<div>Hi Greger,</div>
<div> </div>
<div>Thanks for replying and your help. I was able to solve the issue. But now the call forward on no answer and busy are failing due to a different reason. I get the following error message on the /var/log/messages</div>
<div> </div>
<div>May 17 15:22:54 localhost /usr/local/sbin/ser[28719]: ERROR: t_forward_nonack: no branched for forwarding <br>May 17 15:22:54 localhost /usr/local/sbin/ser[28719]: ERROR: w_t_relay (failure mode): forwarding failed
<br>May 17 15:22:54 localhost /usr/local/sbin/ser[28719]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL)</div>
<div> </div>
<div>I observed in one of the mailing list that the solution for this problem is to change the uri to the new, then append_branch. Any suggestions on how to do this? Please point me to the change that is needed to solve this issue. Here's the chunk of code for your reference from my
ser.cfg:</div>
<div> </div>
<div><font size="2">
<p># -----------------------------------------------------------------</p>
<p># INVITE Message Handler</p>
<p># -----------------------------------------------------------------</p>
<p>if (client_nat_test("3")) {</p>
<p>setflag(7);</p>
<p>force_rport();</p>
<p>fix_nated_contact();</p>
<p>};</p>
<p>if (!allow_trusted()) {</p>
<p>if (!proxy_authorize("","subscriber")) {</p>
<p>proxy_challenge("","0");</p>
<p>break;</p>
<p>} else if (!check_from()) {</p>
<p>sl_send_reply("403", "Use From=ID");</p>
<p>break;</p>
<p>};</p>
<p>consume_credentials();</p>
<p>};</p>
<p>if (uri=~"^sip:1[0-9]{10}@") {</p>
<p>strip(1);</p>
<p>};</p>
<p>lookup("aliases");</p>
<p>if (!is_uri_host_local()) {</p>
<p>route(4);</p>
<p>route(1);</p>
<p>break;</p>
<p>};</p>
<p>if (uri=~"^sip:011[0-9]*@") {</p>
<p>route(4);</p>
<p>route(5);</p>
<p>break;</p>
<p>};</p>
<p>if (avp_db_load("$ruri/username", "s:callfwd")) {</p>
<p>setflag(22);</p>
<p>avp_pushto("$ruri", "s:callfwd");</p>
<p>route(6);</p>
<p>break;</p>
<p>};</p>
<p>if (!lookup("location")) {</p>
<p>if (uri=~"^sip:[0-9]{10}@") {</p>
<p>route(4);</p>
<p>route(5);</p>
<p>break;</p>
<p>};</p>
<p>sl_send_reply("404", "User Not Found");</p>
<p>break;</p>
<p>};</p>
<p>if (avp_db_load("$ruri/username", "s:fwdbusy")) {</p>
<p>if (!avp_check("s:fwdbusy", "eq/$ruri/i")) {</p>
<p>setflag(26);</p>
<p>};</p>
<p>};</p>
<p>if (avp_db_load("$ruri/username", "s:fwdnoanswer")) {</p>
<p>if (!avp_check("s:fwdnoanswer", "eq/$ruri/i")) {</p>
<p>setflag(27);</p>
<p>};</p>
<p>};</p>
<p>t_on_failure("1");</p>
<p>route(4);</p>
<p>route(1);</p>
<p>}</p>
<p>route[4] {</p>
<p># -----------------------------------------------------------------</p>
<p># NAT Traversal Section</p>
<p># -----------------------------------------------------------------</p>
<p>if (isflagset(6) || isflagset(7)) {</p>
<p>if (!isflagset(8)) {</p>
<p>setflag(8);</p>
<p>use_media_proxy();</p>
<p>};</p>
<p>};</p>
<p>}</p>
<p>route[5] {</p>
<p># -----------------------------------------------------------------</p>
<p># PSTN Handler</p>
<p># -----------------------------------------------------------------</p>
<p>rewritehost("<a href="http://192.0.2.245">192.0.2.245</a>"); # INSERT YOUR PSTN GATEWAY IP ADDRESS</p>
<p>avp_write("i:45", "inv_timeout");</p>
<p>t_on_failure("1");</p>
<p>route(1);</p>
<p>}</p>
<p>route[6] {</p>
<p># ------------------------------------------------------------------------</p>
<p># Call Forwarding Reply Route Handler</p>
<p>#</p>
<p># This must be done as a route block because sl_send_reply() cannot be</p>
<p># called from the failure_route block</p>
<p># ------------------------------------------------------------------------</p>
<p>if (uri=~"^sip:1[0-9]{10}@") {</p>
<p>strip(1);</p>
<p>};</p>
<p>lookup("aliases");</p>
<p>if (!is_uri_host_local()) {</p>
<p>if (!isflagset(22)) {</p>
<p>append_branch();</p>
<p>};</p>
<p>route(4);</p>
<p>route(1);</p>
<p>break;</p>
<p>};</p>
<p>if (uri=~"^sip:011[0-9]*@") {</p>
<p>route(4);</p>
<p>route(5);</p>
<p>break;</p>
<p>};</p>
<p>if (!lookup("location")) {</p>
<p>if (uri=~"^sip:[0-9]{10}@") {</p>
<p>route(4);</p>
<p>route(1);</p>
<p>break;</p>
<p>};</p>
<p>sl_send_reply("404", "User Not Found");</p>
<p>};</p>
<p>route(4);</p>
<p>route(1);</p>
<p>}</p>
<p>onreply_route[1] {</p>
<p>if ((isflagset(6) || isflagset(7)) && </p>
<p>(status=~"(180)|(183)|2[0-9][0-9]")) {</p>
<p>if (!search("^Content-Length:[ ]*0")) {</p>
<p>use_media_proxy();</p>
<p>};</p>
<p>};</p>
<p>if (client_nat_test("1")) {</p>
<p>fix_nated_contact();</p>
<p>};</p>
<p>}</p>
<p>failure_route[1] {</p>
<p>if (t_check_status("487")) {</p>
<p>break;</p>
<p>};</p>
<p>if (isflagset(26) && t_check_status("486")) {</p>
<p>if (avp_pushto("$ruri", "s:fwdbusy")) {</p>
<p>avp_delete("s:fwdbusy");</p>
<p>resetflag(26);</p>
<p>route(6);</p>
<p>break;</p>
<p>};</p>
<p>};</p>
<p>if (isflagset(27) && t_check_status("408")) {</p>
<p>if (avp_pushto("$ruri", "s:fwdnoanswer")) {</p>
<p>avp_delete("s:fwdnoanswer");</p>
<p>resetflag(27);</p>
<p>route(6);</p>
<p>break;</p>
<p>};</p>
<p>};</p>
<p>end_media_session();</p>
<p>}</p></font></div>
<div>Thanks again,</div>
<div>Ranganath B</div>
<div> </div>
<div><br> </div>
<div><span class="gmail_quote">On 5/17/07, <b class="gmail_sendername">Greger Viken Teigre</b> <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:greger@teigre.com" target="_blank">greger@teigre.com
</a>> wrote:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Well, <a onclick="return top.js.OpenExtLink(window,event,this)" href="http://ser.iptel.org/" target="_blank">
ser.iptel.org</a> does not exist in dns, so that's a uri that fails. Try a working uri. <br>g-)<br><br>------- Original message -------<br>From: Ranganath B <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:ranganath.b@gmail.com" target="_blank">
ranganath.b@gmail.com</a>><br>Sent: 16.5.'07, 19:42<br><br>> Hi,<br>><br>> I could get the blind (unconditional) call forward option working with the configuration that is provided in the IPTEL website but using the same config file
<br>and the ideas provided I couldn't get the call forward on busy and no answer working. I get the following error in the /var/log/messages:<br>><br>> May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: mk_proxy: could not resolve hostname: "
<a onclick="return top.js.OpenExtLink(window,event,this)" href="http://ser.iptel.org/" target="_blank">ser.iptel.org</a>"<br>> May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: uri2proxy: bad host name in URI <
<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:sip:1234@ser.iptel.org" target="_blank">sip:1234@ser.iptel.org </a>><br>> May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: t_forward_nonack: failure to add branches
<br>> May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: w_t_relay (failure mode): forwarding failed <br>> May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy
<br>> May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) <br>><br>> It would be of great help if anybody provide me input on how to resolve this issue or a configuration file using which I can get the call forward on busy and
<br>no response working. BTW, I am using the ser verison: 0.9.6 . I have populated an entry for call forward no answer/busy in the mysql database for the table<br>"usr_preferences". Thanks in advance.<br>><br>
> Regards,<br>> Ranganath B<br><br></blockquote></div><br>