[Kamailio-Users] Carrierroute and or LCR

[Henning Westerholt]

On Tuesday 14 April 2009, Stagg Shelton wrote:
> I am preparing to add a new upstream SIP provider to my network, and
> now have a requirement to route based on the number that the user is
> calling.  From what I have read it appears that LCR is the better
> method for doing this.

Hi Stagg,

lcr is probably easier to setup for such a scenario. But cr supports 
least-cost routing of course also just fine.

> I have one small issue in that I have a few 
> customers who switch through my network in order to get to a specific
> carrier.  Currently I am using carrierroute with all of my customers
> in order to support the ones that need to switch to specific carriers,
> and everyone else takes the default carrierroute.
>
> Can carrierroute and LCR be used together? 

I think you should be able to combine cr with any other module. It just 
rewrites the request URI of the message, it doesn't do anything special. But 
you should evaluate if its really better (in the long run) to use two routing 
modules with a different logic and deployement requirements, then to use only 
one which perhaps fits not 100% to your needs.

> If so can you give me a 
> few pointers so that I can get a lab system working. 

You could for example just use the group module to check your users against a 
table if you choose the cr or the lcr path in your config.

if (is_user_in("lcr")) {
	# do lcr route
} else {
	cr_route(..)
}
t_relay();

> If not can you 
> suggest whether or not carrierroute could or should be used to route
> based on rate center.  The rate center list from my new carrier is
> about 31,000 rows.

Both lcr and cr should be work just fine with this number of routing rules.

Cheers,

Henning