<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I have no experience using sip-proxy and I'm not sure I understand why
you need it. As far as I can see, SER is behaving as it should: Use
Vias in replies within the same transactions, and use route headers to
loose route to next hop for requests within a dialog.<br>
My advice is fix your sip-proxy and see where it takes you.<br>
g-)<br>
<br>
ravi reddy wrote:
<blockquote
cite="midcfbb389b0609070037h18a86a2by6cce166c261b3557@mail.gmail.com"
type="cite">
<div>Hi Greger,</div>
<div> </div>
<div> I found the exact problem which have been paining
me.</div>
<div> </div>
<div>1) the nated Sip-proxy;</div>
<div> </div>
<div>its sending the route headers as if it forgets it staying behind
the Nat.and sending the call as </div>
<div>some thing like this </div>
<div>invite <a href="mailto:99106883@81.21.33.35">99106883@81.21.33.35</a>
----this is my SER - server</div>
<div>record<<a href="http://192.168.1.100">192.168.1.100</a>>-------
this is nated sip-proxy address</div>
<div>contact<<a href="http://192.168.1.100">192.168.1.100</a>>-----contact
to this address only</div>
<div> </div>
<div> </div>
<div>SER-server is frowarding the call to pstn Gateway as it recieves
and just rewriting the host name.</div>
<div> </div>
<div> </div>
<div> </div>
<div>and the other problem(I think)</div>
<div> </div>
<div>2) PSTN Gateway.</div>
<div>even when call connects it is adding the strict route headers as
it recieves from SER-server</div>
<div>and when it sends 200 0k after connecting the call </div>
<div> </div>
<div>it is not getting back or SER-server is also not getting back
the "ACK" from the nated proxy</div>
<div> </div>
<div>because the nated proxy itself add the contact header as
(private-ip ) ofcourse it is following strictly the SIP-PROTOCOL</div>
<div> </div>
<div>so,these are the two problems i found ,</div>
<div> </div>
<div> Some providers are providing calls to this nated sip-proxy
-------> How ????</div>
<div> </div>
<div>Why the SER-server is also not following the path where "INVITE"
message came ?????</div>
<div> </div>
<div>How to stop the Nated Sip-proxy to stop sending the headers in
"INVITE"message not including the record route or contact headers in
the message --- ??????</div>
<div> </div>
<div>Or is there any way to do in SER-server itself ( majorly
prefered) not to contact private ip-address and to follow the next
address which is NAT-IP ---???????</div>
<div> </div>
<div>(I think its foolish question )---> Or is there any way to
get registered another sip-proxy in location database.----???????</div>
<div> </div>
<div>Please suggest me some thing to get out of this problem.</div>
<div> </div>
<div> Thank You.</div>
<div> </div>
<div>Regards,</div>
<div>Ravi.</div>
</blockquote>
</body>
</html>