[Serusers] SER with pa module including publish (ERROR)

[Jesús M. Movilla]

Than you for your suggestions.
I wil try it and I will tell you. Now I am trying to install the 0.9.0
version which also includes a publish.c class in the pa module ;-). Maybe, i
will be luckier :-).
But I found problems when starting with mysql.so module because this module
was not compiled when executed "make bin" (I removed the mysql from the
exclude_modules).

Anyway I will tell you later. So kind for your answers

Hope I can help you too in the future

Regards

    Jesús

----- Original Message ----- 
From: "Samuel Osorio Calvo" <samuel.osorio at nl.thalesgroup.com>
To: <jlbravo at acotelsa.com>; <jamey.hicks at hp.com>; <jmms03 at tid.es>
Cc: <serusers at lists.iptel.org>
Sent: Friday, June 10, 2005 10:36 AM
Subject: Re: [Serusers] SER with pa module including publish (ERROR)


Have you checked the format of the config file?? It might be in DOS format
and SER is not able to load it. Just to be sure you can use dos2unix command
(I had some problem with some version in the sense that this command
modified the permissions of the file upon converting....)

Hope it helps,

Samuel.


Unclassified.
>>> "Jesús M. Movilla" <jmms03 at tid.es> 06/10/05 08:22AM >>>
Hi again,

I tried to startup SER deleting the first line of ser.cfg but it didn't work
(similar problem). However I installed the 0.8.14 SER version and there was
no problem in starting up the SER with the previous failing ser.cfg.

¿any other idea?

Thanks for your answers

            Jesús

P.D.- The ser.cf used is included down here. I put comments on the proper
function (handle_subscription, for example) of  0.10. pa module version to
start it up properly with 0.8.14 version.

####################################################################


# global configuration parameters a

debug=7         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=yes # (cmd line: -E)
#memlog=5 # memory debug log level
#log_facility=LOG_LOCAL0 # sets the facility used for logging (see
syslog(3))

/* Uncomment these lines to enter debugging mode */
fork=no
log_stderror=yes


check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
#user=ser
#group=ser
#fifo_user=ser # owner of the ser fifo
#fifo_group=ser
#fifo_mode=0660 # fifo's permissions
#disable_core=yes #disables core dumping
#open_fd_limit=1024 # sets the open file descriptors limit
#mhomed=yes  # usefull for multihomed hosts, small performance penalty
#disable_tcp=yes
#tcp_accept_aliases=yes # accepts the tcp alias via option (see NEWS)

#

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/pa.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -- pa params --
#
#modparam("pa", "default_expires", 3600) #Set default_expires parameter
#modparam("pa", "default_priority_percentage", 50) #Set
default_priority_percentage parameter
#modparam("pa", "db_url", "mysql:ser:heslo at localhost/ser") #Set db_url
parameter
#modparam("pa", "pa_domain", "hi.inet") #Set pa_domain parameter


# -------------------------  request routing logic -------------------

# main routing logic

route{

 # initial sanity checks -- messages with
 # max_forwards==0, or excessively long requests
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  break;
 };
 if (msg:len >=  max_len ) {
  sl_send_reply("513", "Message too big");
  break;
 };

 # we record-route all messages -- to make sure that
 # subsequent messages will go through our proxy; that's
 # particularly good if upstream and downstream entities
 # use different transport protocol
 if (!method=="REGISTER") record_route();

 # subsequent messages withing a dialog should take the
 # path determined by record-routing
 if (loose_route()) {
  # mark routing logic in request
  append_hf("P-hint: rr-enforced\r\n");
  route(1);
  break;
 };

 #if (!uri=~"hi.inet" {
  # mark routing logic in request
 # append_hf("P-hint: outbound\r\n");
 # route(1);
 # break;
 #};

 # if the request is for other domain use UsrLoc
 # (in case, it does not work, use the following command
 # with proper names and addresses in it)
 if (uri=~"hi.inet") {

  if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
   if (!www_authorize("hi.inet", "subscriber")) {
    www_challenge("hi.inet", "0");
    break;
   };

   save("location");
   break;
  };

  lookup("aliases");
  if (!uri=~"hi.inet") {
   append_hf("P-hint: outbound alias\r\n");
   route(1);
   break;
  };

  if (method=="PUBLISH") {
       if (!t_newtran()) {
           log(1, "newtran error\n");
           sl_reply_error();
       };
       #handle_publish("registrar");
       break;
  };

  # native SIP destinations are handled using our USRLOC DB
  if (!lookup("location")) {
   sl_send_reply("404", "Not Found");
   break;
  };
 };
 append_hf("P-hint: usrloc applied\r\n");
 route(1);
}

route[1]
{
 # send it out now; use stateful forwarding as it works reliably
 # even for UDP2TCP
 if (!t_relay()) {
  sl_reply_error();
 };
}

_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers