<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2734.1600" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello All,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Sorry for all the questions. I am new to this
(both SIP and SER) and just learning as I go. Thanks so much to all who
have helped me so far.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am just trying to setup some routing rules for
our application and am not having any luck with getting them to work
correctly.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have a Cisco Router which acts as the <FONT
face="Times New Roman" size=3>PSTN gateway. SER is installed on a Solaris
box which is, of course, the SIP router, and then I have an SIP phone as the end
point.</FONT></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The Cisco Router (PSTN gateway) is located at IP
10.10.1.5, the SER box is 10.10.0.55, and the SIP phone registers as
10.10.1.134. The telephone number assigned to the SIP phone is
864-678-3188.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The SIP phone registers with the SER server without
any problems, and all calls are routed through the Cisco router to the SER
server (from what I can tell) as well. However, I don't know how to
configure the routing correctly.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>All that I am trying to do right off the bat is to
get that one SIP phone to work.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>My first attempt at writing a routing script looks
like this (using a static route)..</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2> if
(uri=~"sip:8646783188")
{<BR>
forward(10.10.1.134, 5060);<BR>
};</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I have tried many variations of this route but all
to no avail.. :)</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Does anyone have a sample routing script that
should work for this specific configuration? If I could see a sample then
I think that I could build upon that.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any help would be very greatly
appreciated! </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Regards,</FONT></DIV>
<DIV><FONT face=Arial size=2>Darren Nay - <A
href="mailto:dnay@libertyisp.com">dnay@libertyisp.com</A></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>