# Image Version
image_version: P0S3-8-12-00


# Proxy Server
proxy1_address: "proxyIP"

# Proxy Server Port (default - 5060)
proxy1_port:"5060"

# Proxy Registration (0-disable (default), 1-enable)
proxy_register: 1

####### New Parameters added in Release 2.0 #######

# All user_parameters have been removed

# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "test1"

# Outbound Proxy Support
outbound_proxy: "proxyIP"
outbound_proxy_port: 5060       ; default is 5060

# Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)
sntp_server: "IPaddress"                   ; SNTP Server IP Address
sntp_mode: unicast      ; unicast, multicast, anycast, or directedbroadcast (default)


# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: 3600

# Codec for media stream (g711ulaw (default), g711alaw, g729a)
preferred_codec:  g729a

# TOS bits in media stream [0-5] (Default - 5)
tos_media: 5

# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: 0

# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
dtmf_outofband: avt_always

# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: 3

# SIP Timers
timer_t1: 500                   ; Default 500 msec
timer_t2: 4000                  ; Default 4 sec
sip_retx: 10                    ; Default 10
sip_invite_retx: 6              ; Default 6
timer_invite_expires: 180       ; Default 180 sec

# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: 0                  ; Default 0 (Do Not Disturb feature is off)

# Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: 0            ; Default 0 (Disable sending all calls as anonymous)

# Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: 0         ; Default 0 (Disable blocking of anonymous calls)

# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: 101           ; Default 101

# Sync value of the phone used for remote reset
sync: 1                         ; Default 1

####### New Parameters added in Release 2.1 #######

# Backup Proxy Support
#proxy_backup: "proxyIP"
#proxy_backup: "proxyIP"

# Emergency Proxy Support
#proxy_emergency: "proxyIP"
#proxy_emergency_port: 5060     ; Emergency Proxy port (default is 5060)

# Configurable VAD option
enable_vad: 0                   ; VAD setting 0-disable (Default), 1-enable

####### New Parameters added in Release 2.2 ######

# NAT/Firewall Traversal
nat_enable: 1                   ; 0-Disabled (default), 1-Enabled
#nat_address: ""                        ; WAN IP address of NAT box (dotted IP or DNS A record only)
#voip_control_port: 5060        ; UDP port used for SIP messages (default - 5060)
start_media_port: 10000         ; Start RTP range for media (default - 16384)
end_media_port: 20000           ; End RTP range for media (default - 32766)
#nat_received_processing: 0     ; 0-Disabled (default), 1-Enabled


####### New Parameter added in Release 3.0 #######

# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable : 1             ; 0-Disabled, 1-Enabled (default)

####### New Parameters added in Release 3.1 #######

# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: 1       ; 0-Disabled, 1-Enabled (default)

# Telnet Level (enable or disable the ability to telnet into the phone)
telnet_level: 2                 ; 0-Disabled (default), 1-Enabled, 2-Privileged

####### New Parameters added in Release 4.0 #######

# XML URLs
services_url: "http://xxx"

directory_url: "http://xxx"

//logo_url: "http://xxx.bmp"
logo_url: "http://xxx.bmp"

# HTTP Proxy Support
http_proxy_addr: ""             ; Address of HTTP Proxy server
http_proxy_port: 80             ; Port of HTTP Proxy Server (80-default)

# Dynamic DNS/TFTP Support
dyn_dns_addr_1: ""              ; restricted to dotted IP
dyn_dns_addr_2: ""              ; restricted to dotted IP
dyn_tftp_addr: ""               ; restricted to dotted IP

# Remote Party ID
remote_party_id: 1              ; 0-Disabled (default), 1-Enabled

####### New Parameters added in Release 4.4 #######

# Call Hold Ringback (0-off, 1-on, 2-off with no user control, 3-on with no user control)
call_hold_ringback: 0           ; Default 0 (Call Hold Ringback feature is off)

####### New Parameters added in Release 6.0 #######

# Dialtone Stutter for MWI
stutter_msg_waiting: 0          ; 0-Disabled (default), 1-Enabled

# RTP Call Statistics (SIP BYE/200 OK message exchange)
call_stats: 0                   ; 0-Disabled (default), 1-Enabled


################################

# SIP Configuration Generic File


# Line 2 appearance
line2_name: "UNPROVISIONED"

# Line 2 Registration Authentication
line2_authname: "UNPROVISIONED"

# Line 2 Registration Password
line2_password: "UNPROVISIONED"


####### New Parameters added in Release 2.0 #######

# All user_parameters have been removed

# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "test1"


# SIP Configuration Generic File

# Line 1 appearance
line1_name: "2023-tenant"
line1_authname: "2023-tenant"
line1_shortname: "2023 Larry Davis
line1_password: "supersecret"

# Setting for Message speeddial to UOne box
line1_displayname: "Larry Davis"
messages_uri: "*71"
mwi_status : "1"

dial_template: "dialplan_test1_"