ser/modules/auth.so"
>>loadmodule "/usr/lib/ser/modules/auth_db.so"
>>
>># ----------------- setting module-specific parameters ---------------
>>
>>#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")
>>
>># -- usrloc params --
>>
>>#modparam("usrloc", "db_mode", 0)
>>
>># Uncomment this if you want to use SQL database
>># for persistent storage and comment the previous line
>>modparam("usrloc", "db_mode", 2)
>>
>># -- auth params --
>># Uncomment if you are using auth module
>>#
>>modparam("auth_db", "calculate_ha1", yes)
>>#
>># If you set "calculate_ha1" parameter to yes (which true in this config),
>># uncomment also the following parameter)
>>#
>>modparam("auth_db", "password_column", "password")
>>
>># -- rr params --
>># add value to ;lr param to make some broken UAs happy
>>modparam("rr", "enable_full_lr", 1)
>>
>>
>>modparam("acc","log_level",1)
>>modparam("acc","log_flag",1)
>># ------------------------- request routing logic -------------------
>>
>># main routing logic
>>
>>route{
>>
>> # initial sanity checks -- messages with
>> # max_forwards==0, or excessively long requests
>> if (!mf_process_maxfwd_header("10")) {
>> sl_send_reply("483","Too Many Hops");
>> break;
>> };
>> if ( msg:len > max_len ) {
>> sl_send_reply("513", "Message too big");
>> break;
>> };
>>
>> # we record-route all messages -- to make sure that
>> # subsequent messages will go through our proxy; that's
>> # particularly good if upstream and downstream entities
>> # use different transport protocol
>> record_route();
>> # loose-route processing
>> if (loose_route()) {
>> if (method=="BYE") {
>> setflag(1);
>> setflag(2);
>> }
>>
>> t_relay();
>>
>> break;
>> };
>>
>> #labeled all transaction for accounting
>> setflag(1);
>> setflag(2);
>>
>> if (method=="CANCEL"){
>> t_relay();
>> };
>>
>> # (in case, it does not work, use the following command
>> # with proper names and addresses in it)
>>
>>
>> if (uri==myself) {
>>
>> # This for PSTN destination
>>
>> if (uri=~"^sip:1")
>>
>> { rewritehost("10.10.10.10");
>> forward(10.10.10.10,5060);
>> break;
>> }
>> if (method=="REGISTER") {
>>
>> # Uncomment this if you want to use digest authentication
>> if (!www_authorize("sip.mycommunications.com",
>> "subscriber")) {
>>
>>www_challenge("sip.mycommunications.com", "0");
>> break;
>> };
>>
>> save("location");
>> break;
>> };
>>
>> # native SIP destinations are handled using our USRLOC DB
>> if (!lookup("location")) {
>> sl_send_reply("404", "Not Found");
>> break;
>> };
>> };
>> # forward to current uri now; use stateful forwarding; that
>> # works reliably even if we forward from TCP to UDP
>> if (!t_relay()) {
>> sl_reply_error();
>> };
>>
>>}
>>_______________________________________________
>>Serusers mailing list
>>serusers at lists.iptel.org
>>http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050426/11bb4eaf/attachment.htm>
More information about the sr-users
mailing list