[root@ root]# dmesg Linux version 2.4.20-8 (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 200 30222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ff74000 (usable) BIOS-e820: 000000000ff74000 - 000000000ff76000 (ACPI NVS) BIOS-e820: 000000000ff76000 - 000000000ff97000 (ACPI data) BIOS-e820: 000000000ff97000 - 0000000010000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65396 zone(0): 4096 pages. zone(1): 61300 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ Initializing CPU#0 Detected 2394.054 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4771.02 BogoMIPS Memory: 252460k/261584k available (1347k kernel code, 6700k reserved, 999k data, 132k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfba6a, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router default [8086/24d0] at 00:1f.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SER IAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 00:1f.1 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: IC35L060AVV207-0, ATA DISK drive blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff) hdc: Lite-On LTN486S 48x Max, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 78125000 sectors (40000 MB) w/1821KiB Cache, CHS=4863/255/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 146k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: ide0(3,2): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 4514353 ext3_orphan_cleanup: deleting unreferenced inode 213182 ext3_orphan_cleanup: deleting unreferenced inode 212978 ext3_orphan_cleanup: deleting unreferenced inode 212976 EXT3-fs: ide0(3,2): 4 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 132k freed EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 522104k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2002 Netfilter core team IA-32 Microcode Update Driver: v1.11 microcode: CPU0 no microcode found! (sig=f29, pflags=4) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected Intel(R) PRO/1000 Network Driver - version 4.4.19-k1 Copyright (c) 1999-2002 Intel Corporation. divert: allocating divert_blk for eth0 eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 100 Mbps Full Duplex HST Saphir: using configurationfile /etc/saphir.ini HST Saphir: +--------------------------------------------------+ HST Saphir: | HST Saphir V PCI S2M ISDN-Adapter | HST Saphir: +--------------------------------------------------+ HST Saphir: | CAPI-Driver V 2.7 (rev.02)-115 Q.921/DSS1 | HST Saphir: | CAPI-Specification V 1.1 Profil A 07.09.1990 | HST Saphir: | CAPI-Specification V 2.0 4th Edition June 2001 | HST Saphir: | CCITT V.110 support | HST Saphir: | ISO 8208 and CCITT T.90 support | HST Saphir: | CCITT X.31 LAPD support | HST Saphir: | CCITT V.120 support | HST Saphir: | CCITT T.30 support | HST Saphir: | CCITT V.42bis support | HST Saphir: | Software & Protocols HST GmbH (c) 1993-2003 | HST Saphir: +--------------------------------------------------+ HST Saphir: enabled 110a 2101, mem fe9cef00, fe9d0000, 0, 0, irq 10 HST Saphir controller 1: receive frame alignment established capifs: Rev 1.1.4.1 capi20: started up with major 68 HST Saphir: modules capi20 attaches to CAPI capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 mice: PS/2 mouse device common for all mice ide-floppy driver 0.99.newide hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded CAPI-driver Rev 1.1.4.1: loaded kcapi: capidrv attached kcapi: appl 1 up capidrv: Rev 1.1.4.1: loaded [root@ root]#