[Users] Mediant 2000 and SER, caller ID issue

Hakan YASTI hakanyasti at gmail.com
Fri Dec 8 13:42:35 CET 2006


Hi nick,
>From Mediant 2000, STATUS  & DIAGNOSTICS, Go to Message LOG and check any 
call to understand that you are sending CLI or not.

INVITE sip:03224284141 at domain.com;user=phone SIP/2.0
Via: SIP/2.0/UDP 84.51.43.60;branch=z9hG4bKac1669285176
Max-Forwards: 70
From: <sip:902124102525 at yourdomain.com>;tag=1c1669277115
To: <sip:03224284141 at yourdomain.com;user=phone>
Call-ID: 1669276299121200075944 at 84.51.43.60
CSeq: 1 INVITE
Contact: <sip:902124102525 at 10.10.43.60>
Supported: em,100rel,timer,replaces,path
Allow: 
REGISTER,OPTIONS,INVITE,ACK,CANCEL,BYE,NOTIFY,PRACK,REFER,INFO,SUBSCRIBE,UPDATE
User-Agent: Audiocodes-Sip-Gateway-Mediant 2000/v.4.60A.025
Content-Type: application/sdp
Content-Length: 275

v=0
o=AudiocodesGW 1669253469 1669253048 IN IP4 10.10.43.60
s=Phone-Call
c=IN IP4 10.10.43.60
t=0 0
m=audio 6270 RTP/AVP 18 0 96
a=rtpmap:18 g729/8000
a=fmtp:18 annexb=no
a=rtpmap:0 pcmu/8000
a=rtpmap:96 telephone-event/8000
a=fmtp:96 0-15
a=ptime:20
a=sendrecv

And then you can capture packets that sending from openser to pstn 
gateway.And see there is CLI or not.

Hakan.


----- Original Message ----- 
From: "Nick De Cristofaro" <nickdc at link2exchange.com>
To: <users at openser.org>
Sent: Thursday, December 07, 2006 10:21 PM
Subject: [Users] Mediant 2000 and SER, caller ID issue


Hello all,

Trying to debug a problem in regards to Caller IDs not being showed
through our PSTN gateway. Not sure if this is an issue with the ser or
with the mediant 2000 gateway or somewhere else but any help to this
issue would be great. I am new to this and we are trying to solve this
problem, basically one of our boxes isn't providing caller ID to the
PSTN network when users are calling. Basically they will show up as
"private number" when calls are initiated from inside and terminating on
the PSTN networking, when they are terminating inside the ser itself the
caller ID shows up with no problem, but not on the outside. We wish to
have the ability to show private numbers and to show public numbers, but
as far as it goes right now everyone is supposed to have public numbers.
Where might the problem be?

Any help would be great

Thanks
Nick

_______________________________________________
Users mailing list
Users at openser.org
http://openser.org/cgi-bin/mailman/listinfo/users 





More information about the sr-users mailing list