<div dir="ltr"><div><div>Hi,<br><br></div>We have a bit of confusion regarding tcp_connecton_timeout core parameter. The documentation says,<br><br>--<br>Lifetime in seconds for TCP sessions. TCP sessions which are inactive for longer than <strong>tcp_connection_lifetime</strong> will be closed by Kamailio.<br>--<br><br></div><div>However we observe a strange behaviour.<br><br>1. The connection is NOT closed by Kamailio unless we additionally set "close_expired_tcp" parameter in usrloc module,<br><br></div><div>2. Secondly, if we set this parameter to a smaller value say 70 seconds while sip register expiry is 600 seconds (and close_expired_tcp parameter enabled in usrloc module), the connection still remains active (tested after keeping it idle for 120 seconds then sending a sip request on this connection, we expected the request to fail but it does not fails).<br><br></div><div>3. if we set this parameter to greater then sip register value, e.g. 610 seconds and set close_expired_tcp parameter in usrloc, then we observe disconnect after about 8-10 minutes. Whereas we expect it to continue since user is re-registering every 600 seconds.<br><br></div><div>Can you guys explain why this is happening? What keeps a tcp connection active or makes it inactive? <br><br>We are using websockets (which use TCP at lower layer) and we observe there is no websocket frame sent or received over the tcp connection, yet it remain active after tcp_connection_lifetime in case 2 above and becomes inactive in case 3.<br><br></div><div>We are using Kamailio v4.3.1 SVN Rev. 4717b5 on Debian Wheezy 32bit OS.<br></div><div><br></div><div>Please suggest.<br><br></div><div>Thank you.<br></div><div><br><br></div></div>