[Serusers] Handoff to PSTN
Iqbal
iqbal at gigo.co.uk
Fri Sep 16 13:16:25 CEST 2005
Hi
I need to see the ser.cfg, or to make life easier use one from
onsip.org, which is a good little get started guide, and will connect to
pstn, u just pretty much cut and paste the config make a few changes and
away you go
iqbal
Colin Jordan wrote:
>I do not too much about this, can please let me know where and in what part
>of the ser.cfg it will be?
>
>
>-----Original Message-----
>From: Iqbal [mailto:iqbal at gigo.co.uk]
>Sent: Friday, September 16, 2005 12:07 PM
>To: cjordan at econetwireless.com; olivier.taylor at gmail.com
>Cc: serusers at lists.iptel.org
>Subject: RE: [Serusers] Handoff to PSTN
>
>
>where u route your INVITE
>
>Iqbal
>
>On 9/16/2005, "Colin Jordan" <cjordan at econetwireless.com> wrote:
>
>
>
>>Where should I insert it in the code below?
>>
>>
>>
>># attempt handoff to PSTN
>>
>>if (uri=~“^sip:9[0-9]*@mydomain.com”) {
>>
>>log(“Forwarding to PSTN\n”);
>>
>>t_relay_to( “192.168.0.2”, “5060”);
>>
>>break;
>>
>>};
>>
>>
>>
>>
>>
>> _____
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 4:00 PM
>>To: 'Colin Jordan'
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>prefix("666")
>>
>>-----Message d'origine-----
>>De : serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] De la
>>part de Colin Jordan
>>Envoyé : jeudi 15 septembre 2005 15:19
>>À : 'Olivier Taylor'
>>Cc : serusers at lists.iptel.org
>>Objet : RE: [Serusers] Handoff to PSTN
>>
>>The PSTN has given me a prefix of 666# to dial before the number, where can
>>I insert this so that it will allow me to make a call?
>>
>>
>>
>>
>> _____
>>
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 2:58 PM
>>To: 'Colin Jordan'
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>module tm
>>
>>-----Message d'origine-----
>>De : Colin Jordan [mailto:cjordan at econetwireless.com]
>>Envoyé : jeudi 15 septembre 2005 14:55
>>À : 'Olivier Taylor'
>>Cc : serusers at lists.iptel.org
>>Objet : RE: [Serusers] Handoff to PSTN
>>
>>t_relay_to( “192.168.0.2”, “5060”);
>>
>>
>>
>>
>>
>>
>> _____
>>
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 2:50 PM
>>To: 'Colin Jordan'
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>what's on the line 143???
>>
>>-----Message d'origine-----
>>De : Colin Jordan [mailto:cjordan at econetwireless.com]
>>Envoyé : jeudi 15 septembre 2005 14:46
>>À : 'Olivier Taylor'
>>Cc : serusers at lists.iptel.org
>>Objet : RE: [Serusers] Handoff to PSTN
>>
>>The line 143 points to the script below. What modules will it be looking
>>for?
>>
>>
>>
>>
>> _____
>>
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 2:33 PM
>>To: 'Colin Jordan'
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>please reply to all
>>
>>
>>
>>u have a module not loaded, the one involved on line 143
>>
>>
>>
>>
>>
>>Olivier
>>
>>
>>
>>-----Message d'origine-----
>>De : Colin Jordan [mailto:cjordan at econetwireless.com]
>>Envoyé : jeudi 15 septembre 2005 14:28
>>À : 'Olivier Taylor'
>>Objet : RE: [Serusers] Handoff to PSTN
>>
>>It gives me the following message:
>>
>>_______________________________________________________
>>
>>
>>
>>Parse error (143,40-41): unknown command missing loadmodule?
>>
>>_______________________________________________________
>>
>>
>> _____
>>
>>
>>From: Olivier Taylor [mailto:olivier.taylor at gmail.com]
>>Sent: Thursday, September 15, 2005 1:21 PM
>>To: 'Colin Jordan'; serusers-request at lists.iptel.org
>>Cc: serusers at lists.iptel.org
>>Subject: RE : [Serusers] Handoff to PSTN
>>
>>
>>
>>just have a look at /var/log/messages u will find the line number where
>>
>>
>the
>
>
>>error occurs
>>
>>
>>
>>Olivier
>>
>>-----Message d'origine-----
>>De : serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] De la
>>part de Colin Jordan
>>Envoyé : jeudi 15 septembre 2005 12:33
>>À : serusers-request at lists.iptel.org
>>Cc : serusers at lists.iptel.org
>>Objet : [Serusers] Handoff to PSTN
>>
>>
>>
>>I am not able to restart ser if I put he code below in the ser.cfg to
>>handoff calls to PSTN.
>>
>>
>>
>># attempt handoff to PSTN
>>
>>if (uri=~“^sip:9[0-9]*@mydomain.com”) {
>>
>>log(“Forwarding to PSTN\n”);
>>
>>t_relay_to( “192.168.0.2”, “5060”);
>>
>>break;
>>
>>};
>>
>>
>>
>>
>>
>>Please help!!!!
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>DISCLAIMER: The information in this message is confidential and is legally
>>privileged. It is intended solely for the addressee. Access to this message
>>by
>>anyone else is unauthorized.If receiving in error please accept our
>>apologies
>>and notify the sender immediately. You must also delete the original
>>message from your machine. If you are not the intended recipient, any use,
>>disclosure, copying, distribution or action taken in reliance of it, is
>>prohibited
>>and maybe
>>unlawful.
>>
>>
>>
>>
>>
>>
>>
>
>
>.
>
>
>
More information about the sr-users
mailing list