No subject

when the prefixes are overlaping in terms of they are the same but with
different attrs like :
2       50   ^38.+              porvider_A
2       50   ^3802.+          porvider_B
*2       50   ^3806.+          porvider_C*
*2       50   ^3806.+          porvider_D*
*
*
here i understand that I should use priorities.

Does anyone knnows how this works ??

Thank you in advance
Alex
*
*

--0016363b9ce0c869ca04a77934a4
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Dear all,<div><br></div><div>I have these 3 entries in the dialplan:</div><=
div><br></div><div>dpid =A0 pr =A0 match_exp =A0 =A0 =A0attr</div><div><br>=
</div><div>2 =A0 =A0 =A0 50 =A0 ^38.+ =A0 =A0 =A0 =A0 =A0 =A0 =A0porvider_A=
</div><div>2 =A0 =A0 =A0 50 =A0 ^3802.+ =A0 =A0 =A0 =A0 =A0porvider_B</div>
<div>2 =A0 =A0 =A0 50 =A0 ^3806.+ =A0 =A0 =A0 =A0 =A0porvider_C</div><div><=
br></div><div>with the fifo command :</div><div><br></div><div><div><b>kamc=
tl fifo dp_translate 2 3806328881</b></div><div>Output::=A0</div><div>ATTRI=
BUTES::<b>=A0porvider_A</b></div>
</div><div><br></div><div>I would expect that the dialplan module would cho=
ose the third choice which is the correct one for this call.</div><div><br>=
</div><div>From the dialplan documentation i understand that the priority i=
s needed when the prefixes are overlaping in terms of they are the same but=
 with different attrs like :</div>
<div><div>2 =A0 =A0 =A0 50 =A0 ^38.+ =A0 =A0 =A0 =A0 =A0 =A0 =A0porvider_A<=
/div><div>2 =A0 =A0 =A0 50 =A0 ^3802.+ =A0 =A0 =A0 =A0 =A0porvider_B</div><=
div><b>2 =A0 =A0 =A0 50 =A0 ^3806.+ =A0 =A0 =A0 =A0 =A0porvider_C</b></div>=
</div><div><b>2 =A0 =A0 =A0 50 =A0 ^3806.+ =A0 =A0 =A0 =A0 =A0porvider_D</b=
></div>
<div><b><br></b></div><div>here i understand that I should use priorities.<=
/div><div><br></div><div>Does anyone knnows how this works ??</div><div><br=
></div><div>Thank you in advance</div><div>Alex</div><div><b><br></b></div>

--0016363b9ce0c869ca04a77934a4--