[SR-Users] siptrace source ip causes martians

[Alexandr Dubovikov]

Hi Thilio,

no, siptrace doesn't support this, but I think you can do it as ip route

i.e: http://lartc.org/howto/lartc.rpdb.multiple-links.html

Wbr,
Alexandr

4/22/2013 10:14 AM, Thilo Bangert wrote:
> Hi,
>
> i have a kamailio instance, which is connected to two subnets (A and B) and
> exchanges sip messages between them. I have setup the siptrace module to send
> hep tracing messages of all sip messages to a host in subnet B.
>
> This works really well for sip messages arriving on the IP of subnet B - for
> those arriving on subnet A however it doesnt work. The hep messages have the
> interface address of subnet A set as source address.
> Since the machine receiving the HEP messages also is connected to both subnet
> A and B, these messages are (correctly) rejected as martians and never reach
> the sipcapture module on that host.
>
> this is on kamailio 3.3.4.
>
> Is there a way to force the source IP of outgoing HEP messages in the siptrace
> module?
>
> thanks
> kind regards
> Thilo
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users