Hi<br>thank you!, now i am using Openser, it was easy to move from ser, just some minor changes like 'break' to 'return' etc, my nathelper implementation is based on a ser example and it works very well, just made some minor changes to set flag 6 and flag 7 to 'Register' and 'Invites' when 'nat_uac_test("19")' in order to try Tavis code snippet, in my tests there is no audio when reset flag 6 and 7 after detected the two clients behind the same NAT and can't hungup or cancel calls properly, please someone see my cfg attached and send some advice, what I am missing?
<br><br>thanks<br>rafael<br><br><br><br><div><span class="gmail_quote">On 12/7/05, <b class="gmail_sendername">Norman Brandinger</b> <<a href="mailto:norm@goes.com">norm@goes.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi Rafael,<br><br>You would use the "example code snippet" when you want to decide whether<br>or not to use rtpproxy or mediaproxy based on the fact that both the<br>caller and the callee are behind the same NAT device. Please review the
<br>mailing lists as this topic has been discussed many times.<br><br>I added some additional comments in regard to the setting of flags 2 and<br>3 in the posted example at:<br><a href="http://openser.org/dokuwiki/doku.php?id=avp_examples">
http://openser.org/dokuwiki/doku.php?id=avp_examples</a><br><br>Generally, I have found that if OpenSER fails to start with an error<br>indicating that the function can't be found, it's time to find the<br>correct module to add.
<br><br>In response to your last question "etc." I suggest that you review the<br>three web sites: <a href="http://openser.org">openser.org</a>, <a href="http://iptel.org">iptel.org</a> and <a href="http://onsip.org">
onsip.org</a>. The last one has<br>some really great material that explains alot.<br><br>Regards,<br>Norm<br><br><br>Rafael R. GV wrote:<br>> Hi<br>> I am using nathelper/rtpproxy in ser , please see my ser.cfg attached
<br>> and tell me where do I have to use this code snippet? where did you<br>> set flags 2 and 3?, what other modules I need?, etc.<br>><br>> thank you<br>> Rafael<br>> Lima-Peru<br>><br><br></blockquote>
</div><br>