[SR-Users] force_send_socket - multiple times per dialog, subsequent times fail

[Geoffrey Mina]

Yeah, Juha's suggestion worked perfectly.  As soon as I moved the
force_send_socket() call into branch_route everything started working.

Thanks.

On Tue, Jun 29, 2010 at 5:20 AM, Klaus Darilion <
klaus.mailinglists at pernau.at> wrote:

> IIRC force_send_socket operates on "branch[0]". Now it depends how the the
> new branch is added, e.g. if send--socket properties are copied into new
> branch or not. IRRC there were some changes either in 1.5 or 3.0.
>
> You can also access a branch's aprameter directly:
>
> http://sip-router.org/wiki/cookbooks/pseudo-variables/devel#branch_attributes
>
> or try Juha's suggestion with branch_route
>
> regards
> klaus
>
> Am 28.06.2010 19:08, schrieb Geoffrey Mina:
>
>> I am having an issue with 1.5.4 where force_send_socket() isn't behaving
>> as I would expect.
>>
>> I have an LCR scenario where depending on which gateway I am sending to,
>> I send from a different socket.
>>
>> It appears that calling force_send_socket from failure_route has no
>> affect on the routing.  In my initial route block I call
>> force_send_socket(X.X.X.180:5060).  In my failure_route I am calling
>> force_send_socket(X.X.X.179:5060), yet after calling the subsequent
>> time, my sip trace and tcpdump are clearly showing kamailio is still
>> sending from X.X.X.180:5060.
>>
>> I have added a lot of debug lines, so I am 100% sure the second call to
>> force_send_socket is happening.
>>
>> Am I misusing this module in some way?
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20100629/c9cc7e93/attachment.htm>