<html><head><!-- ViewCVS -- http://viewcvs.sourceforge.net/
by Greg Stein -- mailto:gstein@lyra.org
--><title>ser/sip_router/etc/nathelper.cfg - view - 1.1.2.1</title>
<link rel="stylesheet" href="nathelper.cfg_files/style.htm" type="text/css"></head><body bgcolor="#eeeeee">
<table width="100%" border="0" cellspacing="0" cellpadding="1" bgcolor="#ffffcc">
<tbody><tr valign="bottom">
<td>
<a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/nathelper.cfg#rev1.1.2.1">
<img src="nathelper.cfg_files/back.gif" alt="(file)" border="0" width="16" height="16">
</a>
<b>Return to
<a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/nathelper.cfg#rev1.1.2.1">nathelper.cfg</a>
CVS log</b>
<img src="nathelper.cfg_files/text.gif" alt="(file)" border="0" width="16" height="16">
</td>
<td align="right">
<img src="nathelper.cfg_files/dir.gif" alt="(dir)" border="0" width="16" height="16">
<b>Up to <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/#dirlist">[Development]</a> / <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/#dirlist">ser</a> / <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/#dirlist">sip_router</a> / <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/#dirlist">etc</a></b>
</td>
</tr>
</tbody></table>
<hr noshade="noshade">
<table width="100%"><tbody><tr><td bgcolor="#ffffff">
File: <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/#dirlist">[Development]</a> / <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/#dirlist">ser</a> / <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/#dirlist">sip_router</a> / <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/#dirlist">etc</a> / <a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/nathelper.cfg#dirlist">nathelper.cfg</a>
(<a href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/*checkout*/ser/sip_router/etc/nathelper.cfg?rev=1.1.2.1" target="cvs_checkout" onclick="window.open('about:blank','cvs_checkout',
'resizeable=1,scrollbars=1');"><b>download</b></a>)
<br>
Revision: <b>1.1.2.1</b>,
<i>Mon Nov 24 14:47:18 2003 UTC</i> (11 months ago) by <i>janakj</i>
<br>Branch: <b>rel_0_8_12</b>
<br>CVS Tags: <b>v_0_8_14, v0_8_14_rc2, v0_8_14_rc1, rel_0_8_14_r0,
rel_0_8_14, fixes_merged_to_HEAD, before_usrloc_changes,
before_radius_modules_merge, before_nathelper_merge</b>
<br>Changes since <b>1.1: +1 -1 lines</b>
<pre>- nathelper configuration example added
</pre>
</td></tr></tbody></table>
<hr noshade="noshade">
<pre>#
# $Id: nathelper.cfg,v 1.1.2.1 2003/11/24 14:47:18 janakj Exp $
#
# simple quick-start config script including nathelper support
# This default script includes nathelper support. To make it work
# you will also have to install Maxim's RTP proxy. The proxy is enforced
# if one of the parties is behind a NAT.
#
# If you have an endpoing in the public internet which is known to
# support symmetric RTP (Cisco PSTN gateway or voicemail, for example),
# then you don't have to force RTP proxy. If you don't want to enforce
# RTP proxy for some destinations than simply use t_relay() instead of
# route(1)
#
# Sections marked with !! Nathelper contain modifications for nathelper
#
# NOTE !! This config is EXPERIMENTAL !
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# !! Nathelper
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# !! Nathelper
modparam("registrar", "nat_flag", 6)
modparam("nathelper", "natping_interval", 30) # Ping interval 30 s
modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# !! Nathelper
# Special handling for NATed clients; first, NAT test is
# executed: it looks for via!=received and RFC1918 addresses
# in Contact (may fail if line-folding is used); also,
# the received test should, if completed, should check all
# vias for rpesence of received
if (nat_uac_test("3")) {
# Allow RR-ed requests, as these may indicate that
# a NAT-enabled proxy takes care of it; unless it is
# a REGISTER
if (method == "REGISTER" || ! search("^Record-Route:")) {
log("LOG: Someone trying to register from private IP, rewriting\n");
# This will work only for user agents that support symmetric
# communication. We tested quite many of them and majority is
# smart enough to be symmetric. In some phones it takes a configuration
# option. With Cisco 7960, it is called NAT_Enable=Yes, with kphone it is
# called "symmetric media" and "symmetric signalling".
fix_nated_contact(); # Rewrite contact with source IP of signalling
if (method == "INVITE") {
fix_nated_sdp("1"); # Add direction=active to SDP
};
force_rport(); # Add rport parameter to topmost Via
setflag(6); # Mark as NATed
};
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
# if (!www_authorize("iptel.org", "subscriber")) {
# www_challenge("iptel.org", "0");
# break;
# };
save("location");
break;
};
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n");
route(1);
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# !! Nathelper
if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)" && !search("^Route:")){
sl_send_reply("479", "We don't forward to private IP addresses");
break;
};
# if client or server know to be behind a NAT, enable relay
if (isflagset(6)) {
force_rtp_proxy();
};
# NAT processing of replies; apply to all transactions (for example,
# re-INVITEs from public to private UA are hard to identify as
# NATed at the moment of request processing); look at replies
t_on_reply("1");
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}
# !! Nathelper
onreply_route[1] {
# NATed transaction ?
if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
fix_nated_contact();
force_rtp_proxy();
# otherwise, is it a transaction behind a NAT and we did not
# know at time of request processing ? (RFC1918 contacts)
} else if (nat_uac_test("1")) {
fix_nated_contact();
};
}
</pre>
<hr noshade="noshade">
<table width="100%" border="0" cellpadding="0" cellspacing="0"><tbody><tr>
<td align="left"><address><a href="http://www.berlios.de/">Back to BerliOS</a></address></td>
<td align="right">
Powered by<br><a href="http://viewcvs.sourceforge.net/">ViewCVS 0.9.2</a>
</td></tr></tbody></table>
</body></html>