<div dir="ltr"><div>Hi,</div>
<div> </div>
<div>i tried to change the ds_probing_mode as well. it didn't do any good.</div>
<div>i need the probing mode to be set to 1 anyway.</div>
<div> </div>
<div>so,</div>
<div>any ideas?</div>
<div> </div>
<div>here is the cfg again:</div>
<div> </div>
<div>after the failure route i turn to this route</div>
<div> </div>
<div>"route[OSPRPLERR] {<br>xlog("$C(rg) SCRIPT : in OSPRPLERR $ru $C(xx)\n");<br>if($avp(OSPRPL)!=404) {<br> xlog("$C(rg) OSPRPL is $avp(OSPRPL)<strong> now disable destination</strong> $C(xx)\n");<br>
ds_mark_dst("AP");<br> xlog("$C(rg) <strong>after disabling destination</strong> $C(xx)\n");<br> }"</div>
<div> </div>
<div> </div>
<div>here is the log:</div>
<div><br>13(5760) ERROR: <script>: SCRIPT : in OSPRPLERR <a href="mailto:sip%3A36264529@10.10.21.29">sip:36264529@10.10.21.29</a><br>13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1264 a=17 n=if<br>
13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1259 a=26 n=xlog<br>13(5760) ERROR: <script>: OSPRPL is 408 <strong>now disable destination<br></strong>13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1260 a=26 n=ds_mark_dst<br>
13(5760) ERROR: *** cfgtrace: c=[/usr/local/etc/kamailio/kamailio.cfg] l=1261 a=26 n=xlog<br>13(5760) ERROR: <script>: <strong>after disabling destination</strong></div>
<div><br>now i check the dispatcher list status:</div>
<div> </div>
<div>kamctl fifo ds_list</div>
<div><br>SET:: 47<br> URI:: sip:10.10.21.20 flags=AX priority=25 attrs=OSP_B4<br> URI:: sip:10.10.21.22 flags=AX priority=25 attrs=OSP_B3<br> URI:: sip:10.10.21.23 flags=AX priority=25 attrs=OSP_B2<br>
URI:: sip:10.10.21.21 flags=AX priority=25 attrs=OSP_B1<br>SET:: 41<br> URI:: sip:10.10.21.29 flags=AX priority=25 attrs=OSP_A4<br> URI:: sip:10.10.21.27 flags=AX priority=25 attrs=OSP_A3<br> URI:: sip:10.10.21.25 flags=AX priority=25 attrs=OSP_A1<br>
URI:: sip:10.10.21.24 flags=AX priority=25 attrs=OSP_A2</div></div>