[SR-Users] Kamailio with asterisk for outbound calls

Vijay Thakur vijay.thakur at loopmethods.com
Thu Aug 23 08:31:40 CEST 2012


Thanks for clearing the doubts. You are very right, i am using kamailio 
as Media Relay.
Can you send me some specific document URL, from where i can configure 
Asterisk as PSTN Gateway.
Can we set Kamailio and Asterisk in one server.

Thanks in advance.

Vijay

  Thursday 23 August 2012 11:24 AM, Klaus Darilion wrote:
>
>
> On 22.08.2012 14:26, Vijay Thakur wrote:
>> Hi All Kamailio Experts,
>>
>> I have configured Kamailio (kamailio 3.1.5) as media server.
>
> Kamailio is a SIP proxy, not a media server. Maybe you mean that you 
> are using Kamailio with rtpproxy as media relay.
>
>> All things
>> are working fine. Now i want to use Asterisk (Asterisk 1.6) for Outbound
>> Calls. For this purpose i have followed the web page :
>
> If you wan to you Asterisk as PSTN gateway only, then there is no need 
> to follow this tutorial. This tutorial makes strong integration of 
> Kamailio and Asterisk. For PSTN gateway functionality there is no need 
> to integrate Kamailio and Asterisk - just configure Asterisk as 
> gateway and forwards PSTN calls from Kamailio to Asterisk (and vice 
> versa)
>
>> http://kb.asipto.com/asterisk:realtime:kamailio-3.1.x-asterisk-1.6.2-astdb. 
>>
>> In this page, some points are not clear for me , as given below:
>>
>> (1) In case you use *sipregs* you have to create a record for each
>> extension where to set the 'name' to value of 'name' from *sipusers*.
>> The rest is populated by Asterisk from registrations.
> >
>> (2) Be sure you configure Asterisk *to not authenticate* SIP requests
>> coming from Kamailio.
>>
>> I am not sure that my local users chat is working through kamailio or
>> asterisk, who is used for authorization.
>
> What do you mean with "not sure"? For instant messaging between users 
> there is no need to use Asterisk.
>
> In above setup the authentication is done by Kamailio only.
>
> regards
> Klaus
>> Any specific Web page to correct the issue will highly appreciated
>> according to my scenario.
>>
>> Kindly guide me. Thanks in advance.
>>
>> -- 
>> Best Regards,
>>
>> Vijay Thakur
>> (Assistant Manager - Networks)
>> Mobile   : +91 8744018065
>> Mail     :vijay.thakur at loopmethods.com
>>
>> Loop IT Methods Private Limited
>> 1st Floor, B-10, Sector-7, Noida, (U.P) India
>> Ph: +91 120 305 3481,82 (INDIA), +1 347 468 8631 (USA), +61 390 011 
>> 178 (AUS)
>> Fax: +91 971 728 330
>> Web:www.loopmethods.com
>>
>> LOOP Disclaimer 
>> -------------------------------------------------------------------------------------------------
>> This message (including any attachments) contains confidential 
>> information intended for a specific individual and purpose, and is 
>> protected by law. If you are not the intended recipient, you should 
>> delete this message and are hereby notified that any disclosure, 
>> copying, or distribution of this message, or the taking of any action 
>> based on it, is strictly prohibited.
>> ----------------------------------------------------------------------------------------------------------------- 
>>
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120823/4a279a7c/attachment.htm>


More information about the sr-users mailing list