[Serusers] Voice Mail problem

[Greger V. Teigre]

Please copy serusers.

It's your failure route you should look at!
g-)

ram wrote:
> Hi
>  
> iam following the same document only to make my voice mail work
> below is my config, its works if the user is registered locally
> and if not available it will moving to voicemail
>  
> But when iam dialing PSTN still its going to voicemail
>  
> Aug 25 11:05:19 cdrouter ser[9337]: **************** vm start - begin 
> ******************
> Aug 25 11:05:19 cdrouter Sems[802]: Error: 404 voicemail: no email 
> address for user <1XXXXXX360>
> Aug 25 11:05:19 cdrouter ser[9348]: ACC: call missed: from=99999 < 
> sip:99999 at domain.com <mailto:sip:99999 at domain.com>>;tag=2858293102, 
> i-uri=sip:1XXXXXXX360 at domain.com <mailto:sip:1XXXXXXX360 at domain.com>, 
> method=INVITE, o-uri= sip:1XXXXXX360 at domain.com 
> <mailto:sip:1XXXXXX360 at domain.com>, code=404 Not Found
> Aug 25 11:05:19 cdrouter ser[9337]: **************** vm start - end 
> ******************
>  
>
> ------------
>                 if (!lookup("location")) {
>
>                         # Voicemail specific configuration - begin
>
>                         if(method=="ACK" || method=="INVITE" || 
> method=="BYE"){
>
>                         setflag(2);
>                         if(t_newtran()){
>
>                                 t_reply("100","Trying -- just wait a 
> minute !");
>
>                                 if(method=="INVITE"){
>                                         log(1,"**************** vm 
> start - begin ******************\n");
>                                         
> if(!vm("/tmp/am_fifo","voicemail")){
>                                         log("could not contact the 
> answer machine\n");
>                                         t_reply("500","could not 
> contact the answer machine");
>                                 };
>                                 log(1,"**************** vm start - end 
> ******************\n");
>                                 break;
>                         };
>
>                         if(method=="BYE"){
>                                 log(1,"**************** vm end - begin 
> ******************\n");
>                                 if(!vm("/tmp/am_fifo","bye")){
>                                         log("could not contact the 
> answer machine\n");
>                                         t_reply("500","could not 
> contact the answer machine");
>                                 };
>                                 log(1,"**************** vm end - end 
> ******************\n");
>                                 break;
>                          };
>                 }
>                 else {
>                         log("could not create new transaction\n");
>                         sl_send_reply("500","could not create new 
> transaction");
>                 };
>
>
>                 /* Not found*/
>                 sl_send_reply("404","Not Found");
>                 };
>                 # Voicemail specific configuration - end
>         };
>
>
>
>  
> On 8/24/06, *Greger V. Teigre* <greger at teigre.com 
> <mailto:greger at teigre.com>> wrote:
>
>     Look at the features-callfwd.cfg example from onsip.org
>     <http://onsip.org/>, now available here:
>     http://www.iptel.org/ser/doc/gettingstarted
>     g-)
>
>     ram wrote:
>     Hi
>      
>     I have existing SER Running
>      
>     i have local users ( extensions) and DID ( all other countries)
>      
>     iam able to make calls in and out , there is no problem
>      
>     but when the user not available, it has to send to  Voice mail,
>     but its only sending the users
>     who are locally start with 9*,
>      
>     how can i send the user start with  9 or any DID  not availble
>     send to voicemail
>      
>     here is my config
>      
>
>      if (!lookup("location") &&
>                     ( uri=~"^sip:9.*@domain.com <mailto:9.*@domain.com>" )
>                     ) {
>
>                             # Voicemail specific configuration - begin
>
>                             if(method=="ACK" || method=="INVITE" ||
>     method=="BYE"){
>
>                             setflag(2);
>                             if(t_newtran()){
>
>                                     t_reply("100","Trying -- just wait
>     a minute !");
>
>                                     if(method=="INVITE"){
>                                             log(1,"**************** vm
>     start - begin ******************\n");
>                                            
>     if(!vm("/tmp/am_fifo","voicemail")){
>                                             log("could not contact the
>     answer machine\n");
>                                             t_reply("500","could not
>     contact the answer machine");
>                                     };
>                                     log(1,"**************** vm start -
>     end ******************\n");
>                                     break;
>                             };
>
>                             if(method=="BYE"){
>                                     log(1,"**************** vm end -
>     begin ******************\n");
>                                     if(!vm("/tmp/am_fifo","bye")){
>                                             log("could not contact the
>     answer machine\n");
>                                             t_reply("500","could not
>     contact the answer machine");
>                                     };
>                                     log(1,"**************** vm end -
>     end ******************\n");
>                                     break;
>                              };
>                     }
>                     else {
>                             log("could not create new transaction\n");
>                             sl_send_reply("500","could not create new
>     transaction");
>                     };
>
>                     break;
>                     };
>             break;
>             };
>
>      
>
>     any help will be great
>
>      
>
>     Ram
>
>     ------------------------------------------------------------------------
>
>     _______________________________________________
>     Serusers mailing list
>     Serusers at lists.iptel.org <mailto:Serusers at lists.iptel.org>
>     http://lists.iptel.org/mailman/listinfo/serusers
>       
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20060825/6f516d7e/attachment.htm>