<div>Hello, all:</div>
<div> </div>
<div> I am using SER interworking with Cisco26 as PSTN gateway. So far, everything goes OK but the Radius billing. There is only STOP Radius request with no START Radius request at first. I think it's due to 183 with SDP issue. But it seems early_media in ACC module didn't give it a remedy.
</div>
<div> </div>
<div> BTW, START/STOP runs OK in intra-domain call..which including 180 without SDP in signaling loop.</div>
<div> </div>
<div> My ser.cfg is as below:</div>
<div> </div>
<div> modparam("acc", "log_level",1)</div>
<div> modparam("acc","radius_flag",1)</div>
<div> modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf")</div>
<div> </div>
<div> modparam("acc",report_ack",0)</div>
<div> modparam("acc",early_media",1)</div>
<div> </div>
<div> # failed_transaction,report_cancels,radius_missed_flag...[uncommented]</div>
<div> </div>
<div> </div>
<div> Who can rescue me? </div>
<div> </div>
<div>Thanks.</div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>