<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 5.5.2654.45">
<TITLE>RE: [Serusers] Sems</TITLE>
</HEAD>
<BODY>
<BR>
<P><FONT SIZE=2>I'm sill working on this so I don't know if my conf files will work. But I'm following the example on <A HREF="http://iptel.org/~faqomatic/fom-serve/cache/92.html" TARGET="_blank">http://iptel.org/~faqomatic/fom-serve/cache/92.html</A> . Take a look.</FONT></P>
<P><FONT SIZE=2>Joćo</FONT>
</P>
<BR>
<P><FONT SIZE=2>-----Original Message-----</FONT>
<BR><FONT SIZE=2>From: 'Atle Samuelsen' [<A HREF="mailto:clona@cyberhouse.no">mailto:clona@cyberhouse.no</A>]</FONT>
<BR><FONT SIZE=2>Sent: segunda-feira, 26 de Janeiro de 2004 17:47</FONT>
<BR><FONT SIZE=2>To: Joao Sampaio</FONT>
<BR><FONT SIZE=2>Subject: Re: [Serusers] Sems</FONT>
</P>
<BR>
<P><FONT SIZE=2>btw, off the list: </FONT>
</P>
<P><FONT SIZE=2>How does your config look with the voicemail in ser? does it automaticly</FONT>
<BR><FONT SIZE=2>redirect to voicemail after XX seconds? </FONT>
<BR><FONT SIZE=2>if so. could you send me the needed in that config to get to work ?</FONT>
</P>
<P><FONT SIZE=2>- Atle</FONT>
</P>
<BR>
<P><FONT SIZE=2>* 'Atle Samuelsen' <clona@cyberhouse.no> [040126 18:39]:</FONT>
<BR><FONT SIZE=2>> Hm</FONT>
<BR><FONT SIZE=2>> did'nt have that problem.. Tho.. have you checked your database that</FONT>
<BR><FONT SIZE=2>> your user 1001 has a e-mail address?</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> - Atle</FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> * Joao Sampaio <est-j-sampaio@ptinovacao.pt> [040126 18:29]:</FONT>
<BR><FONT SIZE=2>> > Hello, thanks.</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > I found my problem (till now!) which was a bad sems configuration file.</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > Now voicemail is responding to the calls but I always get the message</FONT>
<BR><FONT SIZE=2>> > "Session rejected: 404 voicemail: no email address for user <1001> " on the</FONT>
<BR><FONT SIZE=2>> > caller phone.</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > Did you have the same problem?</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > Thanks</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > Jo?o</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > -----Original Message-----</FONT>
<BR><FONT SIZE=2>> > From: Atle Samuelsen [<A HREF="mailto:clona@cyberhouse.no">mailto:clona@cyberhouse.no</A>]</FONT>
<BR><FONT SIZE=2>> > Sent: segunda-feira, 26 de Janeiro de 2004 17:22</FONT>
<BR><FONT SIZE=2>> > To: Joao Sampaio</FONT>
<BR><FONT SIZE=2>> > Subject: Re: [Serusers] Sems</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > it looks like the same problem I had yesterday..</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > If I did understand the README file, I think the sems CVS and SER CVS</FONT>
<BR><FONT SIZE=2>> > works together but not SER no-Cvs + SEMS CVS. this is because of the</FONT>
<BR><FONT SIZE=2>> > upgrade of the fifo buffer thing.</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > - ATle</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > .. here's my modified default config..</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # $Id: sems.conf.sample,v 1.11 2003/11/19 19:03:22 rco Exp $</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # sems.conf.sample</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # Sip Express Media Server (sems)</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # sample configuration file</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # whitespaces (spaces and tabs) are ignored</FONT>
<BR><FONT SIZE=2>> > # comments start with a "#" and may be used inline</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # example: option=value1, value2 # i like this option</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > ##################################</FONT>
<BR><FONT SIZE=2>> > # global parameters #</FONT>
<BR><FONT SIZE=2>> > ##################################</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: fork={yes|no}</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - specifies if sems should run in daemon mode (background)</FONT>
<BR><FONT SIZE=2>> > # (fork=no is the same as -E)</FONT>
<BR><FONT SIZE=2>> > fork=yes</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: stderr={yes|no}</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - debug mode: do not fork and log to stderr</FONT>
<BR><FONT SIZE=2>> > # (stderr=yes is the same as -E)</FONT>
<BR><FONT SIZE=2>> > stderr=no</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: loglevel={0|1|2|3}</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets log level (error=0, warning=1, info=2, debug=3)</FONT>
<BR><FONT SIZE=2>> > # (same as -D)</FONT>
<BR><FONT SIZE=2>> > loglevel=1</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: fifo_name=<filename></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - path and file name of our fifo file (same as -i)</FONT>
<BR><FONT SIZE=2>> > fifo_name=/tmp/am_fifo</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: ser_fifo_name=<filename></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - path and file name of Ser's fifo file (same as -o)</FONT>
<BR><FONT SIZE=2>> > ser_fifo_name=/tmp/ser_fifo</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: plugin_path=<path></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets the path to the plug-ins</FONT>
<BR><FONT SIZE=2>> > # - may be absolute or relative to CWD</FONT>
<BR><FONT SIZE=2>> > plugin_path=/usr/local/lib/sems/plug-in</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: smtp_server=<hostname></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets address of smtp server</FONT>
<BR><FONT SIZE=2>> > smtp_server=localhost</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: smtp_port=<port></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets port of smtp server</FONT>
<BR><FONT SIZE=2>> > smtp_port=25</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > ##################################</FONT>
<BR><FONT SIZE=2>> > # module specific parameters #</FONT>
<BR><FONT SIZE=2>> > ##################################</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # sample voicemail configuration (inline)</FONT>
<BR><FONT SIZE=2>> > config.voicemail=inline</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: announce_path=<path></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets the path where announce files are searched for</FONT>
<BR><FONT SIZE=2>> > # - the file to be played is determined the following way:</FONT>
<BR><FONT SIZE=2>> > # <announce_path>/<domainname>/<username>.wav</FONT>
<BR><FONT SIZE=2>> > # if this file is not available <announce_path>/<default_anounce> is</FONT>
<BR><FONT SIZE=2>> > # used</FONT>
<BR><FONT SIZE=2>> > announce_path=/usr/local/lib/sems/audio/</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # parameter: default_announce=<filename></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets the name of the default announce WAV file</FONT>
<BR><FONT SIZE=2>> > default_announce=default.wav</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # parameter: max_record_time=<seconds></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - maximum record time</FONT>
<BR><FONT SIZE=2>> > max_record_time=30</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # end of configuration section for voicemail module</FONT>
<BR><FONT SIZE=2>> > config.voicemail=end</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # sample announcement configuration (inline)</FONT>
<BR><FONT SIZE=2>> > config.announcement=inline</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # optional parameter: announce_path=<path></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets the path where announce files are searched for</FONT>
<BR><FONT SIZE=2>> > announce_path=/usr/local/lib/sems/audio/</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # parameter: default_announce=<filename></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets the name of the default announce WAV file</FONT>
<BR><FONT SIZE=2>> > default_announce=default.wav</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # end of configuration section for announcement module</FONT>
<BR><FONT SIZE=2>> > config.announcement=end</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # sample isdngw module configuration (external file)</FONT>
<BR><FONT SIZE=2>> > # config.isdngw=/etc/isdngw.conf</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # sample ivr module configuration (inline)</FONT>
<BR><FONT SIZE=2>> > config.ivr=inline</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > #parameter: python_script_path=<full path></FONT>
<BR><FONT SIZE=2>> > python_script_path=/etc/ivr</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > #parameter: python_script_file=<filename></FONT>
<BR><FONT SIZE=2>> > python_script_file=example.py</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # end of configuration section for ivr module</FONT>
<BR><FONT SIZE=2>> > config.ivr=end</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # sample conference configuration (inline)</FONT>
<BR><FONT SIZE=2>> > config.conference=inline</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # parameter: default_announce=<filename></FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # - sets the full pathed name of the default announce WAV file.</FONT>
<BR><FONT SIZE=2>> > # Will be played to lonely users.</FONT>
<BR><FONT SIZE=2>> > default_announce=/usr/local/lib/sems/audio/first_participant.wav</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # end of configuration section for conference module</FONT>
<BR><FONT SIZE=2>> > config.conference=end</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # example configuration for number reader</FONT>
<BR><FONT SIZE=2>> > config.number_reader=inline</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > number_path=/usr/local/lib/sems/audio/</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > prolog_file=/usr/local/lib/sems/audio/welcome_to_number_reader.wav</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > epilog_file=/usr/local/lib/sems/audio/thanks_calling_number_reader.wav</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # end of number_reader configuration</FONT>
<BR><FONT SIZE=2>> > config.number_reader=end</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > # add more module configurations here (inline or external):</FONT>
<BR><FONT SIZE=2>> > #</FONT>
<BR><FONT SIZE=2>> > # config.mymodule=<filename></FONT>
<BR><FONT SIZE=2>> > # or</FONT>
<BR><FONT SIZE=2>> > # config.mymodule=inline</FONT>
<BR><FONT SIZE=2>> > # ...</FONT>
<BR><FONT SIZE=2>> > # config.mymodule=end</FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > * Joao Sampaio <est-j-sampaio@ptinovacao.pt> [040126 15:43]:</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > Hello,</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > I'm trying to install sems so that I can configure my ser proxy to support</FONT>
<BR><FONT SIZE=2>> > > voicemail functions.</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > I have downloaded the last CVS version of sems and I'm currently running</FONT>
<BR><FONT SIZE=2>> > ser</FONT>
<BR><FONT SIZE=2>> > > version 0.8.12</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > I got these error every time I try to start sems:</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > Sems[12051]: Warning: /etc/sems/sems.conf:59 configuration: ignoring</FONT>
<BR><FONT SIZE=2>> > > unknown parameter announce_path </FONT>
<BR><FONT SIZE=2>> > > Sems[12051]: Warning: /etc/sems/sems.conf:64 configuration: ignoring</FONT>
<BR><FONT SIZE=2>> > > unknown parameter default_announce </FONT>
<BR><FONT SIZE=2>> > > Sems[12051]: Warning: /etc/sems/sems.conf:69 configuration: ignoring</FONT>
<BR><FONT SIZE=2>> > > unknown parameter max_record </FONT>
<BR><FONT SIZE=2>> > > Sems[12054]: Warning: no configuration found for module announcement,</FONT>
<BR><FONT SIZE=2>> > maybe</FONT>
<BR><FONT SIZE=2>> > > you want to specify config.announcement in config file. </FONT>
<BR><FONT SIZE=2>> > > Sems[12054]: Error: while loading plug-in</FONT>
<BR><FONT SIZE=2>> > > '/usr/local/lib/sems/plug-in/apps/announcement.so' </FONT>
<BR><FONT SIZE=2>> > > Sems[12053]: Warning: signal 17 received </FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > Another question: Is ser 0.8.12 compatible with the last version of sems</FONT>
<BR><FONT SIZE=2>> > in</FONT>
<BR><FONT SIZE=2>> > > CVS?</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > Thank you very much.</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > Best reagards,</FONT>
<BR><FONT SIZE=2>> > > _______________________</FONT>
<BR><FONT SIZE=2>> > > Jo?o Sampaio</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > PT Inova??o, SA</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > SRM - Servi?os e Redes M?veis</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > > email: est-j-sampaio@ptinovacao.pt</FONT>
<BR><FONT SIZE=2>> > > Tlf: +351 234511160-1907 / +351 234403421</FONT>
<BR><FONT SIZE=2>> > > </FONT>
<BR><FONT SIZE=2>> > </FONT>
<BR><FONT SIZE=2>> > > _______________________________________________</FONT>
<BR><FONT SIZE=2>> > > Serusers mailing list</FONT>
<BR><FONT SIZE=2>> > > serusers@lists.iptel.org</FONT>
<BR><FONT SIZE=2>> > > <A HREF="http://lists.iptel.org/mailman/listinfo/serusers" TARGET="_blank">http://lists.iptel.org/mailman/listinfo/serusers</A></FONT>
<BR><FONT SIZE=2>> </FONT>
<BR><FONT SIZE=2>> _______________________________________________</FONT>
<BR><FONT SIZE=2>> Serusers mailing list</FONT>
<BR><FONT SIZE=2>> serusers@lists.iptel.org</FONT>
<BR><FONT SIZE=2>> <A HREF="http://lists.iptel.org/mailman/listinfo/serusers" TARGET="_blank">http://lists.iptel.org/mailman/listinfo/serusers</A></FONT>
<BR><FONT SIZE=2>> </FONT>
</P>
</BODY>
</HTML>