[SR-Users] best way to start kamailio at boot

[Uri Shacked]

Hi again....

i installed kamailio 3.2.2 today.
i used the chkconfig tool to get kamailio run at boot.
i edited both /etc/init.d/kamailio and /etc/default/kamailio files to run
with 2048Mg of memory.
now, when i run /etc/init.d/kamailio start, it starts with the right amount
of memory.
when i rum "kamailio" only, it starts with 32Mb....

 i use centos 6.2 64bit.
any ideas?





On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked at gmail.com> wrote:

> Hi.
> I already checked it all. The kamailio start and stop command did not
> work. The init script i used was for debian. Now i use another script,
> for centos. It works. I add the kamailio proccess with chkconfig tool.
> Thanks.
>
> On 10/25/11, Sammy Govind <govoiper at gmail.com> wrote:
> > Thanks Alex,
> >
> > Hey Uri, can you check if you've /etc/init.d/kamailio file exists - open
> > that file if exists and cross verify few parameters.
> > Few of these are as follows
> >
> > PATH=/sbin:/bin:/usr/sbin:/usr/bin
> > DAEMON=*/usr/local/sbin/kamailio*
> > NAME=kamailio
> > DESC=kamailio
> > HOMEDIR=/var/run/
> > *PIDFILE*=$HOMEDIR/$NAME.pid
> > DEFAULTS=*/etc/default/kamailio.default*
>  > RUN_KAMAILIO=yes
> >
> > Make sure /etc/default/kamailio.default file exits. here are the
> contents of
> > my file.
> >
> > RUN_KAMAILIO=yes
> > USER=kamailio
> > GROUP=kamailio
> > MEMORY=64
> > DUMP_CORE=no
> >
> > On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion <
> > klaus.mailinglists at pernau.at> wrote:
> >
> >> Test the startupscript if they work:
> >>
> >> /etc/init.d/kamailio start
> >> /etc/init.d/kamailio stop
> >>
> >> If this works, then make sure to have proper symlinks from the
> >> corresponding runlevel to the startup script. Do it manually or use the
> >> chkconfig tool.
> >>
> >> klaus
> >>
> >>
> >> On 24.10.2011 08:00, Uri Shacked wrote:
> >>
> >>> hi again,
> >>> i found out that on my centos 5.4 the command start-stop-daemon that
> the
> >>> /etc/init.d/kamailio uses is not recognized.
> >>> it is kamailio3.2 any ideas?
> >>>
> >>>
> >>> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked at gmail.com
> >>> <mailto:ushacked at gmail.com>> wrote:
> >>>
> >>>    Hi,
> >>>    what is the best way to start kamailio at boot?
> >>>    the example in the install is not working for me....
> >>>
> >>>
> >>>
> >>>
> >>> ______________________________**_________________
> >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> >>> sr-users at lists.sip-router.org
> >>> http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> >>>
> >>
> >> ______________________________**_________________
> >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> >> sr-users at lists.sip-router.org
> >> http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> >>
> >
>
> --
> Sent from my mobile device
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20120201/d6b0702f/attachment.htm>