<div dir="ltr">Hello Danel,<div>Thank you for your response,</div><div><br></div><div>Well i don't have SELinux enabled and IPTables isn't running.</div><div><br></div><div>About kamailio configuration, Pike module isn't also enabled, the only thing that i have enabled to limit the number of concurrent calls is the dialog module, counting the number of active dialogs and reject next new invites only after it has reached the 10.000 simultaneous calls.</div><div><br></div><div>The strange behavior is that kamailio only stop processing some sip messages like Byes and 200 Ok after more or less 40 seconds after siptester start sending calls.<br></div><div><br></div><div>And i can see several cases in wireshark that kamailio receives BYES/200OK from interface B(Carriers interface) but it isn't forward to Interface A(customer interface), if i make for example 20cps i don't have this issue, all packets are handled correctly and there isn't 408 requests timeouts.</div><div><br></div><div><br></div><div>Best Regards</div><div>José Seabra</div><div><br></div><div> </div></div><div class="gmail_extra"><br><div class="gmail_quote">2015-09-27 13:52 GMT+01:00 Daniel-Constantin Mierla <span dir="ltr"><<a href="mailto:miconda@gmail.com" target="_blank">miconda@gmail.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div bgcolor="#FFFFFF" text="#000000">
The tmp variable is not intialized by default, so it can be anything
therefore the out of bounds value. It used only when printing some
errors, so it didn't get a proper value as no such error was printed
for you case.<br>
<br>
The backtrace shows the process in in recvfrom(), so it waits for
traffic from network. That is the case when the processing of former
sip message was finished and now Kamailio waits to receive another
one.<br>
<br>
If you run centos, be sure you don't have limits in selinux rules -
better disable it completely and test again. Also, be sure you don't
have limits in the firewall, especially contrack module and sip
firewall modules in the kernel.<br>
<br>
In kamailio.cfg, if you have pike module, be sure you don't drop
good packet with this module.<br>
<br>
Cheers,<br>
Daniel<div><div class="h5"><br>
<br>
<div>On 25/09/15 19:53, José Seabra wrote:<br>
</div>
</div></div><blockquote type="cite"><div><div class="h5">
<div dir="ltr">
<div>Adding more information to my last email, when kamailio
starts receiving calls, after more or less 40 seconds it stops
processing some sip messages.</div>
<div><br>
</div>
I'm using the kamailio version 4.3.2
<div><br>
</div>
<div>Best Regards</div>
<div><br>
</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">2015-09-25 18:34 GMT+01:00 José Seabra
<span dir="ltr"><<a href="mailto:joseseabra4@gmail.com" target="_blank">joseseabra4@gmail.com</a>></span>:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">I have one kamailio server listening in 2
network interfaces, kamailio receives sip messages from
interface A and then send it to destine through interface
B.
<div>When we start kamailio service then run gdb for each
kamailio network interface process, execute the command
"bt full" the result is the following:</div>
<div><br>
<div><b>tmp = 0x5f801b994c4715bd <Address
0x5f801b994c4715bd out of bounds></b><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div>
<div>interface - A</div>
<div><br>
</div>
<div> bt full</div>
<div>#0 0x00007fb01bfa40c3 in recvfrom () from
/lib64/libc.so.6</div>
<div>No symbol table info available.</div>
<div>#1 0x000000000047f2ba in udp_rcv_loop () at
udp_server.c:421</div>
<div> len = 13</div>
<div> buf = '\000' <repeats 65535 times></div>
<div> tmp = 0x5f801b994c4715bd <Address
0x5f801b994c4715bd out of bounds></div>
<div> from = 0x7faf9bf38bb8</div>
<div> fromlen = 16</div>
<div> ri = {src_ip = {af = 2309178400, len =
32765, u = {addrl = {5458819, 4284160}, addr32 =
{5458819, 0, 4284160, 0}, addr16 = {19331, 83, 0, 0,
24320, 65, 0, 0}, </div>
<div> addr =
"\203KS\000\000\000\000\000\000_A\000\000\000\000"}},
dst_ip = {af = 2, len = 4, u = {addrl = {80026686,
0}, addr32 = {80026686, 0, 0, 0}, </div>
<div> addr16 = {7230, 1221, 0, 0, 0, 0,
0, 0}, addr = ">\034\305\004", '\000' <repeats
11 times>}}, src_port = 55576, dst_port = 5060,
proto_reserved1 = 0, </div>
<div> proto_reserved2 = 0, src_su = {s =
{sa_family = 32687, sa_data =
"\000\000\200D\243\211\375\177\000\000\213\337D"},
sin = {sin_family = 32687, sin_port = 0, </div>
<div> sin_addr = {s_addr = 2309178496},
sin_zero = "\375\177\000\000\213\337D"}, sin6 =
{sin6_family = 32687, sin6_port = 0, sin6_flowinfo =
2309178496, </div>
<div> sin6_addr = {__in6_u = {__u6_addr8
= "\375\177\000\000\213\337D\000\000\000\000\000p",
<incomplete sequence \372\233>, __u6_addr16 =
{32765, 0, 57227, </div>
<div> 68, 0, 0, 21616, 39930},
__u6_addr32 = {32765, 4513675, 0, 2616874096}}},
sin6_scope_id = 32687}}, bind_address =
0x7faf9becd7d8, proto = 1 '\001'}</div>
<div> __FUNCTION__ = "udp_rcv_loop"</div>
<div>#2 0x0000000000525eae in main_loop () at
main.c:1573</div>
<div> i = 0</div>
<div> pid = 0</div>
<div> si = 0x7faf9becd7d8</div>
<div> si_desc = "udp receiver child=0 sock=<a href="http://62.28.197.4:5060" target="_blank">62.28.197.4:5060</a>\000\000\000\000\000\000\001\000\000\000\000\000\000\000\260\244r\023n\000\000\000\071\263q\000\000\000\000\000\020\243q\000\000\000\000\000\b\000\000\000\001\000\000\000\260\373\371\233\257\177\000\000\220E\243\211\375\177\000\000|\351O\000\000\000\000\000\000\266\253\023\257\177\000\000\260\244r\023\257\177\000"</div>
<div>---Type <return> to continue, or q
<return> to quit---</div>
<div> nrprocs = 32</div>
<div> __FUNCTION__ = "main_loop"</div>
<div>#3 0x000000000052c395 in main (argc=11,
argv=0x7ffd89a34848) at main.c:2533</div>
<div> cfg_stream = 0x2296010</div>
<div> c = -1</div>
<div> r = 0</div>
<div> tmp = 0x7ffd89a35f61 ""</div>
<div> tmp_len = 0</div>
<div> port = 0</div>
<div> proto = 32688</div>
<div> options = 0x725010
":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:"</div>
<div> ret = -1</div>
<div> seed = 1641321572</div>
<div> rfd = 4</div>
<div> debug_save = 0</div>
<div> debug_flag = 0</div>
<div> dont_fork_cnt = 0</div>
<div> n_lst = 0x7ffd89a34710</div>
<div> p = 0x7fb01bf4c646
<intel_check_word+166>
"H\205\300t\025\017\266P\003\017\266\312D9\371\017\204",
<incomplete sequence \305></div>
<div> __FUNCTION__ = "main"</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div>interface B</div>
<div>bt full</div>
<div>#0 0x00007fb01bfa40c3 in recvfrom () from
/lib64/libc.so.6</div>
<div>No symbol table info available.</div>
<div>#1 0x000000000047f2ba in udp_rcv_loop () at
udp_server.c:421</div>
<div> len = 45</div>
<div><br>
</div>
<div> buf = '\000' <repeats 65535 times></div>
<div> tmp = 0x13cb2f24296000e9 <Address
0x13cb2f24296000e9 out of bounds></div>
<div> from = 0x7faf9bf38bb8</div>
<div> fromlen = 16</div>
<div> ri = {src_ip = {af = 2309178400, len =
32765, u = {addrl = {5458819, 4284160}, addr32 =
{5458819, 0, 4284160, 0}, addr16 = {19331, 83, 0, 0,
24320, 65, 0, 0}, addr =
"\203KS\000\000\000\000\000\000_A\000\000\000\000"}}, </div>
<div> dst_ip = {af = 2, len = 4, u = {addrl =
{2764381246, 0}, addr32 = {2764381246, 0, 0, 0},
addr16 = {7230, 42181, 0, 0, 0, 0, 0, 0}, addr =
">\034Ť", '\000' <repeats 11 times>}},
src_port = 56136, dst_port = 5060, </div>
<div> proto_reserved1 = 0, proto_reserved2 =
0, src_su = {s = {sa_family = 32687, sa_data =
"\000\000\200D\243\211\375\177\000\000\213\337D"},
sin = {sin_family = 32687, sin_port = 0, sin_addr =
{s_addr = 2309178496}, </div>
<div> sin_zero =
"\375\177\000\000\213\337D"}, sin6 = {sin6_family =
32687, sin6_port = 0, sin6_flowinfo = 2309178496,
sin6_addr = {__in6_u = {</div>
<div> __u6_addr8 =
"\375\177\000\000\213\337D\000\000\000\000\000p",
<incomplete sequence \372\233>, __u6_addr16 =
{32765, 0, 57227, 68, 0, 0, 21616, 39930},
__u6_addr32 = {32765, 4513675, 0, 2616874096}}}, </div>
<div> sin6_scope_id = 32687}},
bind_address = 0x7faf9becda08, proto = 1 '\001'}</div>
<div> __FUNCTION__ = "udp_rcv_loop"</div>
<div>#2 0x0000000000525eae in main_loop () at
main.c:1573</div>
<div>---Type <return> to continue, or q
<return> to quit---</div>
<div> i = 0</div>
<div> pid = 0</div>
<div> si = 0x7faf9becda08</div>
<div> si_desc = "udp receiver child=0 sock=<a href="http://62.28.197.164:5060" target="_blank">62.28.197.164:5060</a>\000\000\000\000\001\000\000\000\000\000\000\000\260\244r\023n\000\000\000\071\263q\000\000\000\000\000\020\243q\000\000\000\000\000\b\000\000\000\001\000\000\000\260\373\371\233\257\177\000\000\220E\243\211\375\177\000\000|\351O\000\000\000\000\000\000\266\253\023\257\177\000\000\260\244r\023\257\177\000"</div>
<div> nrprocs = 32</div>
<div> __FUNCTION__ = "main_loop"</div>
<div>#3 0x000000000052c395 in main (argc=11,
argv=0x7ffd89a34848) at main.c:2533</div>
<div> cfg_stream = 0x2296010</div>
<div> c = -1</div>
<div> r = 0</div>
<div> tmp = 0x7ffd89a35f61 ""</div>
<div> tmp_len = 0</div>
<div> port = 0</div>
<div> proto = 32688</div>
<div> options = 0x725010
":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:"</div>
<div>---Type <return> to continue, or q
<return> to quit---</div>
<div> ret = -1</div>
<div> seed = 1641321572</div>
<div> rfd = 4</div>
<div> debug_save = 0</div>
<div> debug_flag = 0</div>
<div> dont_fork_cnt = 0</div>
<div> n_lst = 0x7ffd89a34710</div>
<div> p = 0x7fb01bf4c646
<intel_check_word+166>
"H\205\300t\025\017\266P\003\017\266\312D9\371\017\204",
<incomplete sequence \305></div>
<div> __FUNCTION__ = "main"</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div>[root@c4-srv1 kamailio]# kamctl stats shmem</div>
<div>shmem:fragments = 2552</div>
<div>shmem:free_size = 2082764040</div>
<div>shmem:max_used_size = 66449600</div>
<div>shmem:real_used_size = 64719608</div>
<div>shmem:total_size = 2147483648</div>
<div>shmem:used_size = 54355992</div>
</div>
<div><br>
</div>
<div>Can anyone explain the meaning of </div>
<div><b>tmp = 0x5f801b994c4715bd <Address
0x5f801b994c4715bd out of bounds></b></div>
<div><br>
</div>
<div>Best Regards</div>
<span><font color="#888888">
<div>José Seabra<br clear="all">
<div><br>
</div>
</div>
</font></span></div>
</div>
</blockquote>
</div>
<br>
<br clear="all">
<div><br>
</div>
-- <br>
<div>Cumprimentos
<div>José Seabra</div>
</div>
</div>
<br>
<fieldset></fieldset>
<br>
</div></div><pre>_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
<a href="mailto:sr-users@lists.sip-router.org" target="_blank">sr-users@lists.sip-router.org</a>
<a href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users" target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a><span class="HOEnZb"><font color="#888888">
</font></span></pre><span class="HOEnZb"><font color="#888888">
</font></span></blockquote><span class="HOEnZb"><font color="#888888">
<br>
<pre cols="72">--
Daniel-Constantin Mierla
<a href="http://twitter.com/#!/miconda" target="_blank">http://twitter.com/#!/miconda</a> - <a href="http://www.linkedin.com/in/miconda" target="_blank">http://www.linkedin.com/in/miconda</a>
Book: SIP Routing With Kamailio - <a href="http://www.asipto.com" target="_blank">http://www.asipto.com</a>
Kamailio Advanced Training, Sep 28-30, 2015, in Berlin - <a href="http://asipto.com/u/kat" target="_blank">http://asipto.com/u/kat</a></pre>
</font></span></div>
<br>_______________________________________________<br>
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list<br>
<a href="mailto:sr-users@lists.sip-router.org">sr-users@lists.sip-router.org</a><br>
<a href="http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users" rel="noreferrer" target="_blank">http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users</a><br>
<br></blockquote></div><br></div><br clear="all"><div><br></div>-- <br><div class="gmail_signature">Cumprimentos<div>José Seabra</div></div>