<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
usrloc-cl is a cacheless version of usrloc module, i.e. nothing is
stored in memory. I believe Martin Hoffmann took over maintenance of
it, but I'm not sure about the status on 2.0.0. If your edge proxy
uses usrloc-cl instead of usrloc, it will pull locations to ping from
the DB instead of from memory.<br>
g-)<br>
<br>
Tomasz Zieleniewski wrote:
<blockquote
cite="mid:5fd52d7a0711270104y13914544p55fa55dee3379068@mail.gmail.com"
type="cite">
<pre wrap="">what is usrloc-cl??
What do you mean by that and how can I do that?
-tomasz
On Nov 27, 2007 8:58 AM, Greger V. Teigre <a class="moz-txt-link-rfc2396E" href="mailto:greger@teigre.com"><greger@teigre.com></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap=""> You use usrloc-cl?
If not, unless you replicate, the non-REGISTER handling server will not
have the usrloc in memory.
g-)
Tomasz Zieleniewski wrote:
Hi Jiri,
On Nov 25, 2007 10:08 PM, Jiri Kuthan <a class="moz-txt-link-rfc2396E" href="mailto:jiri@iptel.org"><jiri@iptel.org></a> wrote:
At 10:56 25/11/2007, Tomasz Zieleniewski wrote:
Hi,
I don't have those lines because I have a registrar on seperate SIP Proxy.
This proxy here is the boundary one, but they both use the same database
and have access to location table common.
Well, I'm not sure I'm getting the context of this configuration so I don't
feel certain with providing some hints (in particular two proxy serveer
in a series both using usrloc seems unusual to me). A hand-waving estimate
is you need to configure the "boundary proxy" to change all natted clients
to form "as seen by the network" and the "actual proxy" to send pings to
all contacts.
Boundary proxy uses usrloc only for the purpose of pinging the natted
users.
Nathelper module requires usrloc. Because all reuqest travels 'boundary
proxy'
before entering network the 'boundary proxy' must ping users to keep
my nat bindings
right. they are both on seperate machines.
-tomek
-jiri
-tomasz
On Nov 25, 2007 10:40 AM, Jiri Kuthan <a class="moz-txt-link-rfc2396E" href="mailto:jiri@iptel.org"><jiri@iptel.org></a> wrote:
Hi Tomasz,
well it could be that reusing an existing config and commiting than your
specific
changes to it would save you quite some laborous exercises rather than
writing
it from scratch....
<a class="moz-txt-link-freetext" href="http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/ser-oob.cfg?rev=1.1.2.1&content-type=text/plain">http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/ser-oob.cfg?rev=1.1.2.1&content-type=text/plain</a>
The lines in question are (out of which I think you are missing the
registrar params)
FLAG_NAT : 3, # the UAC is behind a NAT
...
# identify natted contacts using a flag
modparam("registrar", "load_nat_flag", "FLAG_NAT")
modparam("registrar", "save_nat_flag", "FLAG_NAT")
...
modparam("rr", "cookie_filter", "(account|uac_nat)")
...
modparam("nathelper", "ping_nated_only", 1 )
# if this option is not set, simple 4-bytes ping is sent
modparam("nathelper", "natping_method", "OPTIONS" )
#temporary statefull natping test (only in future versions)
#modparam("nathelper", "natping_stateful", 1)
...
setflag(FLAG_NAT);
-jiri
At 22:20 24/11/2007, Tomasz Zieleniewski wrote:
I'm sorry for the CC
here is my config:
debug=3 # debug level (cmd line: -dddddddddd)
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
fork=yes
log_stderror=no
check_via=yes # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
tls_port_no=5061
children=4
user=ser
group=ser
mhomed=yes
disable_tcp=no
tcp_accept_aliases=yes
enable_tls=no
sip_warning=0
reply_to_via=no
alias="voip.touk.pl"
dns_retr_time=1
dns_retr_no=1
dns_servers_no=1
dns_use_search_list=no
dns_try_ipv6=no
# dns cache & failover
use_dns_cache=on
use_dns_failover=on
# dns_cache_flags=0
dns_cache_negative_ttl=300
dns_cache_min_ttl=60
dns_cache_max_ttl=86400 # 1 day
dns_cache_mem=2048 # 2 MB
dns_cache_gc_interval=60
tcp_connection_lifetime=3600
tcp_max_connections=2048
tcp_connect_timeout=1
loadmodule ...
....
# specify the path to you database here
modparam("acc_db|auth_db|avp_db|domain|gflags|usrloc|uri_db|speeddial|msilo|lcr",
"db_url", "mysql://ser:ser@localhost/ser")
# -- usrloc params --
modparam("usrloc", "db_mode", 1)
# -- registrar params --
modparam("registrar", "default_expires", 300)
modparam("registrar", "min_expires", 60)
modparam("registrar", "max_expires", 300)
modparam("registrar", "append_branches", 1)
modparam("registrar", "received_param", "rcv")
modparam("registrar", "max_contacts", 2)
# -- auth params --
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
# -- rr params --
modparam("rr", "enable_full_lr", 1)
modparam("rr", "cookie_filter", "uac_nat")
modparam("rr", "cookie_secret", "secret")
modparam("rr", "user_part_avp", "route_user")
modparam("rr", "next_route_avp", "route_next")
# -- gflags params --
modparam("gflags", "load_global_attrs", 1)
# -- domain params --
modparam("domain", "load_domain_attrs", 1)
# -- ctl params --
modparam("ctl", "binrpc", "unixs:/tmp/ser-bsp_ctl")
modparam("ctl", "fifo", "fifo:/tmp/ser-bsp_fifo")
# modparam("ctl", "binrpc", "tcp:localhost:2046")
modparam("ctl", "mode", 0777)
# -- tm params --
modparam("tm", "restart_fr_on_each_reply", 1)
# -- auth_radius params --
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient-ng/radiusclient.conf")
modparam("auth_radius", "service_type", 15)
# -- options params --
modparam("options", "accept", "*/*")
modparam("options", "accept_encoding", "")
modparam("options", "accept_language", "en")
# -- ratelimit params --
modparam("ratelimit","timer_interval", 10)
modparam("ratelimit","invite_limit", 100)
modparam("ratelimit","register_limit", 100)
modparam("ratelimit","subscribe_limit", 100)
# -- xmlrpc params --
modparam("xmlrpc", "route","RPC")
# -- nathelper params --
modparam("nathelper", "natping_interval", 20)
modparam("nathelper", "ping_nated_only", 0)
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper", "tcpping_crlf", 1)
# -- tls params --
modparam("tls", "config", "/home/ser/ser/ca/tls-bsp.cfg")
modparam("tls", "tls_force_run", 0)
modparam("tls", "tls_log",3)
modparam("tls", "handshake_timeout", 10)
modparam("tls", "send_timeout", 10)
modparam("tls", "tls_disable_compression", 0)
#modparam("tls", "private_key", "/etc/certs/key.pem")
#modparam("tls", "certificate", "/etc/certs/cert.pem")
#modparam("tls", "ca_list", "/etc/certs/ca_list.pem")
#modparam("tls", "require_certificate", 0)
#modparam("tls", "verify_certificate", 1)
#modparam("tls", "tls_method", "TLSv1")
route{
...
}
On Nov 24, 2007 9:35 PM, Atle Samuelsen <a class="moz-txt-link-rfc2396E" href="mailto:clona@cyberhouse.no"><clona@cyberhouse.no></a> wrote:
Hi,
Always CC the list.
then I dont know.. post your full config so people can see if they see
something
-A
* Tomasz Zieleniewski <a class="moz-txt-link-rfc2396E" href="mailto:tzieleniewski@gmail.com"><tzieleniewski@gmail.com></a> [071124 20:38]:
Hi,
I had that parameter set to 0, but still no udp packets...
On Nov 24, 2007 6:43 PM, Atle Samuelsen <a class="moz-txt-link-rfc2396E" href="mailto:clona@cyberhouse.no"><clona@cyberhouse.no></a> wrote:
* Tomasz Zieleniewski <a class="moz-txt-link-rfc2396E" href="mailto:tzieleniewski@gmail.com"><tzieleniewski@gmail.com></a> [071124 16:50]:
HI,
I have the following nathelper settings:
modparam("nathelper", "natping_interval", 20)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper", "tcpping_crlf", 1)
But i cant see any udp packets being sent to registered users.
Please point me what did I miss.
Hi,
without seeing any more of your config, I'm guessing that you do not set
the natflag, so if you change ping_nated_only to 0, I think you will see
some udp packets.
- Atle
(shot in the whild world of sip)
Best
Tomasz
_______________________________________________
Serusers mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Serusers@lists.iptel.org">Serusers@lists.iptel.org</a>
<a class="moz-txt-link-freetext" href="http://lists.iptel.org/mailman/listinfo/serusers">http://lists.iptel.org/mailman/listinfo/serusers</a>
_______________________________________________
Serusers mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Serusers@lists.iptel.org">Serusers@lists.iptel.org</a>
<a class="moz-txt-link-freetext" href="http://lists.iptel.org/mailman/listinfo/serusers">http://lists.iptel.org/mailman/listinfo/serusers</a>
--
Jiri Kuthan <a class="moz-txt-link-freetext" href="http://iptel.org/~jiri/">http://iptel.org/~jiri/</a>
_______________________________________________
Serusers mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Serusers@lists.iptel.org">Serusers@lists.iptel.org</a>
<a class="moz-txt-link-freetext" href="http://lists.iptel.org/mailman/listinfo/serusers">http://lists.iptel.org/mailman/listinfo/serusers</a>
--
Jiri Kuthan <a class="moz-txt-link-freetext" href="http://iptel.org/~jiri/">http://iptel.org/~jiri/</a>
_______________________________________________
Serusers mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Serusers@lists.iptel.org">Serusers@lists.iptel.org</a>
<a class="moz-txt-link-freetext" href="http://lists.iptel.org/mailman/listinfo/serusers">http://lists.iptel.org/mailman/listinfo/serusers</a>
</pre>
</blockquote>
<pre wrap=""><!---->_______________________________________________
Serusers mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Serusers@lists.iptel.org">Serusers@lists.iptel.org</a>
<a class="moz-txt-link-freetext" href="http://lists.iptel.org/mailman/listinfo/serusers">http://lists.iptel.org/mailman/listinfo/serusers</a>
</pre>
</blockquote>
</body>
</html>