<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hello,<br>
<br>
I could not spot if you checked for presence of a firewall. If you
don't get any log message from kamailio, it is very likely the sip
traffic is blocked -- be aware that packet sniffers grab them from
the network before local firewall rules.<br>
<br>
You can also set log_stderror=yes and the log messages should be
printed to the terminal, in this way you don't care if syslog is
configured or not properly, just o be sure there are log messages.
Then you can get back to syslog.<br>
<br>
Cheers,<br>
Daniel<br>
<br>
<div class="moz-cite-prefix">On 5/29/12 12:55 PM, SamyGo wrote:<br>
</div>
<blockquote
cite="mid:CAJUJwtiKeFNbm7AHzSsbq3a1mpNyzJwvwc=nymWsc4CZMXoFbw@mail.gmail.com"
type="cite">Change the L_WARN to L_NOTICE that makes a difference
when you've different debug=x value.
<div>and yes you are right about the "-" in -/var/log/kamailio ,
it is really required to prevent kamailio from waiting on syslog
to print lines and then continue.</div>
<div><br>
<br>
<div class="gmail_quote">On Tue, May 29, 2012 at 3:52 PM, Faisal
Yousuf <span dir="ltr"><<a moz-do-not-send="true"
href="mailto:faisal.yousuf@gmail.com" target="_blank">faisal.yousuf@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
While I didnt restarted my syslog (as the config were there
from before) - but I did check after restarting syslog
<div>regarding using xlog - I have 3 xlog messages in my
route logic around Registration</div>
<div><br>
</div>
<div># handle registrations</div>
<div>
<div><span style="white-space:pre-wrap"> </span>xlog("L_WARN","Code
before Registrar");</div>
<div><span style="white-space:pre-wrap"> </span>route(REGISTRAR);</div>
<div><span style="white-space:pre-wrap"> </span>xlog("L_WARN","Code
after Registrar");</div>
<div><br>
</div>
<div>I also have a log message at the start of the route</div>
<div>xlog("L_WARN","Begin Routing");</div>
<div><br>
</div>
<div>regarding the hyphen I checked removing the hyphen
but based on my understanding from the link regarding
enabling logging the hyphen enables asynchronous logging</div>
<div><br>
</div>
<div>Anyhow even after all these I still dont see any
logs.</div>
<div><br>
</div>
<div>Regards,</div>
<div>Faisal</div>
<div>
<div class="h5">
<div><br>
</div>
<div><br>
<div class="gmail_quote">On Tue, May 29, 2012 at
3:33 PM, Charles Chance <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:charles.chance@sipcentric.com"
target="_blank">charles.chance@sipcentric.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0
0 .8ex;border-left:1px #ccc
solid;padding-left:1ex">
<div>
Hi Faisal,<br>
<br>
You say you added to syslog.conf: local1.*
-/var/log/kamailio<br>
<br>
Is that exactly how it appears? If so, I think
you need to remove the hyphen so it becomes:
local1.* /var/log/kamailio<br>
<br>
As Sammy said, don't forget to restart syslog.<br>
<br>
Regards,<br>
<br>
Charles
<div>
<div><br>
<br>
<br>
-----Original Message-----<br>
<b>From</b>: SamyGo <<a
moz-do-not-send="true"
href="mailto:SamyGo%20%3cgovoiper@gmail.com%3e"
target="_blank">govoiper@gmail.com</a>><br>
<b>Reply-To</b>: SIP Router - Kamailio
(OpenSER) and SIP Express Router (SER) -
Users Mailing List <<a
moz-do-not-send="true"
href="mailto:SIP%20Router%20-%20%22Kamailio%20%28OpenSER%29%20and%20SIP%20Express%20Router%20%28SER%29%20-%20Users%20Mailing%20List%22%20%3csr-users@lists.sip-router.org%3e"
target="_blank">sr-users@lists.sip-router.org</a>><br>
<b>To</b>: SIP Router - Kamailio (OpenSER)
and SIP Express Router (SER) - Users
Mailing List <<a moz-do-not-send="true"
href="mailto:SIP%20Router%20-%20%22Kamailio%20%28OpenSER%29%20and%20SIP%20Express%20Router%20%28SER%29%20-%20Users%20Mailing%20List%22%20%3csr-users@lists.sip-router.org%3e"
target="_blank">sr-users@lists.sip-router.org</a>><br>
<b>Subject</b>: Re: [SR-Users] Using
Sip-Router Logging & Register Problem
Problem<br>
<b>Date</b>: Tue, 29 May 2012 15:27:06
+0500<br>
<br>
Did you restart your syslog ? Add xlog
lines in yur config when you receive a
REGISTER request so that it actually
prints something out.
<br>
<br>
On Tue, May 29, 2012 at 3:23 PM, Faisal
Yousuf <<a moz-do-not-send="true"
href="mailto:faisal.yousuf@gmail.com"
target="_blank">faisal.yousuf@gmail.com</a>>
wrote:<br>
<blockquote> Hi Daniel/ Sammy ,
</blockquote>
<blockquote> I made the changes in config
as suggested (i.e. move the define
variables at the top of the file rather
then in the middle)
</blockquote>
<blockquote> Regarding setting debug=3
=> I am setting WITH_DEBUG in the
config file so based on processing of
this symbol I believe debug=4 is set.#
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> For the log facility in the
kamailio.cfg I have set the
option log_facility=LOG_LOCAL1
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> & in my syslog.cfg
(attached again) I have set the
following
</blockquote>
<blockquote> local1.* -/var/log/kamailio
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> but still I dont see any logs
in this location when I start kamailio
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> I can see the kamailio
process - (in total there are 19
processes here is the root process all
other are child processes of this
process)
</blockquote>
<blockquote> kamailio 3375 1 0 08:06
? 00:00:00
/usr/local/sbin/kamailio -P
/var/run/kamailio.pid -m 32 -M 4 -u
kamailio -g kamailio
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> I can also see kamailio
starting to listen on port 5060 port on
the local machine on both UDP & TCP
interfaces
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> I am using an xlite phone on
windows to attempt to register - on my
Kamailio VM (using UDP) I started a
tcpdump to see if I am receiving the
Register messages - I can see the
register packets coming to the Kamailio
hosts from the phone - but I dont see
any responses from Kamailio.
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> Also as there are no logs I
dont know what is going wrong.
</blockquote>
<blockquote> Regards,
</blockquote>
<blockquote> Faisal
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> On Tue, May 29, 2012 at 2:37
PM, SamyGo <<a moz-do-not-send="true"
href="mailto:govoiper@gmail.com"
target="_blank">govoiper@gmail.com</a>>
wrote:<br>
<blockquote> Hi Faisal, </blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
<br>
</blockquote>
</blockquote>
<blockquote>
<blockquote> You say you've seen packets
on kamailio but kamailio isn't
replying !! </blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
<br>
</blockquote>
</blockquote>
<blockquote>
<blockquote> 1- Please verify that yuor
kamailio is indeed started <b>[ps -ef
| grep kamailio]</b> </blockquote>
</blockquote>
<blockquote>
<blockquote> 2- Verify if kamailio is
actuallay listening on the same port
as you are sending pcakets to ! <b>[netstat
-pln|grep kamailio]</b> </blockquote>
</blockquote>
<blockquote>
<blockquote> 3- Verify if your kamailio
is using the same protocol as of your
client i.e TCP or UDP or TLS etc. </blockquote>
</blockquote>
<blockquote>
<blockquote> 4- instead of viewing the
file<i> /var/log/kamailio</i> see<i>
/var/log/messages </i>because you
haven't mentioned local7 as Log
facility in your config. </blockquote>
</blockquote>
<blockquote>
<blockquote> I don't see your syslog<b>.conf
</b> file in this mail! check that
file and follow <a
moz-do-not-send="true"
href="http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration"
target="_blank">the referenced link</a> completely.
</blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
<br>
</blockquote>
</blockquote>
<blockquote>
<blockquote> Also see your
configurations kamailio.cfg file and
use define tags from second line from
top onward i.e just after #!KAMAILIO.
</blockquote>
</blockquote>
<blockquote>
<blockquote> Try getting rid of the
comment line "<i>####### Defined
Values #########</i>" - in my
experience such comment before define
cause trouble with configurations. </blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
<br>
</blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
<br>
</blockquote>
</blockquote>
<blockquote>
<blockquote> See all these and then
reply with updates. </blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
<br>
</blockquote>
</blockquote>
<blockquote>
<blockquote> Regards, </blockquote>
</blockquote>
<blockquote>
<blockquote> Sammy G. </blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
</blockquote>
</blockquote>
<blockquote>
<blockquote> On Tue, May 29, 2012 at
2:18 PM, Daniel-Constantin Mierla <<a
moz-do-not-send="true"
href="mailto:miconda@gmail.com"
target="_blank">miconda@gmail.com</a>>
wrote: </blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote> Hello,<br>
<br>
you can set debug=3 in kamailio
config to see very verbose debug
messages. If you don't get any,
means the request does not reach the
application layer, meaning you have
a firewall in place that drops the
packets from the network.<br>
<br>
Cheers,<br>
Daniel </blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote> On 5/29/12 8:02 AM,
Faisal Yousuf wrote:<br>
<br>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> Hi Experts,
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> I am a
newbee with SIP-Router/Kamailio -
I installed Kamailio on a CentOS
5.5 VM - following the
instructions from the following
link </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <a
moz-do-not-send="true"
href="http://kb.asipto.com/kamailio:install:3.0.x-from-git-centos5x"
target="_blank">http://kb.asipto.com/kamailio:install:3.0.x-from-git-centos5x</a>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> Kamailio is
installed & I can start
kamailio deamon from service
kamailio start </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> However I
also created two subscribers - but
when I try to register my SIP
Phone (by setting Kamailio as the
domain to register to) - I can see
my sip-phone sending the Register
request to Kamailio (I put a
tcpdump on the kamailio machine to
see sip-messages reaching the
host) but I dont get any response
from Kamailio - so my sip phone
reaches the 408 Registeration
Timeout state. </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> Now, I dont
get any logs from Kamailio to know
what is happening while my phone
is sending the register request -
I tried to configure logging
following instructions from the
following link </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <a
moz-do-not-send="true"
href="http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration"
target="_blank">http://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration</a>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> But I dont
get any logs in the
/var/log/kamailio log file. </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> To assist
in understanding the issue - I am
attaching the syslog config ,
kamailio config file & the
kamailio service script in the
init.d folder. </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> My first
objective will be to enable
logging for kamailio & the
next objective is to get the basic
registration & routing between
endpoints - my ultimate objective
is to configure SER/Kamailio as a
load-balancer for our B2BUA &
Media Servers (I found the
dispatcher module can help in
accomplishing this) - Can anybody
help me in identifying why I am
not getting any logs ? </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> I have
already seen the wiki & have
developed some understanding
regarding how Kamailio is
configured but am I seeking more
information regarding the route
language - (the state-model +
reference of the functions that
can be used in the route script
etc.) - in this regards if I can
get any documentation pointers
from the user community that can
help me gain a better
understanding the use of Kamailio
for above it will be great </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> Regards, </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> Faisal </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> Regards, </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> Faisal </blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE"> <br>
<br>
<br>
</blockquote>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote>
<blockquote type="CITE">
<pre>_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
<a moz-do-not-send="true" href="mailto:sr-users@lists.sip-router.org" target="_blank">sr-users@lists.sip-router.org</a>
<a moz-do-not-send="true" href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users" target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a>
</pre>
</blockquote>
<br>
<pre><font color="#888888">-- </font>
<font color="#888888">Daniel-Constantin Mierla - <a moz-do-not-send="true" href="http://www.asipto.com" target="_blank">http://www.asipto.com</a></font>
<font color="#888888"><a moz-do-not-send="true" href="http://twitter.com/#%21/miconda" target="_blank">http://twitter.com/#!/miconda</a> - <a moz-do-not-send="true" href="http://www.linkedin.com/in/miconda" target="_blank">http://www.linkedin.com/in/miconda</a></font>
<font color="#888888">Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - <a moz-do-not-send="true" href="http://asipto.com/u/katu" target="_blank">http://asipto.com/u/katu</a></font>
</pre>
<br>
<br>
<br>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote>
<blockquote> <br>
_______________________________________________<br>
SIP Express Router (SER) and
Kamailio (OpenSER) - sr-users
mailing list<br>
<a moz-do-not-send="true"
href="mailto:sr-users@lists.sip-router.org"
target="_blank">sr-users@lists.sip-router.org</a><br>
<a moz-do-not-send="true"
href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users"
target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a><br>
<br>
</blockquote>
</blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
<br>
</blockquote>
</blockquote>
<blockquote>
<blockquote> <br>
_______________________________________________<br>
SIP Express Router (SER) and Kamailio
(OpenSER) - sr-users mailing list<br>
<a moz-do-not-send="true"
href="mailto:sr-users@lists.sip-router.org"
target="_blank">sr-users@lists.sip-router.org</a><br>
<a moz-do-not-send="true"
href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users"
target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a><br>
<br>
</blockquote>
</blockquote>
<blockquote> <br>
<br>
</blockquote>
<blockquote> <br>
_______________________________________________<br>
SIP Express Router (SER) and Kamailio
(OpenSER) - sr-users mailing list<br>
<a moz-do-not-send="true"
href="mailto:sr-users@lists.sip-router.org"
target="_blank">sr-users@lists.sip-router.org</a><br>
<a moz-do-not-send="true"
href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users"
target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a><br>
<br>
</blockquote>
<br>
<br>
<pre>_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
<a moz-do-not-send="true" href="mailto:sr-users@lists.sip-router.org" target="_blank">sr-users@lists.sip-router.org</a>
<a moz-do-not-send="true" href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users" target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a>
</pre>
</div>
</div>
</div>
<br>
_______________________________________________<br>
SIP Express Router (SER) and Kamailio (OpenSER)
- sr-users mailing list<br>
<a moz-do-not-send="true"
href="mailto:sr-users@lists.sip-router.org"
target="_blank">sr-users@lists.sip-router.org</a><br>
<a moz-do-not-send="true"
href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users"
target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a><br>
<br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
</div>
<br>
_______________________________________________<br>
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list<br>
<a moz-do-not-send="true"
href="mailto:sr-users@lists.sip-router.org">sr-users@lists.sip-router.org</a><br>
<a moz-do-not-send="true"
href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users"
target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a><br>
<br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:sr-users@lists.sip-router.org">sr-users@lists.sip-router.org</a>
<a class="moz-txt-link-freetext" href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a>
</pre>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
Daniel-Constantin Mierla - <a class="moz-txt-link-freetext" href="http://www.asipto.com">http://www.asipto.com</a>
<a class="moz-txt-link-freetext" href="http://twitter.com/#!/miconda">http://twitter.com/#!/miconda</a> - <a class="moz-txt-link-freetext" href="http://www.linkedin.com/in/miconda">http://www.linkedin.com/in/miconda</a>
Kamailio Advanced Training, Seattle, USA, Sep 23-26, 2012 - <a class="moz-txt-link-freetext" href="http://asipto.com/u/katu">http://asipto.com/u/katu</a></pre>
<br>
<br>
</body>
</html>