[Serusers] Ser Postgresql Problems

[RAceala andrei]

I am trying to setup ser to use a posgresql databse. Everythig is ok until i try to register to SIP server with SjPhone when i get the following errors:

PG[129] connect_db Error while parsing it Register
PG[488] begin_transaction no connection, FATAL -3!
get_ha1(): Error while querying database

 Any ideeas ?

This is my ser.cfg

#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)


# Uncomment these lines to enter debugging mode 
#debug=3
fork=no
log_stderror=no
listen=193.***.***.***

check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
alias=test.ro

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/postgres.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 0)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

modparam ("auth_db","db_url", "sql://blahblah:blahblah@localhost:5432/ser")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

 # initial sanity checks -- messages with
 # max_forwards==0, or excessively long requests
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  break;
 };
 if ( msg:len > max_len ) {
  sl_send_reply("513", "Message too big");
  break;
 };

 # we record-route all messages -- to make sure that
 # subsequent messages will go through our proxy; that's
 # particularly good if upstream and downstream entities
 # use different transport protocol
 record_route(); 
 # loose-route processing
 if (loose_route()) {
  t_relay();
  break;
 };

 # if the request is for other domain use UsrLoc
 # (in case, it does not work, use the following command
 # with proper names and addresses in it)
 if (uri=~test.ro) {
     log (1,"Cerere pt test.ro\n");
  if (method=="REGISTER") {
  log (1,"Am primit Register\n");
# Uncomment this if you want to use digest authentication
   if (!www_authorize("test.ro", "subscriber")) {
    www_challenge("test.ro", "0");
    break;
   };

   save("location");
   log (1,"User Existent\n");
   break;
  };
  # native SIP destinations are handled using our USRLOC DB
  if (!lookup("location")) {
   sl_send_reply("404", "Not Found");
   log (1,"User Inexistent\n");
   break;
  };
 };
 # forward to current uri now; use stateful forwarding; that
 # works reliably even if we forward from TCP to UDP
 if (!t_relay()) {
  sl_reply_error();
 };

}

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050107/be6a5a1e/attachment.htm>