[SR-Users] cdp avps issues in kamailio 5.2

[Ivailo Dobrev]

Hello,

I was experience that on Debian. This is very old "feature" that maybe 
was not reported. Nothing related to upgrade I think. During restarts 
sometimes cdp cannot gets his IP. Everything seems to run fine, but this 
AVP is missing from diameter communication later on. This was reported 
in logs during restart as far I remember. And this event is not very 
often... and happens randomly :)

Regards,

Ivo

On 3/13/19 6:41 PM, Pafel wrote:
> Hmm, strange. I've updated from 5.2.1 to 5.2.2 and now I got 
> host-ip-address in capabilities exchange request. After several tests 
> I've stopped pcscf and again host-ip-address is not present in request 
> to hss. Then again I've started pcscf and host-ip-address was present. 
> During the tests with 5.2.1 pcscf was started.. but host-ip-address 
> wasn't available in capabilities exchange. Anyway, now everything is 
> ok. Thank you very much for your help.
>
> Regards,
> Pavel Siderov
>
> На ср, 13.03.2019 г. в 13:50 ч. Mojtaba <mespio at gmail.com 
> <mailto:mespio at gmail.com>> написа:
>
>     The sound is strange, Actually the host-IP-Addres should not be
>     missed in new version because it is mandatory option,
>     I guess it would be nice to check it with latest version again.
>     With Regards. Mojtaba
>
>     On Wed, Mar 13, 2019 at 2:07 PM Pavel S <pafels at gmail.com
>     <mailto:pafels at gmail.com>> wrote:
>
>         Hello Mojtava,
>
>         > Did you use FHOSS or IMS_DIAMETER_SERVER module?
>         No, I am using our own hss server.
>
>         >Anyway what mandatory parameters do you mean exactly?
>         According to RFC6733 section 5.3.1 -https://tools.ietf.org/html/rfc6733#section-5.3.1
>
>             The Capabilities-Exchange-Request (CER), indicated by the Command
>             Code set to 257 and the Command Flags' 'R' bit set, is sent to
>             exchange local capabilities.  Upon detection of a transport failure,
>             this message MUST NOT be sent to an alternate peer.
>
>             When Diameter is run over SCTP [RFC4960] or DTLS/SCTP [RFC6083],
>             which allow for connections to span multiple interfaces and multiple
>             IP addresses, the Capabilities-Exchange-Request message MUST contain
>             one Host-IP-Address AVP for each potential IP address that MAY be
>             locally used when transmitting Diameter messages.
>
>                Message Format
>
>                   <CER> ::= < Diameter Header: 257, REQ >
>                             { Origin-Host }
>                             { Origin-Realm }
>                          1* { Host-IP-Address }
>                             { Vendor-Id }
>                             { Product-Name }
>                             [ Origin-State-Id ]
>                           * [ Supported-Vendor-Id ]
>                           * [ Auth-Application-Id ]
>                           * [ Inband-Security-Id ]
>                           * [ Acct-Application-Id ]
>                           * [ Vendor-Specific-Application-Id ]
>                             [ Firmware-Revision ]
>                           * [ AVP ]
>
>         Kamailio 5.1 with loaded cdp, cdr_avp, ims_icsf modules and default configuration described herehttps://github.com/kamailio/kamailio/tree/master/misc/examples/ims/icscf  sends Host-IP-Address but Kamailio 5.2 with the same configuration doesn't.
>
>         Any idea how to fix it?
>
>         Regards,
>
>         Pavel Siderov
>
>         >Hello,
>         >The CER/CEA messages are used just for connections between two peers
>         >diameter interface. Did you use FHOSS or IMS_DIAMETER_SERVER module? In
>         >both cases, you should not have any issue. Anyway what mandatory parameters
>         >do you mean exactly?
>         >WIth Best Regards. Mojtava
>         ><https://www.kamailio.org/docs/modules/5.1.x/modules/ims_diameter_server.html>
>
>         >On Tue, Mar 12, 2019 at 8:17 PM Pafel <pafels at gmail.com  <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>> wrote:
>         >
>         >>/Hello, />>//>>/I am testing ims setup with kamailio 5.2 using the default
>         configuration />>/provided here: />>/https://github.com/kamailio/kamailio/tree/master/misc/examples/ims/
>         . />>/Тhere is an issue I am facing with cdp avp in request sent to
>         hss. There />>/are some missing mandatory parameters in capabilities
>         exchange request like />/> 257 host-ip-address for example. Any idea how to add it via
>         icscf.xml or />/> kamailio.cfg ? The same parameter is passed to hss with
>         kamailio 5.1 using />/> default ims configuration. I read cdp and cdp_avp
>         documentation but />/> couldn't understand if it is possible to add it. />>//>>/Regards, />>/Pavel Siderov />>/_______________________________________________ />>/Kamailio (SER) - Users Mailing List />>/sr-users at lists.kamailio.org
>         <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users> />/> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users />>
>
>         _______________________________________________
>         Kamailio (SER) - Users Mailing List
>         sr-users at lists.kamailio.org <mailto:sr-users at lists.kamailio.org>
>         https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
>     -- 
>     --Mojtaba Esfandiari.S
>     _______________________________________________
>     Kamailio (SER) - Users Mailing List
>     sr-users at lists.kamailio.org <mailto:sr-users at lists.kamailio.org>
>     https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190315/d2203c3e/attachment.html>