[Serusers] ACC into mysql
Edgardo O. Gonzales II
edgardo.g at pacific.net.ph
Sat Apr 30 11:36:10 CEST 2005
thank you so much .. I finally made it work after I rebuild everything just
to make sure my installation and compilation
is clean ..
With regards to call routing, can you give me an example where we can
communicate with other gatekeeper
thanks,
ed
At 09:13 PM 4/26/2005, Matt Schulte wrote:
>This particular config (I don't think?) won't log to a DB, additionally
>you need to setflag(1); somewhere in your config. We tried to set on
>"outbound" only originally and didn't have much luck so I set it near the
>top. To log to (my)sql you will additionally need to set another flag and
>setup similar mod params:
>
>
>modparam("acc", "db_url", "mysql://ser:serro@blah.mysql.haha/dbname")
># Note flag 2, you will need to setflag(1); AND setflag(2);
>modparam("acc", "db_flag", 2)
>#Note this one logs all failed calls from the invite response, I find it
>useful
>modparam("acc", "failed_transactions", 1)
># In your route config use something like the following
>
># This is pretty much near the top, while ACC won't log reg's or INFO
>anyway, I just thought it'd be a little cleaner to have
>...
>if (!method == "REGISTER" || !method == "INFO" ) {
> setflag(1);
> setflag(2);
>}
>...
>
># Doing the above ensure everything gets tagged including BYE's. A good
>reason why your BYE's may not get
># tagged is possibly because record-route could be relaying the call
>before the flag gets set, just a thought..
>-----Original Message-----
>From: Edgardo O. Gonzales II [mailto:edgardo.g at pacific.net.ph]
>Sent: Tuesday, April 26, 2005 1:29 AM
>To: Kofi Obiri-Yeboah
>Cc: serusers at lists.iptel.org
>Subject: RE: [Serusers] ACC into mysql
>Importance: High
>
>
>Thanks again for your help .. Here's my running ser.cfg
>Hope you can help me make my accounting work..
>
>thanks,
>ed
>
>================================================================
># ----------- global configuration parameters ------------------------
>
>#debug=3
>#fork=yes
>#log_stderror=no
>
>#debug=7
>#fork=no
>#log_stderror=yes
>
>check_via=no
>dns=no
>rev_dns=no
>#port=5060
>#children=4
>fifo="/tmp/ser_fifo"
>
># ------------------ module loading ----------------------------------
>
>loadmodule "/usr/local/ser/lib/ser/modules/mysql.so"
>loadmodule "/usr/local/ser/lib/ser/modules/sl.so"
>loadmodule "/usr/local/ser/lib/ser/modules/tm.so"
>loadmodule "/usr/local/ser/lib/ser/modules/rr.so"
>loadmodule "/usr/local/ser/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/local/ser/lib/ser/modules/usrloc.so"
>loadmodule "/usr/local/ser/lib/ser/modules/registrar.so"
>loadmodule "/usr/local/ser/lib/ser/modules/auth.so"
>loadmodule "/usr/local/ser/lib/ser/modules/auth_db.so"
>loadmodule "/usr/local/ser/lib/ser/modules/acc.so"
>
># ----------------- setting module-specific parameters ---------------
>
># -- usrloc params --
>
>modparam("usrloc", "db_mode", 1)
>modparam("usrloc", "db_url","mysql://ser:heslo@localhost/ser")
>
># -- auth params --
>
>modparam("auth_db", "calculate_ha1", yes)
>modparam("auth_db", "password_column", "password")
>
># -- rr params --
>
>modparam("rr", "enable_full_lr", 1)
>
># -- acc params --
>
>modparam("acc", "log_level", 1)
>modparam("acc", "log_flag", 1)
>modparam("acc", "log_missed_flag", 3)
>
># ------------------------- request routing logic -------------------
>
>alias=abc.com.ph
>
># main routing logic
>
>route{
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> record_route();
> if (loose_route()) {
> t_relay();
> break;
> };
>
> if (uri=~"abc.com.ph") {
> if (method=="REGISTER") {
> if (!www_authorize("abc.com.ph", "subscriber")) {
> www_challenge("abc.com.ph", "0");
> break;
> };
>
> save("location");
> break;
> };
>
> lookup("aliases");
>
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> if (!t_relay()) {
> sl_reply_error();
> };
>
>}
>
>
>
>
>================================================================
>At 10:55 AM 4/26/2005, Kofi Obiri-Yeboah wrote:
>>I am assuming your question is if the record_route() function is a
>>parameter for accounting? If that was your question then the answer is
>>no. Generally you invoke record_route() to ensure acl acceptance on a
>>gateway (i.e. all calls through that gateway)
>>-----Original Message-----
>>From: Edgardo O. Gonzales II [ mailto:edgardo.g at pacific.net.ph]
>>Sent: Monday, April 25, 2005 6:22 PM
>>To: Kofi Obiri-Yeboah
>>Cc: serusers at lists.iptel.org
>>Subject: RE: [Serusers] ACC into mysql
>>
>>Hi Kofi!
>>got it.. thanks for immediate feedback .. however my accounting is not
>>working.
>>any parameters to be added to make it work..
>>I have the following info already on my ser.cfg
>>modparam("acc", "log_level", 1)
>>modparam("acc", "log_flag", 1)
>>modparam("acc", "log_missed_flag", 3)
>>
>>record_route(); -> its this a parameter for accounting
>>thanks,
>>ed
>>
>>At 08:32 AM 4/26/2005, Kofi Obiri-Yeboah wrote:
>>>I think the correct modparam statement should read as follows:
>>>modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
>>>
>>>please note that "my" is required in front of sql
>>>
>>>and not:
>>>modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")
>>>
>>>-----Original Message-----
>>>From: serusers-bounces at iptel.org [ mailto:serusers-bounces at lists.iptel.org]On
>>>Behalf Of Edgardo O. Gonzales II
>>>Sent: Monday, April 25, 2005 5:20 PM
>>>To: serusers at lists.iptel.org
>>>Subject: Re: [Serusers] ACC into mysql
>>>
>>>Hi all!
>>>Im also receiving this error message.
>>>Can somebody help us on how to make accounting work using mysql.
>>>thanks,
>>>ed
>>>At 06:01 AM 4/26/2005, Leon Sun wrote:
>>>>Hi,
>>>>I am using 0.8.12 in Fedora 3. I tried to log account info into Mysql
>>>>followed instruction from manual. I found, first, modparam("acc",
>>>>"db_url", "sql://ser:heslo@localhost/ser") coudnlt work at all in
>>>>ser.cfg. If I enabled in cfg file, it showed Starting ser: ERROR: bad
>>>>config file (1 errors)
>>>>If I disabled it, SER worked fine but I couldnt see any record in acc
>>>>table.
>>>>Would anyone suggest how to put call records into Mysql?
>>>>Thank you.
>>>>
>>>># ----------- global configuration parameters ------------------------
>>>>#debug=3 # debug level (cmd line: -dddddddddd)
>>>>#fork=yes
>>>>#log_stderror=no # (cmd line: -E)
>>>>/* Uncomment these lines to enter debugging mode
>>>>debug=7
>>>>fork=no
>>>>log_stderror=yes
>>>>*/
>>>>check_via=no # (cmd. line: -v)
>>>>dns=no # (cmd. line: -r)
>>>>rev_dns=no # (cmd. line: -R)
>>>>#port=5060
>>>>#children=4
>>>>fifo="/tmp/ser_fifo"
>>>># ------------------ module loading ----------------------------------
>>>># Uncomment this if you want to use SQL database
>>>>loadmodule "/usr/lib/ser/modules/mysql.so"
>>>>loadmodule "/usr/lib/ser/modules/acc.so"
>>>>loadmodule "/usr/lib/ser/modules/sl.so"
>>>>loadmodule "/usr/lib/ser/modules/tm.so"
>>>>loadmodule "/usr/lib/ser/modules/rr.so"
>>>>loadmodule "/usr/lib/ser/modules/maxfwd.so"
>>>>loadmodule "/usr/lib/ser/modules/usrloc.so"
>>>>loadmodule "/usr/lib/ser/modules/registrar.so"
>>>># Uncomment this if you want digest authentication
>>>># mysql.so must be loaded !
>>>>loadmodule "/usr/lib/ser/modules/auth.so"
>>>>loadmodule "/usr/lib/ser/modules/auth_db.so"
>>>># ----------------- setting module-specific parameters ---------------
>>>>#modparam("acc", "db_url", "sql://ser:heslo@localhost/ser")
>>>># -- usrloc params --
>>>>#modparam("usrloc", "db_mode", 0)
>>>># Uncomment this if you want to use SQL database
>>>># for persistent storage and comment the previous line
>>>>modparam("usrloc", "db_mode", 2)
>>>># -- auth params --
>>>># Uncomment if you are using auth module
>>>>#
>>>>modparam("auth_db", "calculate_ha1", yes)
>>>>#
>>>># If you set "calculate_ha1" parameter to yes (which true in this config),
>>>># uncomment also the following parameter)
>>>>#
>>>>modparam("auth_db", "password_column", "password")
>>>># -- rr params --
>>>># add value to ;lr param to make some broken UAs happy
>>>>modparam("rr", "enable_full_lr", 1)
>>>>modparam("acc","log_level",1)
>>>>modparam("acc","log_flag",1)
>>>># ------------------------- request routing logic -------------------
>>>># main routing logic
>>>>route{
>>>> # initial sanity checks -- messages with
>>>> # max_forwards==0, or excessively long requests
>>>> if (!mf_process_maxfwd_header("10")) {
>>>> sl_send_reply("483","Too Many Hops");
>>>> break;
>>>> };
>>>> if ( msg:len > max_len ) {
>>>> sl_send_reply("513", "Message too big");
>>>> break;
>>>> };
>>>> # we record-route all messages -- to make sure that
>>>> # subsequent messages will go through our proxy; that's
>>>> # particularly good if upstream and downstream entities
>>>> # use different transport protocol
>>>> record_route();
>>>> # loose-route processing
>>>> if (loose_route()) {
>>>> if (method=="BYE") {
>>>> setflag(1);
>>>> setflag(2);
>>>> }
>>>> t_relay();
>>>> break;
>>>> };
>>>> #labeled all transaction for accounting
>>>> setflag(1);
>>>> setflag(2);
>>>> if (method=="CANCEL"){
>>>> t_relay();
>>>> };
>>>> # (in case, it does not work, use the following command
>>>> # with proper names and addresses in it)
>>>> if (uri==myself) {
>>>> # This for PSTN destination
>>>> if (uri=~"^sip:1")
>>>> { rewritehost("10.10.10.10");
>>>> forward(10.10.10.10,5060);
>>>> break;
>>>> }
>>>> if (method=="REGISTER") {
>>>> # Uncomment this if you want to use digest authentication
>>>> if (!www_authorize("sip.mycommunications.com",
>>>> "subscriber")) {
>>>>
>>>>www_challenge("sip.mycommunications.com", "0");
>>>> break;
>>>> };
>>>> save("location");
>>>> break;
>>>> };
>>>> # native SIP destinations are handled using our USRLOC DB
>>>> if (!lookup("location")) {
>>>> sl_send_reply("404", "Not Found");
>>>> break;
>>>> };
>>>> };
>>>> # forward to current uri now; use stateful forwarding; that
>>>> # works reliably even if we forward from TCP to UDP
>>>> if (!t_relay()) {
>>>> sl_reply_error();
>>>> };
>>>>}
>>>>_______________________________________________
>>>>Serusers mailing list
>>>>serusers at lists.iptel.org
>>>>http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050430/1c35ac19/attachment.htm>
More information about the sr-users
mailing list