[Serusers] ser radius routing problems.

[sait at karalar.com]

My CFG file is here.

Note that: SER crashes when I make a call.

 0(11895) get_hdr_field: cseq <CSeq>: <1> <INVITE>
 0(11895) header field type 16, name=<CSeq>, body=<1 INVITE>
 0(11895) parse_headers: flags=4
 0(11895) DEBUG: t_reply_matching: hash 6732 label 192727755 branch 0
 0(11895) DEBUG: t_reply_matching: reply matched (T=0x402ed130)!
 0(11895) DBG: callback type 1, id 5 entered
 2(11900) ERROR: fifo_server fgets failed: Illegal seek
 2(11900) ERROR: fifo_server fgets failed: Illegal seek
 2(11900) ERROR: fifo_server fgets failed: Illegal seek
 2(11900) ERROR: fifo_server fgets failed: Illegal seek
 1(11898) INFO: signal 15 received



CFG file is:
=============

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/opt/interSER/lib/modules/mysql.so"

loadmodule "/opt/interSER/lib/modules/sl.so"
loadmodule "/opt/interSER/lib/modules/tm.so"
loadmodule "/opt/interSER/lib/modules/rr.so"
loadmodule "/opt/interSER/lib/modules/maxfwd.so"
loadmodule "/opt/interSER/lib/modules/usrloc.so"
loadmodule "/opt/interSER/lib/modules/registrar.so"
#loadmodule "/opt/interSER/lib/modules/group_radius.so"
#loadmodule "/opt/interSER/lib/modules/group.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/opt/interSER/lib/modules/auth.so"
loadmodule "/opt/interSER/lib/modules/auth_db.so"
loadmodule "/opt/interSER/lib/modules/auth_radius.so"
loadmodule "/opt/interSER/lib/modules/acc.so"
#loadmodule "/opt/interSER/lib/modules/uri.so"
# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
#modparam("usrloc", "db_mode",   0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)

modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy

modparam("rr", "enable_full_lr", 1)
modparam("auth_radius","radius_config","/opt/rad_client/etc/radiusclient/radiusclient.conf")
modparam("auth_radius","service_type",15)
modparam("acc", "log_level", 1)
modparam("acc",
"radius_config","/opt/rad_client/etc/radiusclient/radiusclient.conf")
modparam("acc", "service_type", 15)
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 3)



# -------------------------  request routing logic -------------------

# main routing logic


route{

setflag(1);
# Some LOG commands here

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };

        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        record_route();
        # loose-route processing
        if (loose_route()) {
                t_relay();
                break;
        };


        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {

                if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
                        if (!radius_www_authorize("")) {
                                www_challenge("", "1");
                                break;
                        };
                        save("location");
                        break;
                };

# Some other LOG commands here
                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        if (!t_relay()) {
                sl_reply_error();
        };

}