<div dir="ltr"><div><div>Hi,<br><br></div>I have setup kamailio 4.1.0 on an EC2 xlarge instance. The voice and video calls seem to work well when both the devices are connected to the same network, however, when one device connects to a different network (the two devices now are on different networks), they are able to register on SIP server, and even call can be triggered and accepted between the two devices but there is no video/audio transmission.<br>
<br></div><div>I have setup rtpproxy but i don't know whether it's working or not. <br><br></div><div>Any help on this would be highly appreciated.<br><br></div><div><br></div>Following is my kamailio.cfg file:<br>
<br>#!define WITH_DEBUG<br>#!define WITH_MYSQL<br>#!define WITH_AUTH<br>#!define WITH_NAT<br>#!define WITH_USRLOCDB<br><br>tcp_async = yes<br>tcp_connect_timeout=5<br><br>#!KAMAILIO<br>#<br># Kamailio (OpenSER) SIP Server v4.1 - default configuration script<br>
#     - web: <a href="http://www.kamailio.org">http://www.kamailio.org</a><br>#     - git: <a href="http://sip-router.org">http://sip-router.org</a><br>#<br># Direct your questions about this file to: <<a href="mailto:sr-users@lists.sip-router.org">sr-users@lists.sip-router.org</a>><br>
#<br># Refer to the Core CookBook at <a href="http://www.kamailio.org/wiki/">http://www.kamailio.org/wiki/</a><br># for an explanation of possible statements, functions and parameters.<br>#<br># Several features can be enabled using '#!define WITH_FEATURE' directives:<br>
#<br># *** To run in debug mode: <br>#     - define WITH_DEBUG<br>#<br># *** To enable mysql: <br>#     - define WITH_MYSQL<br>#<br># *** To enable authentication execute:<br>#     - enable mysql<br>#     - define WITH_AUTH<br>
#     - add users using 'kamctl'<br>#<br># *** To enable IP authentication execute:<br>#     - enable mysql<br>#     - enable authentication<br>#     - define WITH_IPAUTH<br>#     - add IP addresses with group id '1' to 'address' table<br>
#<br># *** To enable persistent user location execute:<br>#     - enable mysql<br>#     - define WITH_USRLOCDB<br>#<br># *** To enable presence server execute:<br>#     - enable mysql<br>#     - define WITH_PRESENCE<br>#<br>
# *** To enable nat traversal execute:<br>#     - define WITH_NAT<br>#     - install RTPProxy: <a href="http://www.rtpproxy.org">http://www.rtpproxy.org</a><br>#     - start RTPProxy:<br>#        rtpproxy -l _your_public_ip_ -s udp:localhost:7722<br>
#<br># *** To enable PSTN gateway routing execute:<br>#     - define WITH_PSTN<br>#     - set the value of pstn.gw_ip<br>#     - check route[PSTN] for regexp routing condition<br>#<br># *** To enable database aliases lookup execute:<br>
#     - enable mysql<br>#     - define WITH_ALIASDB<br>#<br># *** To enable speed dial lookup execute:<br>#     - enable mysql<br>#     - define WITH_SPEEDDIAL<br>#<br># *** To enable multi-domain support execute:<br>#     - enable mysql<br>
#     - define WITH_MULTIDOMAIN<br>#<br># *** To enable TLS support execute:<br>#     - adjust CFGDIR/tls.cfg as needed<br>#     - define WITH_TLS<br>#<br># *** To enable XMLRPC support execute:<br>#     - define WITH_XMLRPC<br>
#     - adjust route[XMLRPC] for access policy<br>#<br># *** To enable anti-flood detection execute:<br>#     - adjust pike and htable=>ipban settings as needed (default is<br>#       block if more than 16 requests in 2 seconds and ban for 300 seconds)<br>
#     - define WITH_ANTIFLOOD<br>#<br># *** To block 3XX redirect replies execute:<br>#     - define WITH_BLOCK3XX<br>#<br># *** To enable VoiceMail routing execute:<br>#     - define WITH_VOICEMAIL<br>#     - set the value of voicemail.srv_ip<br>
#     - adjust the value of voicemail.srv_port<br>#<br># *** To enhance accounting execute:<br>#     - enable mysql<br>#     - define WITH_ACCDB<br>#     - add following columns to database<br>#!ifdef ACCDB_COMMENT<br>  ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';<br>
  ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';<br>  ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default '';<br>  ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';<br>
  ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';<br>  ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';<br>  ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';<br>
  ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';<br>  ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default '';<br>  ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';<br>
  ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';<br>  ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';<br>#!endif<br><br>####### Include Local Config If Exists #########<br>
import_file "kamailio-local.cfg"<br><br>####### Defined Values #########<br><br># *** Value defines - IDs used later in config<br>#!ifdef WITH_MYSQL<br># - database URL - used to connect to database server by modules such<br>
#       as: auth_db, acc, usrloc, a.s.o.<br>#!ifndef DBURL<br>#!define DBURL "mysql://root:root@localhost/kamailio"<br>#!endif<br>#!endif<br>#!ifdef WITH_MULTIDOMAIN<br># - the value for 'use_domain' parameters<br>
#!define MULTIDOMAIN 1<br>#!else<br>#!define MULTIDOMAIN 0<br>#!endif<br><br># - flags<br>#   FLT_ - per transaction (message) flags<br>#    FLB_ - per branch flags<br>#!define FLT_ACC 1<br>#!define FLT_ACCMISSED 2<br>#!define FLT_ACCFAILED 3<br>
#!define FLT_NATS 5<br><br>#!define FLB_NATB 6<br>#!define FLB_NATSIPPING 7<br><br>####### Global Parameters #########<br><br>### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR<br>#!ifdef WITH_DEBUG<br>debug=4<br>log_stderror=yes<br>
#!else<br>debug=2<br>log_stderror=no<br>#!endif<br><br>memdbg=5<br>memlog=5<br><br>log_facility=LOG_LOCAL0<br><br>fork=yes<br>children=4<br><br>/* uncomment the next line to disable TCP (default on) */<br>#disable_tcp=yes<br>
<br>/* uncomment the next line to disable the auto discovery of local aliases<br>   based on reverse DNS on IPs (default on) */<br>auto_aliases=no<br><br>/* add local domain aliases */<br>alias="<a href="http://xyz.com">xyz.com</a>"<br>
<br>/* uncomment and configure the following line if you want Kamailio to <br>   bind on a specific interface/port/proto (default bind on all available) */<br>#listen=udp:<a href="http://10.0.0.10:5060">10.0.0.10:5060</a><br>
listen=tcp:<a href="http://172.31.47.138:5060">172.31.47.138:5060</a> advertise 54.191.193.***:5060<br><br>/* port to listen to<br> * - can be specified more than once if needed to listen on many ports */<br>port=5060<br>
<br>#!ifdef WITH_TLS<br>enable_tls=yes<br>#!endif<br><br># life time of TCP connection when there is no traffic<br># - a bit higher than registration expires to cope with UA behind NAT<br>tcp_connection_lifetime=3605<br><br>
####### Custom Parameters #########<br><br># These parameters can be modified runtime via RPC interface<br># - see the documentation of 'cfg_rpc' module.<br>#<br># Format: <a href="http://group.id">group.id</a> = value 'desc' description<br>
# Access: $sel(<a href="http://cfg_get.group.id">cfg_get.group.id</a>) or @<a href="http://cfg_get.group.id">cfg_get.group.id</a><br>#<br><br>#!ifdef WITH_PSTN<br># PSTN GW Routing<br>#<br># - pstn.gw_ip: valid IP or hostname as string value, example:<br>
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"<br>#<br># - by default is empty to avoid misrouting<br>pstn.gw_ip = "" desc "PSTN GW Address"<br>pstn.gw_port = "" desc "PSTN GW Port"<br>
#!endif<br><br>#!ifdef WITH_VOICEMAIL<br># VoiceMail Routing on offline, busy or no answer<br>#<br># - by default Voicemail server IP is empty to avoid misrouting<br>voicemail.srv_ip = "" desc "VoiceMail IP Address"<br>
voicemail.srv_port = "5060" desc "VoiceMail Port"<br>#!endif<br><br>####### Modules Section ########<br><br># set paths to location of modules (to sources or installation folders)<br>#!ifdef WITH_SRCPATH<br>
mpath="modules/"<br>#!else<br>mpath="/usr/local/lib64/kamailio/modules/"<br>#!endif<br><br>#!ifdef WITH_MYSQL<br>loadmodule "db_mysql.so"<br>#!endif<br><br>loadmodule "mi_fifo.so"<br>
loadmodule "kex.so"<br>loadmodule "corex.so"<br>loadmodule "tm.so"<br>loadmodule "tmx.so"<br>loadmodule "sl.so"<br>loadmodule "rr.so"<br>loadmodule "pv.so"<br>
loadmodule "maxfwd.so"<br>loadmodule "usrloc.so"<br>loadmodule "registrar.so"<br>loadmodule "textops.so"<br>loadmodule "siputils.so"<br>loadmodule "xlog.so"<br>loadmodule "sanity.so"<br>
loadmodule "ctl.so"<br>loadmodule "cfg_rpc.so"<br>loadmodule "mi_rpc.so"<br>loadmodule "acc.so"<br><br>#!ifdef WITH_AUTH<br>loadmodule "auth.so"<br>loadmodule "auth_db.so"<br>
#!ifdef WITH_IPAUTH<br>loadmodule "permissions.so"<br>#!endif<br>#!endif<br><br>#!ifdef WITH_ALIASDB<br>loadmodule "alias_db.so"<br>#!endif<br><br>#!ifdef WITH_SPEEDDIAL<br>loadmodule "speeddial.so"<br>
#!endif<br><br>#!ifdef WITH_MULTIDOMAIN<br>loadmodule "domain.so"<br>#!endif<br><br>#!ifdef WITH_PRESENCE<br>loadmodule "presence.so"<br>loadmodule "presence_xml.so"<br>#!endif<br><br>#!ifdef WITH_NAT<br>
loadmodule "nathelper.so"<br>loadmodule "rtpproxy.so"<br>#!endif<br><br>#!ifdef WITH_TLS<br>loadmodule "tls.so"<br>#!endif<br><br>#!ifdef WITH_ANTIFLOOD<br>loadmodule "htable.so"<br>
loadmodule "pike.so"<br>#!endif<br><br>#!ifdef WITH_XMLRPC<br>loadmodule "xmlrpc.so"<br>#!endif<br><br>#!ifdef WITH_DEBUG<br>loadmodule "debugger.so"<br>#!endif<br><br># ----------------- setting module-specific parameters ---------------<br>
<br><br># ----- mi_fifo params -----<br>modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")<br><br><br># ----- tm params -----<br># auto-discard branches from previous serial forking leg<br>
modparam("tm", "failure_reply_mode", 3)<br># default retransmission timeout: 30sec<br>modparam("tm", "fr_timer", 30000)<br># default invite retransmission timeout after 1xx: 120sec<br>
modparam("tm", "fr_inv_timer", 120000)<br><br><br># ----- rr params -----<br># add value to ;lr param to cope with most of the UAs<br>modparam("rr", "enable_full_lr", 1)<br># do not append from tag to the RR (no need for this script)<br>
modparam("rr", "append_fromtag", 0)<br><br><br># ----- registrar params -----<br>modparam("registrar", "method_filtering", 1)<br>/* uncomment the next line to disable parallel forking via location */<br>
# modparam("registrar", "append_branches", 0)<br>/* uncomment the next line not to allow more than 10 contacts per AOR */<br>#modparam("registrar", "max_contacts", 10)<br># max value for expires of registrations<br>
modparam("registrar", "max_expires", 3600)<br># set it to 1 to enable GRUU<br>modparam("registrar", "gruu_enabled", 0)<br><br><br># ----- acc params -----<br>/* what special events should be accounted ? */<br>
modparam("acc", "early_media", 0)<br>modparam("acc", "report_ack", 0)<br>modparam("acc", "report_cancels", 0)<br>/* by default ww do not adjust the direct of the sequential requests.<br>
   if you enable this parameter, be sure the enable "append_fromtag"<br>   in "rr" module */<br>modparam("acc", "detect_direction", 0)<br>/* account triggers (flags) */<br>modparam("acc", "log_flag", FLT_ACC)<br>
modparam("acc", "log_missed_flag", FLT_ACCMISSED)<br>modparam("acc", "log_extra", <br>    "src_user=$fU;src_domain=$fd;src_ip=$si;"<br>    "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")<br>
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)<br>/* enhanced DB accounting */<br>#!ifdef WITH_ACCDB<br>modparam("acc", "db_flag", FLT_ACC)<br>modparam("acc", "db_missed_flag", FLT_ACCMISSED)<br>
modparam("acc", "db_url", DBURL)<br>modparam("acc", "db_extra",<br>    "src_user=$fU;src_domain=$fd;src_ip=$si;"<br>    "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")<br>
#!endif<br><br><br># ----- usrloc params -----<br>/* enable DB persistency for location entries */<br>#!ifdef WITH_USRLOCDB<br>modparam("usrloc", "db_url", DBURL)<br>modparam("usrloc", "db_mode", 2)<br>
modparam("usrloc", "use_domain", MULTIDOMAIN)<br>#!endif<br><br><br># ----- auth_db params -----<br>#!ifdef WITH_AUTH<br>modparam("auth_db", "db_url", DBURL)<br>modparam("auth_db", "calculate_ha1", yes)<br>
modparam("auth_db", "password_column", "password")<br>modparam("auth_db", "load_credentials", "")<br>modparam("auth_db", "use_domain", MULTIDOMAIN)<br>
<br># ----- permissions params -----<br>#!ifdef WITH_IPAUTH<br>modparam("permissions", "db_url", DBURL)<br>modparam("permissions", "db_mode", 1)<br>#!endif<br><br>#!endif<br><br><br>
# ----- alias_db params -----<br>#!ifdef WITH_ALIASDB<br>modparam("alias_db", "db_url", DBURL)<br>modparam("alias_db", "use_domain", MULTIDOMAIN)<br>#!endif<br><br><br># ----- speeddial params -----<br>
#!ifdef WITH_SPEEDDIAL<br>modparam("speeddial", "db_url", DBURL)<br>modparam("speeddial", "use_domain", MULTIDOMAIN)<br>#!endif<br><br><br># ----- domain params -----<br>#!ifdef WITH_MULTIDOMAIN<br>
modparam("domain", "db_url", DBURL)<br># register callback to match myself condition with domains list<br>modparam("domain", "register_myself", 1)<br>#!endif<br><br><br>#!ifdef WITH_PRESENCE<br>
# ----- presence params -----<br>modparam("presence", "db_url", DBURL)<br><br># ----- presence_xml params -----<br>modparam("presence_xml", "db_url", DBURL)<br>modparam("presence_xml", "force_active", 1)<br>
#!endif<br><br><br>#!ifdef WITH_NAT<br># ----- rtpproxy params -----<br>modparam("rtpproxy", "rtpproxy_sock", "udp:<a href="http://127.0.0.1:7722">127.0.0.1:7722</a>")<br><br># ----- nathelper params -----<br>
modparam("nathelper", "natping_interval", 30)<br>modparam("nathelper", "ping_nated_only", 1)<br>modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)<br>modparam("nathelper", "sipping_from", "sip:<a href="http://xyz.com">xyz.com</a>")<br>
<br># params needed for NAT traversal in other modules<br>modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")<br>modparam("usrloc", "nat_bflag", FLB_NATB)<br>
#!endif<br><br><br>#!ifdef WITH_TLS<br># ----- tls params -----<br>modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg")<br>#!endif<br><br>#!ifdef WITH_ANTIFLOOD<br># ----- pike params -----<br>
modparam("pike", "sampling_time_unit", 2)<br>modparam("pike", "reqs_density_per_unit", 16)<br>modparam("pike", "remove_latency", 4)<br><br># ----- htable params -----<br>
# ip ban htable with autoexpire after 5 minutes<br>modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")<br>#!endif<br><br>#!ifdef WITH_XMLRPC<br># ----- xmlrpc params -----<br>modparam("xmlrpc", "route", "XMLRPC");<br>
modparam("xmlrpc", "url_match", "^/RPC")<br>#!endif<br><br>#!ifdef WITH_DEBUG<br># ----- debugger params -----<br>modparam("debugger", "cfgtrace", 1)<br>#!endif<br><br>####### Routing Logic ########<br>
<br><br># Main SIP request routing logic<br># - processing of any incoming SIP request starts with this route<br># - note: this is the same as route { ... }<br>request_route {<br><br>    # per request initial checks<br>    route(REQINIT);<br>
<br>    # NAT detection<br>    route(NATDETECT);<br><br>    # CANCEL processing<br>    if (is_method("CANCEL"))<br>    {<br>        if (t_check_trans()) {<br>            route(RELAY);<br>        }<br>        exit;<br>
    }<br><br>    # handle requests within SIP dialogs<br>    route(WITHINDLG);<br><br>    ### only initial requests (no To tag)<br><br>    t_check_trans();<br><br>    # authentication<br>    route(AUTH);<br><br>    # record routing for dialog forming requests (in case they are routed)<br>
    # - remove preloaded route headers<br>    remove_hf("Route");<br>    if (is_method("INVITE|SUBSCRIBE"))<br>        record_route();<br><br>    # account only INVITEs<br>    if (is_method("INVITE"))<br>
    {<br>        setflag(FLT_ACC); # do accounting<br>    }<br><br>    # dispatch requests to foreign domains<br>    route(SIPOUT);<br><br>    ### requests for my local domains<br><br>    # handle presence related requests<br>
    route(PRESENCE);<br><br>    # handle registrations<br>    route(REGISTRAR);<br><br>    if ($rU==$null)<br>    {<br>        # request with no Username in RURI<br>        sl_send_reply("484","Address Incomplete");<br>
        exit;<br>    }<br><br>    # dispatch destinations to PSTN<br>    route(PSTN);<br><br>    # user location service<br>    route(LOCATION);<br>}<br><br><br>route[RELAY] {<br><br>    # enable additional event routes for forwarded requests<br>
    # - serial forking, RTP relaying handling, a.s.o.<br>    if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {<br>        if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH");<br>    }<br>
    if (is_method("INVITE|SUBSCRIBE|UPDATE")) {<br>        if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY");<br>    }<br>    if (is_method("INVITE")) {<br>        if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE");<br>
    }<br><br>    if (!t_relay()) {<br>        sl_reply_error();<br>    }<br>    exit;<br>}<br><br># Per SIP request initial checks<br>route[REQINIT] {<br>#!ifdef WITH_ANTIFLOOD<br>    # flood dection from same IP and traffic ban for a while<br>
    # be sure you exclude checking trusted peers, such as pstn gateways<br>    # - local host excluded (e.g., loop to self)<br>    if(src_ip!=myself)<br>    {<br>        if($sht(ipban=>$si)!=$null)<br>        {<br>            # ip is already blocked<br>
            xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");<br>            exit;<br>        }<br>        if (!pike_check_req())<br>        {<br>            xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");<br>
            $sht(ipban=>$si) = 1;<br>            exit;<br>        }<br>    }<br>#!endif<br><br>    if (!mf_process_maxfwd_header("10")) {<br>        sl_send_reply("483","Too Many Hops");<br>
        exit;<br>    }<br><br>    if(!sanity_check("1511", "7"))<br>    {<br>        xlog("Malformed SIP message from $si:$sp\n");<br>        exit;<br>    }<br>}<br><br># Handle requests within SIP dialogs<br>
route[WITHINDLG] {<br>    if (has_totag()) {<br>        # sequential request withing a dialog should<br>        # take the path determined by record-routing<br>        if (loose_route()) {<br>            route(DLGURI);<br>
            if (is_method("BYE")) {<br>                setflag(FLT_ACC); # do accounting ...<br>                setflag(FLT_ACCFAILED); # ... even if the transaction fails<br>            }<br>            else if ( is_method("ACK") ) {<br>
                # ACK is forwarded statelessy<br>                route(NATMANAGE);<br>            }<br>            else if ( is_method("NOTIFY") ) {<br>                # Add Record-Route for in-dialog NOTIFY as per RFC 6665.<br>
                record_route();<br>            }<br>            route(RELAY);<br>        } else {<br>            if (is_method("SUBSCRIBE") && uri == myself) {<br>                # in-dialog subscribe requests<br>
                route(PRESENCE);<br>                exit;<br>            }<br>            if ( is_method("ACK") ) {<br>                if ( t_check_trans() ) {<br>                    # no loose-route, but stateful ACK;<br>
                    # must be an ACK after a 487<br>                    # or e.g. 404 from upstream server<br>                    route(RELAY);<br>                    exit;<br>                } else {<br>                    # ACK without matching transaction ... ignore and discard<br>
                    exit;<br>                }<br>            }<br>            sl_send_reply("404","Not here");<br>        }<br>        exit;<br>    }<br>}<br><br># Handle SIP registrations<br>route[REGISTRAR] {<br>
    if (is_method("REGISTER"))<br>    {<br>        if(isflagset(FLT_NATS))<br>        {<br>            setbflag(FLB_NATB);<br>            # uncomment next line to do SIP NAT pinging <br>            setbflag(FLB_NATSIPPING);<br>
        }<br>        if (!save("location"))<br>            sl_reply_error();<br><br>        exit;<br>    }<br>}<br><br># USER location service<br>route[LOCATION] {<br><br>#!ifdef WITH_SPEEDDIAL<br>    # search for short dialing - 2-digit extension<br>
    if($rU=~"^[0-9][0-9]$")<br>        if(sd_lookup("speed_dial"))<br>            route(SIPOUT);<br>#!endif<br><br>#!ifdef WITH_ALIASDB<br>    # search in DB-based aliases<br>    if(alias_db_lookup("dbaliases"))<br>
        route(SIPOUT);<br>#!endif<br><br>    $avp(oexten) = $rU;<br>    if (!lookup("location")) {<br>        $var(rc) = $rc;<br>        route(TOVOICEMAIL);<br>        t_newtran();<br>        switch ($var(rc)) {<br>
            case -1:<br>            case -3:<br>                send_reply("404", "Not Found");<br>                exit;<br>            case -2:<br>                send_reply("405", "Method Not Allowed");<br>
                exit;<br>        }<br>    }<br><br>    # when routing via usrloc, log the missed calls also<br>    if (is_method("INVITE"))<br>    {<br>        setflag(FLT_ACCMISSED);<br>    }<br><br>    route(RELAY);<br>
    exit;<br>}<br><br># Presence server route<br>route[PRESENCE] {<br>    if(!is_method("PUBLISH|SUBSCRIBE"))<br>        return;<br><br>    if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") {<br>
        route(TOVOICEMAIL);<br>        # returns here if no voicemail server is configured<br>        sl_send_reply("404", "No voicemail service");<br>        exit;<br>    }<br><br>#!ifdef WITH_PRESENCE<br>
    if (!t_newtran())<br>    {<br>        sl_reply_error();<br>        exit;<br>    }<br><br>    if(is_method("PUBLISH"))<br>    {<br>        handle_publish();<br>        t_release();<br>    } else if(is_method("SUBSCRIBE")) {<br>
        handle_subscribe();<br>        t_release();<br>    }<br>    exit;<br>#!endif<br>    <br>    # if presence enabled, this part will not be executed<br>    if (is_method("PUBLISH") || $rU==$null)<br>    {<br>
        sl_send_reply("404", "Not here");<br>        exit;<br>    }<br>    return;<br>}<br><br># Authentication route<br>route[AUTH] {<br>#!ifdef WITH_AUTH<br><br>#!ifdef WITH_IPAUTH<br>    if((!is_method("REGISTER")) && allow_source_address())<br>
    {<br>        # source IP allowed<br>        return;<br>    }<br>#!endif<br><br>    if (is_method("REGISTER") || from_uri==myself)<br>    {<br>        # authenticate requests<br>        if (!auth_check("$fd", "subscriber", "1")) {<br>
            auth_challenge("$fd", "0");<br>            exit;<br>        }<br>        # user authenticated - remove auth header<br>        if(!is_method("REGISTER|PUBLISH"))<br>            consume_credentials();<br>
    }<br>    # if caller is not local subscriber, then check if it calls<br>    # a local destination, otherwise deny, not an open relay here<br>    if (from_uri!=myself && uri!=myself)<br>    {<br>        sl_send_reply("403","Not relaying");<br>
        exit;<br>    }<br><br>#!endif<br>    return;<br>}<br><br># Caller NAT detection route<br>route[NATDETECT] {<br>#!ifdef WITH_NAT<br>    force_rport();<br>    if (nat_uac_test("19")) {<br>        if (is_method("REGISTER")) {<br>
            fix_nated_register();<br>        } else {<br>            if(is_first_hop())<br>                set_contact_alias();<br>        }<br>        setflag(FLT_NATS);<br>    }<br>#!endif<br>    return;<br>}<br><br># RTPProxy control<br>
route[NATMANAGE] {<br>#!ifdef WITH_NAT<br>    if (is_request()) {<br>        if(has_totag()) {<br>            if(check_route_param("nat=yes")) {<br>                setbflag(FLB_NATB);<br>            }<br>        }<br>
    }<br>    if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB)))<br>        return;<br><br>    rtpproxy_manage("co");<br><br>    if (is_request()) {<br>        if (!has_totag()) {<br>            if(t_is_branch_route()) {<br>
                add_rr_param(";nat=yes");<br>            }<br>        }<br>    }<br>    if (is_reply()) {<br>        if(isbflagset(FLB_NATB)) {<br>            if(is_first_hop())<br>                set_contact_alias();<br>
        }<br>    }<br>#!endif<br>    return;<br>}<br><br># URI update for dialog requests<br>route[DLGURI] {<br>#!ifdef WITH_NAT<br>    if(!isdsturiset()) {<br>        handle_ruri_alias();<br>    }<br>#!endif<br>    return;<br>
}<br><br># Routing to foreign domains<br>route[SIPOUT] {<br>    if (!uri==myself)<br>    {<br>        append_hf("P-hint: outbound\r\n");<br>        route(RELAY);<br>    }<br>}<br><br># PSTN GW routing<br>route[PSTN] {<br>
#!ifdef WITH_PSTN<br>    # check if PSTN GW IP is defined<br>    if (strempty($sel(cfg_get.pstn.gw_ip))) {<br>        xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n");<br>        return;<br>    }<br>
<br>    # route to PSTN dialed numbers starting with '+' or '00'<br>    #     (international format)<br>    # - update the condition to match your dialing rules for PSTN routing<br>    if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$"))<br>
        return;<br><br>    # only local users allowed to call<br>    if(from_uri!=myself) {<br>        sl_send_reply("403", "Not Allowed");<br>        exit;<br>    }<br><br>    if (strempty($sel(cfg_get.pstn.gw_port))) {<br>
        $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);<br>    } else {<br>        $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":"<br>                    + $sel(cfg_get.pstn.gw_port);<br>
    }<br><br>    route(RELAY);<br>    exit;<br>#!endif<br><br>    return;<br>}<br><br># XMLRPC routing<br>#!ifdef WITH_XMLRPC<br>route[XMLRPC] {<br>    # allow XMLRPC from localhost<br>    if ((method=="POST" || method=="GET")<br>
            && (src_ip==127.0.0.1)) {<br>        # close connection only for xmlrpclib user agents (there is a bug in<br>        # xmlrpclib: it waits for EOF before interpreting the response).<br>        if ($hdr(User-Agent) =~ "xmlrpclib")<br>
            set_reply_close();<br>        set_reply_no_connect();<br>        dispatch_rpc();<br>        exit;<br>    }<br>    send_reply("403", "Forbidden");<br>    exit;<br>}<br>#!endif<br><br># route to voicemail server<br>
route[TOVOICEMAIL] {<br>#!ifdef WITH_VOICEMAIL<br>    if(!is_method("INVITE|SUBSCRIBE"))<br>        return;<br><br>    # check if VoiceMail server IP is defined<br>    if (strempty($sel(cfg_get.voicemail.srv_ip))) {<br>
        xlog("SCRIPT: VoiceMail rotuing enabled but IP not defined\n");<br>        return;<br>    }<br>    if(is_method("INVITE")) {<br>        if($avp(oexten)==$null)<br>            return;<br>        $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip)<br>
                + ":" + $sel(cfg_get.voicemail.srv_port);<br>    } else {<br>        if($rU==$null)<br>            return;<br>        $ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip)<br>
                + ":" + $sel(cfg_get.voicemail.srv_port);<br>    }<br>    route(RELAY);<br>    exit;<br>#!endif<br><br>    return;<br>}<br><br># manage outgoing branches<br>branch_route[MANAGE_BRANCH] {<br>    xdbg("new branch [$T_branch_idx] to $ru\n");<br>
    route(NATMANAGE);<br>}<br><br># manage incoming replies<br>onreply_route[MANAGE_REPLY] {<br>    xdbg("incoming reply\n");<br>    if(status=~"[12][0-9][0-9]")<br>        route(NATMANAGE);<br>}<br><br>
# manage failure routing cases<br>failure_route[MANAGE_FAILURE] {<br>    route(NATMANAGE);<br><br>    if (t_is_canceled()) {<br>        exit;<br>    }<br><br>#!ifdef WITH_BLOCK3XX<br>    # block call redirect based on 3xx replies.<br>
    if (t_check_status("3[0-9][0-9]")) {<br>        t_reply("404","Not found");<br>        exit;<br>    }<br>#!endif<br><br>#!ifdef WITH_VOICEMAIL<br>    # serial forking<br>    # - route to voicemail on busy or no answer (timeout)<br>
    if (t_check_status("486|408")) {<br>        $du = $null;<br>        route(TOVOICEMAIL);<br>        exit;<br>    }<br>#!endif<br>}<br> <br></div>