[Serusers] SER config

[Natambu Obleton]

I just figured this out by reading a lot of stuff online. You need to set
this option in SER.

mhomed=1

Although, I am using mediaproxy and according to the session log, the rtp
path is going from the public ip, but things seem to be working.

Natambu Obleton
Network Engineer
FastTrack Communications
nobleton at fasttrackcomm.net
(970) 247-3366 office
(970) 247-2426 fax
 

-----Original Message-----
From: serusers-bounces at lists.iptel.org
[mailto:serusers-bounces at lists.iptel.org] On Behalf Of Sebastian Gabris
Sent: Wednesday, August 02, 2006 5:44 AM
To: serusers at lists.iptel.org
Subject: [Serusers] SER config

Hello everybody,

I'm new to SER and try to write my first config file. After reading the
Admin guide & the getting started Tutorial on onsip I still cannot configure
my SER.

In the test setup I have two systems --
1. The Linux server ( where the SER is running)
2. one win XP system ( SIP UA).

The linux server has two LAN cards one with a private IP and one with a
public one. 
The SIP - Client has an account at a VoIP - Provider (sipgate).
What I want the SER to do is to forward the call to the provider and to
accept incoming calls. 
No authorisation or mysql things nedeed.

I put in the cfg - file that SER should listen on both(public & private)
interfaces.

Until now SER forwards the call but he doesn't change the  private IP -
Address to the public one.


Any ideas how I could solve the problem?

Thanks in advance and excuse my bad english :-) 

             


______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193

_______________________________________________
Serusers mailing list
Serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers